10.2.2 New Features:
- AWS S3 Cloud Storage
- Recovery Manager for Active Directory Disaster Recovery Edition provides the ability to set up and use dedicated cloud storage locations for backups. Cloud Storage in combination with Tier 1 storage options ensure that your critical backups are always available in case of disaster. Recovery Manager for Active Directory Disaster Recovery Edition 10.2.2 introduces support for Amazon Web Services (AWS) S3 storage. In Recovery Manager for Active Directory Disaster Recovery Edition, RMAD PowerShell® cmdlets are available to add, edit and remove the AWS S3 Cloud Storage.
- Pause Recovery for Remediation
- A recovery in Directory Services Restore Mode (DSRM) can now be paused during the recovery for remediation. A new Malware Remediation tab has been introduced in the Forest Recovery console and has options to allow the user to make choices for scanning of malware or server maintenance during recovery The feature pauses the recovery during Directory Services Restore mode (DSRM) before the domain controller is restarted into normal mode allowing users to perform maintenance and run their own scans using third party tools and/or remediate if malware found. Pause recovery in DSRM to perform maintenance tasks can be enabled for specific domain controllers by selecting the option from the Malware Remediation tab from each domain controller in the project, or for all domain controllers in the entire domain/forest.
- Secure Storage Server Maintenance
- New support for Secure Storage server maintenance without unhardening via PowerShell® cmdlets.
- New On Demand Recovery Integration and Deprecation of Recovery Manager Portal
- Recovery Manager for Active Directory is introducing a new configuration UI for Integration with On Demand Recovery. Configuration is available with a new node, Hybrid Recovery, in the Recovery Manager console. To enable integration with On Demand Recovery, see the section on the Hybrid Connector in the RMAD User Guide for further information on settings. To support hybrid recovery and communication with On Demand Recovery a new service is available – Quest Recovery Manager Hybrid Connection. To install the new service, select the installer option Recovery Manager Hybrid Connection during installation of the Recovery Manager server and console. The Recovery Manager Portal, which enabled intranet users to use a Web browser to access the search and restore functionality is being deprecated. By providing configuration for On Demand Recovery Integration in the Recovery Manager console, installation and setup of the Recovery Manager Portal is no longer required to have Hybrid recovery support. There will not be a 10.2.2 version of the Recovery Manager Portal. Backward compatibility will be supported to continue to use earlier versions of the portal with an upgraded Recovery Manager server. The new Hybrid Connector can be configured via the RMAD PowerShell® API.
- Microsoft .NET 4.8 Requirement
- Recovery Manager for Active Directory needs Microsoft .NET 4.8 as a requirement for install. A check is performed during installation to confirm .NET 4.8 is install on the system. If not, a pop up dialog will appear requesting .NET 4.8 be installed on the system.
- Full support for Group Managed Service Accounts (gMSA)
- Full support for group Managed Service Accounts (gMSA) is now available for use in Recovery Manager for Active Directory, Recovery Manager for Active Directory Forest Edition and Recovery Manager for Active Directory Disaster Recovery Edition. This support includes but is not limited to, gMSA accounts to verify FE projects by schedule; use a gMSA account from one domain as the agent account for backing up DCs in a different domain; replication for console connection; gMSA for setting up replication; and gMSA to run PS custom scripts.
10.2.2 Enhancements:
- Improve message the error while creating remote DCOM object failed because "Access is denied" - 263396
- Cannot restore a user from a backup that requires credentials for accessing it - 267022
- Support GMSA account type to run PS custom script (Agent side only) - 317648
- Installation option for hybrid service in the main product setup - 346507
- New hybrid configuration Powershell API - 346513
- Installer check updated for .NET 4.8 - 349988
- Full support for GMSA accounts for RMAD DRE/FE/Standard - 352707
- Support for Windows 2022 with exceptions. See User Guide – 363862
10.2.1 Enhancements:
- Usability improvements to the Computer Collections Properties dialog including removal of Logging tab and introduction of new tab for Secondary Storage - 283362
- Creation of Management Shell Guide which lists all available PowerShell® cmdlets, with examples. Appendix removed from User Guide – 275100
10.2 Enhancements:
- Rename system state backups to Active Directory® backups - RMADFE-3009, 218405
- Hide the "Components" tab in computer collection settings - RMADFE-3042, 218415
- SCOM 2019 support - 219783
- Pass through Synchronize across time zones from windows task scheduler to RMAD - RMADFE-952, 220703
- Create Logs Daily to be on by default - 223980
- Display operating system version for all backups – 228741
10.2.2 Resolved Issues:
- RMAD replication doesn't work with Group Managed Service Account (gMSA) configured for console connection - RMADFE-2594, 242195
- gMSA cannot be used when setting up replication - RMADFE-2519, 242560
- Use a gMSA account from one domain as the agent account for backing up DCs in a different domain does not work - 265197
- RMAD not finding backups requested by ODR in different timezones - 316404
- BackupAgent does not respect global logging setting "Create a new set of log files: Never" - 322747
- Update DisksInfoProvider to be more current and ignore unnecessary drive types - 323924
- ERDiskAD.mdb does not get imported, gets overwritten by blank rmad.db3 when installing the new version - 352421
- A v10.2.1 pre-installed backup agent fails when backup is requested by a v10.1.1 console - 353765
- Updating backup agent fails if custom port is configured - 354851
- Global settings dialog has a slightly broken layout on several tabs - 358457
- RMAD Console - Replication: Backup information is not being cleaned out of the console when it no longer exists on source - 359553
- RMAD Console: Diagnostic Logging drop-down reverts to Global Settings when enabled within Advanced settings of Computer Collection - 363140
- Installer log messages are truncated – 364258
10.2.1 Hotfix 2 Resolved Issues:
- RMAD Console Replication error (XML error) during replication when backup runs on master console - 351462
- Cleanup of metadata during restore of an unprotection object failed from accidental deletion - 354567
- RMAD Console: Diagnostic Logging drop-down reverts to Global Settings when enabled within Advanced settings of Computer Collection - 363140
- RMAD build 10.2.1.36279 will not install and triggers MS Defender notification – 366313
10.2.1 Hotfix 1 Resolved Issues:
- Error with diagram explaining Change Auditor integration - 323348
- GMSA workflow in the documentation is reportedly missing steps - 325726
- Cannot retry a snapshot if certain errors occurred while creating a backup – 330733
10.2.1 Resolved Issues:
- Allow to unselect Console storage immediately as alternative has been configured - 220573
- Large number of scheduled tasks can cause Console, Replication and PowerShell cmdlets to be extremely slow - RMADFE-1837, 242166
- Remove a BOM prefix from the script file - 257798
- Unpacking the backup and the retention policy may fail if the DC cannot be accessed via LDAP from the RMAD console machine - 279431
- RPC calls to Backup Agent are not retried on RPC_S_SERVER_TOO_BUSY error - 314812
- Misleading 'Unable to map the network share IPC$ on the computer' error message on attempt to map UNC share - 316902
- Installation fails with an invalid error message when using a local windows credential to connect to the remote SQL server - 317818
- Online Restore Wizard cannot undelete an object using a non-administrative account. Restoring an object in Online Restore Wizard using a non-administrative account may result in the following error for NT-Security-Descriptor attribute: "Cannot retrieve attribute value(s) from Active Directory. Possible reason: Insufficient access rights." To ignore this error, the NT-Security-Descriptor attribute can be excluded from the list of restored attributes – 293311
10.2 Hotfix 1 Resolved Issues:
- Installation of Quest personal certificates to the local certificate store failed. Receive error message to install Quest certificates later. This should not be required - 274643
- Computer Collection scheduled tasks removed after upgrade to 10.2 if gMSA used as the scheduled task account - 280854
- rmad.db3 file gets overwritten during an uninstall -> install of version 10.2 - 283069
- Cannot retain the uncheck "Global Catalog Servers" option in the Advanced tab of the Computer Collection properties window - 230397
- It will display 'Network access is denied' error in Win2016/2019 if specify account to restore GPO with "domain\username" format - 233623
- Cannot see some advanced objects in the object picker in Online Restore Wizard – 275027
10.2 Resolved Issues:
- Security Vulnerability - Sensitive comments embedded within client-side code sent to an end user machine - RMADFE-3244, 218142
- Security Vulnerability - Runtime hardening (SEP, ASLR and other) - RMADFE-3248, 218146
- Full replication fails when a DC is selected for the option 'Unpack each backup upon its creation' in the master console - RMADFE-1858, 218500
- Storage agent settings are not applied on install - 219910
- No progress/wait indication after clicking 'OK' on the 'Add Console…' dialog - 224321
- Backup fails if the Domain Controllers OU has a AzureADKerberos computer object in it as part of Azure AD FIDO deployment - 227903
- Improve documentation with information on number of scheduled computer collections for optimal performance - 232614
- Access Violation in the ProcessRequest function and crashes service - 232682
- Remove mutual exclusion mechanism between replication process and restore process - RMADFE-1575, 237972
- Display correct backup info and support restore for Collections with containers (not DCs) - 240580
- Retriable VSS error causes undefined behavior in Backup Agent on retry - 241825
- Modify the configuration to remove collision problems with SHA1, moved to SHA256 - 253913
- Retention policy ignores collection and consider backups of all collections - 259645