지금 지원 담당자와 채팅
지원 담당자와 채팅

Foglight for Active Directory 6.1.0 - Release Notes

System Requirements

System Requirements

Before installing Foglight for Active Directory, ensure your system meets the following minimum hardware and software requirements:

Note: Foglight for Active Directory only supports to monitor an Active Directory installed on an Azure VM. That is if a domain controller (DC) is an Azure VM instead of on-prem VM, then we can monitor it. However, AD cartridge does not support monitoring Azure AD itself.

Platform

Any supported Foglight, Foglight Evolve, or Foglight for Virtualization, Enterprise Edition platform. For more information, see the System Requirements and Platform Support Guide.

Memory

As specified in Foglight, Foglight Evolve, or Foglight for Virtualization, Enterprise Edition platform documentation.

Hard Disk Space

As specified in Foglight, Foglight Evolve, or Foglight for Virtualization, Enterprise Edition platform documentation.

Operating System

As specified in Foglight, Foglight Evolve, or Foglight for Virtualization, Enterprise Edition platform documentation.

Additional Software

Monitored Domain Controllers must be Windows Server® 2008 or newer.

Note: If you are using Windows Server 2008 R2, refer to the prerequisites described in the Prerequisites and Troubleshooting sections.

Small Business Systems (SBS) versions have not been tested.

 


Prerequisites

Prerequisites

The following prerequisite conditions must be in place in order to successfully initialize an Active Directory agent. Failure to meet these prerequisites may result in missing metrics in Foglight for Active Directory dashboards.

Note: The Remote Access Diagnostics utility, provided with this product, checks the connectivity between the Foglight Agent Manager (FglAM) and Active Directory and Exchange servers that are being monitored. It also tests for the prerequisite conditions that must be met in order to initialize an Active Directory agent. For more information on running the Remote Access Diagnostics utility, see the Remote Access Diagnostics User Guide.

Permissions

Note: Make sure to give minimum required privilege to your Active Directory® or Certificate Authority agent; otherwise this agent can not start data collection.

 

An Active Directory account with Administrator permissions  (domain or built-in administrators) must be specified in agent properties. This is the account used to run remote scripts. Foglight for Active Directory uses the userPrincipalName in the agent properties, so the sAMAccountName and the account CN must be identical. Also, they must not contain spaces, or LDAP authentication errors may occur.

 

To run remote scripts, a Certificate Authority agent requires an account with relevant privileges:

  • If the Certificate Authority server is a member server then agent account needs to be member of Domain Admins group.
  • If the Certificate Authority is a Domain Controller then the agent account needs to be member of either Domain Administrators group or Domain Admins group.

Agent must be able to reach the target host

Server objects do not appear until at least one piece of data has been collected and recorded. If communication fails completely, you will not see objects.

Configuration steps:

  1. Test Ping by IP. You must be able to ping the collection target from the FglAM hosting the agent instance. If ping by IP fails, there are routing issues.
  2. Test Ping by host name. A DNS server or Hosts file must be available to the FMS server in order to resolve names. If ping by host name fails, there are DNS or Hosts file issues.
  3. If a Hosts file is used it should contain an entry for each domain where hosts reside. For example:
    10.10.10.100 domain.local
    10.10.10.200 childdomain.domain.local
  4. In addition, individual servers must resolve to the unqualified and fully qualified name. For example:
    10.10.10.101 server server.domain.local
    The Hosts file is located at %windir%\system\drivers\etc

Remote scripting must be enabled

Since Foglight for Active Directory uses an agent-less design, remote execution of scripts must be enabled on all domain controllers. If communication fails completely, you will not see server objects. If partial data is collected, the server object will appear in the UI and the metrics with values will be displayed.  

Distributed COM (DCOM) must be enabled on all Domain Controllers (Active Directory Servers) or all Certificate Authority Servers.

To enable Distributed COM (DCOM):

  1. Click Start | Run.
  2. In the Run dialog, enter dcomcnfg and click OK.
  3. Expand Component Services and then Computers.
  4. Right-click the My Computer object and select Properties.
  5. On the Default Properties tab, check the Enable Distributed COM on this computer option.

Configuring Windows Remote Management (WinRM)

For details about this topic, refer to the "Configuring Windows Remote Management (WinRM)" section in the Foglight Agent Manager Guide.

Remote Registry Service must be running

The Remote Registry service must be running to allow agents remote access to the registry.

Windows Server 2008 R2 and Server 2012, 2016, and 2019 prerequisite

The account specified in the agent properties must have Full Control permissions on the registry keys.

Refer to Permissions on registry keys to configure DCOM command shell connection in Foglight Agent Manager Guide for detailed information.

Sample procedure for checking and registering a WMI class

The Extensible Storage Engine (ESE) is the database engine used by Active Directory. Foglight for Active Directory collects metrics and will fire alarms on ESE performance. It is recommended to verify that the Win32_PerfRawData_ESENT_Database WMI class is registered on each monitored domain controller by confirming the 'Database' Performance Object within Performance Monitor (Perfmon) exists. If this class is not registered, ESE queries will fail with 0x80041010 errors.

To check and register the ESENT WMI Class:

  1. Check for the Database performance object.
    1. Start | Run and enter: perfmon
    2. Click the plus (+) toolbar button.
    3. On the Add Counters dialog, click the Performance object drop-down menu and locate the Database entry.
  2. If the Database entry is present, the class is registered and there is likely another problem.
  3. If a Database entry is not present, register the following WMI class: Win32_PerfRawData_ESENT_Database WMI.
    1. Run the RegisterEsentWmiClass.vbs script included with Foglight for Active Directory.
    2. At a command line, enter: mofcomp %windir%\system32\wbem\scm.mof
    3. At a command line, enter: wmiadap /f

This procedure sets registry keys and refreshes the WMI database so it is aware of the change.

Kerberos configuration files

The Kerberos configuration file specifies the KDC from which tickets are obtained. Operating systems sometimes have their own Kerberos configuration files. If present, the Agent Manager uses them by default. They can be found in the following locations:

  •  Windows: %WINDIR%\krb5.ini which typically translates to C:\Windows\krb5.ini
  •  UNIX:
    /etc/krb5.conf
    Or:
    /etc/krb5/krb5.conf

If none of these files are found, the Agent Manager attempts to create its own kerberos configuration file, based on the detected settings. The detection can only be done on Windows, so on Unix, the file is not generated. On Unix platforms, you need to create your own Kerberos configuration files to establish WinRM connections using Negotiate authentication.

The krb5.ini or krb5.conf file should contain the realm info and hostname of the KDC for this realm. For example:

[libdefaults]
default_realm = <REALM_NAME_IN_CAPS>
[realms]
<REALM_NAME_IN_CAPS> = {
kdc = <fully_qualified_kdc_name>
}
[domain_realm]
.<domain_in_lower_case> = <REALM_NAME_IN_CAPS>

 


Troubleshooting

Troubleshooting

This section provides information about problems that you might encounter while monitoring your environment with Foglight for Active Directory, and describes the solutions available to troubleshoot these problems.

DCs on Windows Server 2012/2012 R2 Systems may experience high CPU usage

Symptom: In some circumstances, DCs on Windows Server 2012/2012 R2 systems may experience high CPU usage when monitored by the Active Directory agent. This issue only appears when using WinRM connections. Using WMI/DCOM connections prevents this issue.

Resolution:

If this issue is encountered, contact Support for assistance.

To troubleshoot this issue directly, use the Windows Task Manager to look for an increasing number of active conhost.exe or svchost.exe processes. If this problem is observed, the problem can be confirmed by adding the optional "Command Line" column to Task Manager (View > Select Columns > [ x ] Command Line). You should then see WinRM commands associated with the conhost.exe or svchost.exe instances.

If many of these processes are observed, increase the WinRM message envelope size from the default size of 500, as follows:

winrm set winrm/config @{MaxEnvelopeSizekb="1000"}

Microsoft® offers a workaround for this issue in the "Svchost.exe uses excessive CPU resources on a single-core Windows Server 2012 domain controller" article (KB 3118385).

Recommended best practices

The following procedure is a best practice that is recommended for optimal performance.

Disable automatic updates on Foglight Management Server

Do NOT allow the Microsoft® automatic update feature to force an update of the server hosting the Foglight Management Server. This automatic update feature does not allow enough time for the Foglight Management Server to shutdown gracefully, which may leave your agents in a broken state.

Symptom: Cartridge agents will appear to be deactivated on the Agent Status dashboard.

Resolution: Using the Agent Status dashboard, select the deactivated agent and select the Activate button. If you cannot activate the selected agent, delete and reinstall the agent.

Potential issues after upgrading the cartridge to version 6.1.0

Insufficient heap memory

Symptoms:

When upgrading to version 6.1.0, you encounter an error message similar to the following message (actual values may vary):

Error deploying package … Cause: The addition of 2097152kb to the negotiated JVM Max heap size would adjust to 2359296kb, which would exceed the total available physical memory of 1780736kb. Rejecting memory request.

 

Resolution:

This message indicates that the Agent Manager does not have sufficient heap memory to allocate to the requesting Foglight for Active Directory agent package. It is not possible to directly increase the amount of heap memory available to the Agent Manager, as it uses as much memory as the monitoring host can provide to it before issuing this message. The amount of memory available to be allocated to the Agent Manager must be increased, for example by adding more physical memory to the host. If the monitoring host is a virtual machine, more memory may be allocated to the VM.  

If this is not possible, consider moving some agents, or the Agent Manager and all agents, to another monitoring host which has more memory capacity.

Could not establish a connection to host xxx.xxxx.xxx

Symptoms:

  1. The following exception message may be found in the Active Directory agent log.
    2013-12-19 17:57:56.129 ECHO    <ActiveDirectory/5.6.6/ActiveDirectory/ad0-dc7.domain7.local-agent INFO> [Thread-33] com.quest.agent.ad.ActiveDirectoryAgent - Validate credentials for host: dc7.domain7.local
    2013-12-19 17:57:56.130 ECHO    <ActiveDirectory/5.6.6/ActiveDirectory/ad0-dc7.domain7.local-agent> ERROR [Thread-33] com.quest.agent.ad.ActiveDirectoryAgent - Could not establish a connection to host : dc7.domain7.local.
    2013-12-19 17:57:56.130 ECHO    <ActiveDirectory/5.6.6/ActiveDirectory/ad0-dc7.domain7.local-agent> ERROR [Thread-33] com.quest.agent.ad.ActiveDirectoryAgent - Data collection failure.
    com.quest.glue.api.services.NoCredentialsException: Could not establish a connection to host : dc7.domain7.local
    at com.quest.agent.ad.ActiveDirectoryAgent.buildConfigOnCredential(ActiveDirectoryAgent.java:1290)
    at com.quest.agent.ad.ActiveDirectoryAgent.access$000(ActiveDirectoryAgent.java:128)
    at com.quest.agent.ad.ActiveDirectoryAgent$1.run(ActiveDirectoryAgent.java:1262)
    at java.lang.Thread.run(Thread.java:662) 
  2. In Credentials > Manage Credentials, the following alarm may be found: "A Credential with purpose xxxx has been encrypted with a lockbox that has not been granted to this Agent Manager".

Resolution:

  1. Ensure that the lockbox has been released to the related Agent Manager (check credential clients in the Credentials > Manage Lockboxes dashboard).
  2. If the Agent Manager is in the credential client list, it must be restarted to fix this issue.

Query credential timeout

Symptom:

The following exception message may be found in the Active Directory agent log.

2013-12-19 18:00:02.317 ECHO    <ActiveDirectory/5.6.6/ActiveDirectory/ad0-dc7.domain7.local-agent> ERROR [Thread-35] com.quest.agent.ad.ActiveDirectoryAgent - Data collection failure.
java.util.concurrent.TimeoutException: Time out when query AD / EXC credentials.
at com.quest.agent.service.auth.impl.CredentialQueryResultImpl.get(CredentialQueryResultImpl.java:54)
at com.quest.agent.service.auth.impl.CredentialManagerImpl.queryCredential(CredentialManagerImpl.java:56)
at com.quest.agent.ad.ActiveDirectoryAgent.buildConfigOnCredential(ActiveDirectoryAgent.java:1285)
at com.quest.agent.ad.ActiveDirectoryAgent.access$000(ActiveDirectoryAgent.java:128)
at com.quest.agent.ad.ActiveDirectoryAgent$1.run(ActiveDirectoryAgent.java:1262)
at java.lang.Thread.run(Thread.java:662)

Resolution: Re-start the data collection.

 


Product licensing

Product licensing

Foglight includes a licensing capability that restricts access to those features that are defined in the license. Any Management Server installation requires a license that grants access to server-specific parts of the browser interface and the features associated with them. Foglight cartridges are also license-protected. While some cartridges are covered by the base Foglight license (such as Foglight Agent Manager cartridges and the Cartridge for Infrastructure), others may require an additional license. Foglight for Active Directory is covered by the Foglight Evolve Monitor, Operate, and Flex license.

 

To activate a trial or a purchased commercial license:

  1. On the navigation panel, under Dashboards, click Administration > Setup > Manage Licenses.
  2. Click Install.
  3. In the Install License dialog box, click Browse.
  4. In the file browser that appears, specify the location of the license file.
  5. In the Install License dialog box, click Install License.

 


관련 문서

The document was helpful.

평가 결과 선택

I easily found the information I needed.

평가 결과 선택