Submitting forms on the support site are temporary unavailable for schedule maintenance. If you need immediate assistance please contact technical support. We apologize for the inconvenience.
라이브 도움말 보기
등록 완료
로그인
가격 산정 요청
영업 담당자에게 문의
제품 번들을 선택했습니다. 귀하의 요청에 더 적합한 서비스를 제공해 드릴 수 있도록 개별 제품을 선택해 주십시오. *
지금은 채팅에 회신할 수 있는 기술 지원 엔지니어가 없습니다. 즉각적인 서비스를 받으려면 당사의 서비스 요청 양식을 사용하여 요청을 제출하십시오.
다음 문서의 설명에 따라 문제를 해결할 수 있습니다.
The following table provides a list of the HADR Activity metrics that are collected, and a description for each.
DB_NAME
The name of the monitored database.
DBPARTITIONNUM
The database partition from which the data was retrieved for this row.
HADR_ROLE
The current HADR role of the database. The data type of this element is integer. The value for this element is one of the following constants:
SQLM_HADR_ROLE_STANDARD (value = 0): The database is not a HADR database.
SQLM_HADR_ROLE_PRIMARY (value = 1): The database is the primary HADR database.
SQLM_HADR_ROLE_STANDBY (value = 2): The database is the standby HADR database.
HADR_STATE
The current HADR state of the database. The data type of this element is integer. This element should be ignored if the HADR role of the database is standard. If the database has a HADR role of primary or standby, the value for this element is one of the following constants:
SQLM_HADR_STATE_DISCONNECTED (value = 0): The database is not connected to its partner database.
SQLM_HADR_STATE_LOC_CATCHUP (value = 1): The database is doing local catch-up.
SQLM_HADR_STATE_REM_CATCH_PEND (value = 2): The database is waiting to connect to its partner to do remote catch-up.
SQLM_HADR_STATE_REM_CATCHUP (value = 3): The database is doing remote catch-up.
SQLM_HADR_STATE_PEER (value = 4): The primary and standby databases are connected and are in peer state.
HADR_SYNCMODE
The current HADR synchronization mode of the database. The data type of this element is integer. This element should be ignored if the HADR role of the database is standard. If the database has a HADR role of primary or standby, the value for this element is one of the following constants:
SQLM_HADR_SYNCMODE_SYNC: Sync mode
SQLM_HADR_SYNCMODE_NEARSYNC: Nearsync mode
SQLM_HADR_SYNCMODE_ASYNC: Async mode
HADR_CONNECT_STATUS
This element should be ignored if the HADR role of the database is standard. If the database has a HADR role of primary or standby, the value for this element is one of the following constants:
SQLM_HADR_CONN_CONNECTED (value = 0): The database is connected to its partner node.
SQLM_HADR_CONN_DISCONNECTED (value = 1): The database is not connected to its partner node.
SQLM_HADR_CONN_CONGESTED (value = 2 ): The database is connected to its partner node, but the connection is congested. A connection is congested when the TCP/IP socket connection between the primary and standby pair is still alive, but one end cannot send to the other end. For example, the receiving end is not receiving from the socket connection, resulting in a full TCP/IP send space. The reasons for network connection congestion include the following:
HADR_CONNECT_TIME
Shows one of the following:
HADR connection time
HADR congestion time
HADR disconnection time
This element should be ignored if the HADR role of the database is standard. If the database HADR role is primary or standby, the meaning of this element depends on the value of the HADR_CONNECT_STATUS element:
If the value of the HADR_CONNECT_STATUS element is SQLM_HADR_CONN_CONNECTED, then this element shows connection time.
If the value of the HADR_CONNECT_STATUS element is SQLM_HADR_CONN_CONGESTED, then this element shows the time when congestion began.
If the value of the HADR_CONNECT_STATUS element is SQLM_HADR_CONN_DISCONNECTED, then this element shows disconnection time.
If there has been no connection since the HADR engine dispatchable unit (EDU) started, connection status is reported as Disconnected and HADR EDU startup time is used for the disconnection time. Since HADR connect and disconnect events are relatively infrequent, the time is collected and reported even if the DFT_MON_TIMESTAMP switch is off.
HADR_HEARTBEAT
The number of missed heartbeats on the HADR connection. If the HADR role of the database is primary or standby, this element indicates the health of the HADR connection. A heartbeat is a message sent from the other HADR database at regular intervals. If the value for this element is zero, no heartbeats have been missed and the connection is healthy. The higher the value, the worse the condition of the connection.
A HADR database expects at least one heartbeat message from the other database in each quarter of the time interval defined in the HADR_TIMEOUT database configuration parameter or in 30 seconds, whichever is shorter. For example, if the HADR_TIMEOUT value is 80 (seconds), then the HADR database expects at least one heartbeat message from the other database every 20 seconds.
Use this element to determine the health of the HADR connection. Use the HADR_ROLE monitor element to determine the HADR role of the database.
HADR_LOCAL_HOST
The local HADR host name. The value is displayed as a host name string or an IP address string such as 1.2.3.4. This element should be ignored if the HADR role of the database is standard.
HADR_LOCAL_SERVICE
The local HADR TCP service. This value is displayed as a service name string or a port number string. This element should be ignored if the HADR role of the database is standard.
HADR_REMOTE_HOST
The remote HADR host name. The value is displayed as a host name string or an IP address string such as 1.2.3.4. This element should be ignored if the HADR role of the database is standard.
HADR_REMOTE_SERVICE
The remote HADR TCP service. This value is displayed as a service name string or a port number string. This element should be ignored if the HADR role of the database is standard.
HADR_REMOTE_INSTANCE
The remote HADR instance name. This element should be ignored if the HADR role of the database is standard.
HADR_TIMEOUT
The number of seconds it takes for a HADR database server to consider a communication attempt to have failed. For an attempt to fail, a HADR database server must not receive a reply message from its partner within the number of seconds specified in this element. This element should be ignored if the HADR role of the database is standard.
HADR_PRIMARY_LOG_FILE
The name of the current log file on the primary HADR database. This element should be ignored if the HADR role of the database is standard.
HADR_PRIMARY_LOG_PAGE
The page number in the current log file indicating the current log position on the primary HADR database. The page number is relative to the log file. For example, page zero is the start of the file. This element should be ignored if the HADR role of the database is standard.
HADR_PRIMARY_LOG_LSN
The current log position of the primary HADR database. Log sequence number (LSN) is a byte offset in the log stream of the database. This element should be ignored if the HADR role of the database is standard.
HADR_STANDBY_LOG_FILE
The name of the current log file on the standby HADR database. This element should be ignored if the HADR role of the database is standard.
HADR_STANDBY_LOG_PAGE
The page number in the current log file indicating the current log position on the standby HADR database. The page number is relative to the log file. For example, page zero is the start of the file. This element should be ignored if the HADR role of the database is standard.
HADR_STANDBY_LOG_LSN
The current log position of the standby HADR database. Log sequence number (LSN) is a byte offset in the log stream of the database. This element should be ignored if the HADR role of the database is standard.
HADR_LOG_GAP_KB
The size (in KB) of the gap between the primary LSN and the standby LSN.
When a log file is truncated, the LSN in the next log file starts as if log file truncation took place, as a result of that creating an LSN hole that contains no log data. Such holes can lead to a situation where the log gap does not reflect the actual log difference between the primary and standby LSN.
HADR_LOG_GAP_KB_RATE
The running log gap rate (in KB/s) between the primary and the standby database.
The following table provides a list of the Host Properties metrics that are collected, and a description for each.
The partition number.
The physical name of the host.
The machine model.
Example: Sun Fire V240
The operating system.
Example for OS and OS version collections: 64-bit sparcv9 sun4u
The version of the operating system.
The amount of machine RAM configured for DB2 servers.
The total number of CPU units available for DB2 servers.
The number of IO devices configured on the host.
The number of network interfaces installed on the host.
The following table provides a list of the OS General metrics that are collected, and a description for each.
DATABASE
DISK_UTILIZATION
The percentage of time the busiest device spent serving system-wide I/O requests. This metric serves as a measure for the system I/O load.
FREE_RAM
The amount of RAM that is free and not used by any of the running processes on the DB2 host.
PARTITION#
RESIDENT_SET_SIZE
The host OS resident memory set size.
SYSTEM_CPU_UTILIZATION
The total CPU consumption by all system processes (including DB2 processes) on the host.
SYSTEM_KERNAL_CPU_UTILIZATION
The percentage of CPU time consumed by the operating system's kernel mode activities (processes).
SYSTEM_USER_CPU_UTILIZATION
The percentage of CPU time consumed by the operating system's user mode activities (processes).
USED_RAM
The total amount of memory (both resident and swapped RAM) consumed by all the operating system’s processes, including DB2 (measured in MB).
USED_RAM_PCT
The percentage of RAM that is used by all the operating system’s processes.
VIRTUAL_SET_SIZE
The host OS virtual memory set size.
The following table provides a list of the Instance Activity metrics that are collected, and a description for each.
AGENTS_CREATED_EMPTY_POOL
The number of agents created due to an empty agent pool, including the number of agents started at DB2 start-up (num_initagents).
AGENTS_REGISTERED
The number of agents registered in the currently monitored database manager instance (coordinator agents and subagents).
AGENTS_STOLEN
Represents the number of idle agents associated with an application that get reassigned to work on a different application.
CON_LOCAL_DBASES
The number of local databases that have applications connected.
DB2_STATUS
This interface returns a text identifier, which is based on the definitions in the sqlmon.h file and can have one of the following values:
ACTIVE
QUIESCE_PEND
QUIESCED
DB2START_TIME
The date and time that the database manager was started using the db2start command.
INSTANCE_NAME
The name of the monitored instance.
LAST_RESET
The date and time that the monitor counters were reset.
LOCAL_CONNECTIONS
The number of local applications that are currently connected to a database within the database manager instance being monitored.
LOCAL_CONN_EXEC
The number of local applications that are currently connected to a database within the database manager instance being monitored and are currently processing a unit of work.
NUM_NODES_IN_DB2_INSTANCE
The number of partitions on the instance.
PERCENT_OF_AGENTS_IN_USE
Of the maximum agents, the percentage of those agents in use.
PIPED_SORTS_ACCEPTED
The number of piped sorts that have been accepted.
Each active sort on the system allocates memory, which may result in sorting taking up too much of the available system memory.
When the number of accepted piped sorts is low compared to the number requested, you can improve sort performance by adjusting one or both of the following configuration parameters:
sortheap, sheapthres
PIPED_SORTS_REQUESTED
The number of piped sorts that have been requested.
POST_THRESHOLD_SORTS
The number of sorts that have requested heaps after the sort heap threshold has been exceeded.
If this element's value is high, you can increase the sort heap threshold (sheapthres) or adjust applications to use fewer or smaller sorts through SQL query changes.
PRODUCT_NAME
The details of the version of the DB2 instance that is running.
REMOTE_CONN_EXEC
The number of remote applications that are currently connected to a database within the database manager instance being monitored and are currently processing a unit of work.
REMOTE_CONNECTIONS
The current number of connections initiated from remote clients to the instance of the database manager that is being monitored.
SERVICE_LEVEL
The current corrective service level of the DB2 instance.
SORT_HEAP_ALLOCATED
The total number of allocated pages of sort heap space for all sorts.
계열사 지원 사이트에서 Quest *제품*에 대한 온라인 지원 도움말을 볼 수 있습니다. 올바른 *제품* 지원 콘텐츠 및 지원에 연결하려면 계속을 클릭하십시오.
The document was helpful.
평가 결과 선택
I easily found the information I needed.
© ALL RIGHTS RESERVED. 이용 약관 개인정보 보호정책 Cookie Preference Center
Quest Software 포털은 더 이상 IE 8, 9, 10을 지원하지 않습니다. 브라우저를 최신 버전의 Internet Explorer나 Chrome으로 업그레이드하는 것이 좋습니다.
IE 11로 업그레이드 여기를 클릭
Chrome으로 업그레이드 여기를 클릭
IE 8, 9 또는 10을 계속 사용할 경우 당사가 제공하는 뛰어난 셀프서비스 기능 모두를 최대한으로 활용하실 수 없습니다.
