지금 지원 담당자와 채팅
지원 담당자와 채팅

NetVault Bare Metal Recovery 11.0 - User Guide for Plug-ins

Introducing Dell™ NetVault™ Bare Metal Recovery Plug-ins Deploying NetVault Bare Metal Recovery Using the Plug-in Offline Client
Plug-in Server: an overview Installing and removing Plug-in Server Configuring Plug-in Server for use with Plug-in Offline Client Booting a NetVault Bare Metal Recovery Client with Plug-in Offline Client Backing up data with Plug-in Offline Client Restoring data with Plug-in Offline Client
Using NetVault Bare Metal Recovery Plug-in Live Client for Windows®
Plug-in Live Client for Windows: an overview Configuring Plug-in Server for use with Plug-in Live Client for Windows Installing and removing Plug-in Live Client for Windows® Backing up data with Plug-in Live Client for Windows® Booting a NetVault Bare Metal Recovery Client with Plug-in Offline Client Restoring data with Plug-in Live Client for Windows
Using NetVault Bare Metal Recovery Plug-in Live Client for Linux®
Plug-in Live Client for Linux: an overview Installing and removing Plug-in Live Client for Linux Generating a DR image for use with Plug-in Live Client for Linux Creating the required bootable CD for use with Plug-in Live Client for Linux Recovering a DR image for use with Plug-in Live Client for Linux
NetVault Bare Metal Recovery physical-to-virtual recovery Troubleshooting

Setting restore options for using Plug-in Offline Client to restore data as a VMDK Image

1
On the Create Selection Set page, click Edit Plugin Options, and select VMDK Images as the Restore Type.
This type of restore provides two additional options — either to restore the VMDK Image to a local directory of the NetVault Backup Server or to restore to a remote ESX® Server.
2
If you want to restore the VMDK Image to a local directory of the NetVault Backup Server, in the Local Target Directory box of the VMDK Recovery Options frame, enter a valid path to the location for storing recovered images.
If this field is left blank, the default is the NetVault Backup “temp” directory, “…/NetVault Backup/tmp.”
3
If you want to restore the VMDK Image to a remote ESX Server, complete the following steps:
a
Select the Restore to Remote ESX Server check box in the VMDK Recovery Options frame.
b
Enter the values for ESX Host, Port, Username, Password, and Path.
These options are required to restore VMDK Images directly to an ESX Server. This step is useful when there is no local storage space on the NetVault Backup Server machine or when using ESX Server.
•
ESX Host: Enter the host name or IP address of the ESX Server.
•
Port: Enter the remote console port on the ESX Server.
•
Username: Enter the user name to log on to the ESX Server.
•
Password: Enter the password for the specified user name.
•
Path: Enter the directory on the ESX Server where the VMDK files should be created. This path should always start with a datastore within square brackets — [datastore] dir. If the path specified does not exist, the plug-in cannot connect to the ESX Server.

Finalizing and submitting the job for using Plug-in Offline Client to restore data as a VMDK Image

The final steps include setting additional options on the Schedule, Source Options, and Advanced Options pages, submitting the job, and monitoring the progress through the Job Status and View Logs pages. These pages and options are common to all NetVault Backup Plug-ins. For more information, see the Dell NetVault Backup Administrator’s Guide.
1
Click Ok to save the settings, and then click Next.
2
In Job Name, specify a name for the job if you do not want to use the default setting.
Assign a descriptive name that lets you easily identify the job when monitoring its progress. The name can contain alphanumeric and non-alphanumeric characters, but it cannot include non-English characters. On Linux®, the names can have a maximum of 200 characters. On Windows®, there is no length restriction. However, a maximum of 40 characters is recommended on all platforms.
3
In the Target Client list, select the machine on which you want to restore the data.
 
* 
TIP: You can also click Choose, and then locate and select the applicable client in the Choose the Target Client dialog box.
4
Use the Schedule, Source Options, and Advanced Options lists to configure any additional required options.
5
Click Save or Save & Submit, whichever is applicable.
You can monitor progress on the Job Status page and view the logs on the View Logs page. For more information, see the Dell NetVault Backup Administrator’s Guide.

Creating the VM from the restored VMDK Image

After the restore job has completed, you can create a VM from the restored VMDK file using the VMware Server console.
1
Log on to the VMware Server console.
2
Confirm that the VMDK file is located in the datastore path that was specified under ESX Server Options.
3
On the ESX Server, browse the datastore and navigate to the specified path.
The path should contain a file with the extension “.vmdk”.
4
In the upper-left corner of the VMware Server console, click the Create Virtual Machines icon.
5
When the Configuration dialog box appears, select Custom, and click Next.
6
In the Name field on the Name and Location dialog box, enter a descriptive name for your VM, and click Next.
7
When the Datastore dialog box appears, select a datastore in which to store the VM, and click Next.
8
When the Virtual Machine Version dialog box appears, select the version, and click Next.
9
When the Guest Operating System dialog box appears, select the guest OS, and click Next.
10
When the CPUs dialog box appears, select the number of virtual processors on the VM, and click Next.
11
When the Memory dialog box appears, configure the VM’s memory size, and click Next.
12
When the Network dialog box appears, configure the VM’s network connections, and click Next.
13
When the SCSI Controller dialog box appears, select the SCSI Controller type, and click Next.
 
* 
NOTE: NetVault Bare Metal Recovery only supports LSI Logic Parallel SCSI controllers for ESX 4.0 and LSI Logic SCSI for ESX 3.5.
14
When the Select a Disk dialog box appears, select Use an existing virtual disk, and click Next.
15
When the Browse Datastores dialog box appears, navigate to the datastore to locate the VMDK file, select it, and click OK.
16
When the Advanced Options dialog box appears, select any applicable options, and click Next.
17
When the Ready to Complete dialog box appears, review the summary of the VM you created, and then click Finish.
18
When the new VM appears in the left pane of the VMware console, right-click it, and select Open Console from the pop-up menu.
19
Power on the VM from the console.
The Windows® logo appears following a successful boot.
 
* 
NOTE: Additional notes for creating the from the restored VMDK Image:
•
Dell recommends installing VMware Tools before using the VM. For instructions, see the VMware documentation for instructions.
•
The “@” character cannot be used in the datastore path.
•
When restoring to an ESX Server, verify that there is sufficient free disk space available on the ESX VM. For details on calculating the required disk space, see http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003755
•
The block size determines the minimum amount of disk space that any file takes up on Virtual Machine File System (VMFS) datastores. Choose the block size carefully when creating VMFS datastores. The following block sizes are available:
•
1MB block size = 256GB maximum file size
•
2MB block size = 512GB maximum file size
•
4MB block size = 1024GB (1TB) maximum file size
•
8MB block size = 2048GB (2TB) maximum file size

Using Plug-in Offline Client to recover data to a standby NetVault Bare Metal Recovery Client

If a hardware failure occurs in a specific client machine, you can restore a previous NetVault Bare Metal Recovery backup to a different, preconfigured NetVault Bare Metal Recovery Client, or “standby.” To accomplish this restore, use the information provided in the following sections.
Before performing the recovery procedure, consider the following important points:
•
This procedure only works when restoring backups performed with the standard Plug-in Server.
•
The target NetVault Bare Metal Recovery Client, the “standby,” for this operation must be preconfigured using the procedure described in Adding a NetVault Bare Metal Recovery Client to the Plug-in Server.
•
When attempting this operation, there must be sufficient disk space on the standby machine; otherwise, the operation fails. For more information, see Verifying Disk Geometry and Device Size.
•
With this process, the new target machine must have a similar hardware configuration to that of the originally backed-up machine, regarding the NIC and SCSI cards used. If the hardware in use differs too much from the original, driver software conflicts may occur, resulting in a failed restore.
•
Values entered in the Restore Name field are case-sensitive. Ensure that the exact NetVault Backup name of the machine to be relocated to is entered in this field; otherwise, the restore fails.
•
Relocations of this type must be restored to the same partition they were backed up from. For example, if a NetVault Bare Metal Recovery backup was taken of a system’s “C:\” partition on a Windows®-based system, the restore must be performed to the relocation target’s “C:\” partition as well. You cannot restore to a different partition.
•
If you are restoring a 64-bit Linux Client that uses the Unified Extensible Firmware Interface (UEFI) with Plug-in Offline Client for Linux®, add the applicable entry in the UEFI/EFI boot manager the first time that you boot the standby client after the restore. To do so, during the boot process, press Esc, select Boot Maintenance Manager > Configure boot options > Add boot, add HD(1, GPT, <partitionGUID>, <partitionOffset>,<partitionSize>)/EFI/<LinuxDistribution>/grub(64).efi, and commit the changes.
To recover to a standby NetVault Bare Metal Recovery Client, perform the following steps.
1
In the Navigation pane of the NetVault Backup WebUI, click Create Restore Job.
2
On the Create Restore Job — Choose Saveset page, select Plug-in Server from the Plugin Type list.
3
To filter the items displayed in the saveset table further, use the Client, Date, and Job ID lists.
The table displays the saveset name (Job Title and Saveset ID), creation date and time, and size. By default, the list is sorted alphabetically by saveset name.
4
In the saveset table, locate the applicable client, and select the applicable item.
5
Click Next.
6
On the Create Selection Set page, select and open the disk to be relocated.
7
Select a disk item, and select Rename from the Actions list.
8
In the Rename/Relocate dialog box, enter the Disk Number of the disk to be restored, and click Ok.
For example, enter 0 for system disk 1, 1 for system disk 2, and so on. Evaluation of the SCSI disks is done before the IDE disks. So a system with two SCSI disks and two IDE disks would have the numbering 0 — SCSI 1, 1 — SCSI 2, 2 — IDE 1, 3 — IDE 2.
9
Repeat Step 7 and Step 8 for each disk you want to relocate.
10
On the Create Selection Set page, click Edit Plugin Options, and ensure that Physical Machine is the selected Restore Type.
11
In the Restore Name box, enter the name of the preconfigured NetVault Bare Metal Recovery Client that is to serve as the standby machine.
12
Continue with the restore, as explained previously in Using Plug-in Offline Client to restore data to a physical machine, and submit the job.
관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택