1 |
2 |
On the Explore Disk Storage page, you can view the repository table. |
• |
Repository Name: The name of the device or storage container. |
• |
Type: Device type (for example, NetVault SmartDisk, Quest DR Series system, or Data Domain system). |
• |
Record Count: Number of data records stored in the device. |
• |
Saveset Count: Number of savesets stored in the device. |
• |
Space Free: Amount of space available. |
• |
Space Used: Amount of space used. |
• |
Deduplication ratio: The ratio of size of data before deduplication to the size of data after deduplication. |
5 |
6 |
On the Explore Disk Storage Repository page, you can view the following information: |
• |
Repository summary: This area shows the following information: |
• |
Repository name: The name of the device or storage container. |
• |
Data stored: Total data stored in the device (total data size without deduplication). |
• |
Physical space used: Total physical space used by backups stored in the device (total data size with deduplication). |
• |
Space available: Free space available in device. |
• |
Deduplication ratio: The ratio of size of data before deduplication to the size of data after deduplication. |
• |
Storage data type: Pie chart showing the percentage of storage used by various plug-ins. |
• |
Saveset table: The Saveset table lists all backups stored in the repository. It shows the saveset creation date, saveset name, saveset size, job ID number, instance number, and phase number. |
• |
To view savesets created for a particular client, click the Client list, and select the client in the list. |
1 |
2 |
On the Explore Tape Storage page, you can view the media table. |
• |
Label: Media label. |
• |
Group: Media group label. |
• |
Barcode: Media barcode. |
• |
Library: Name of the library. |
• |
Record Count: Number of data records stored in the tape. |
• |
Saveset Count: Number of savesets stored in the tape. |
• |
Space Free: Amount of free space available. |
• |
Space Used: Amount of space used. |
• |
Online: Tape is online () or offline (). |
6 |
On the Explore Tape Media Item page, you can view the following information: |
• |
Tape summary: This area shows the following information: |
• |
Barcode: Media barcode. |
• |
Label: Media label. |
• |
Group: Media group label. |
• |
Library: Name of the library where the tape resides. |
• |
Offsite Location: Off-site location, if specified. |
• |
Media Type: Disk file (virtual tape) or physical tape. |
• |
Data Stored: Total data stored in the tape. |
• |
Space Available: Amount of free space available. |
• |
Reuse Policy: Tape can be reused or not. |
• |
Date Last Written: Date on which the last write operation was performed. |
• |
Date Last Read: Date on which the read operation was performed. |
• |
Times Reused: The number of times the tape has been reused. |
• |
Read Errors: Number of read errors. |
• |
Write Errors: Number of write errors. |
• |
Usable: Tape is usable or unusable. |
• |
Read-Only: Tape is marked read-only or not. |
• |
Media Online: Tape is online or offline. |
• |
Media Usage: Pie chart showing the amount of storage used by various savesets. |
• |
Saveset table: The Saveset table lists all backups stored in the repository. It shows the saveset creation date, saveset name, saveset size, job ID number, instance number, and phase number. |
This section includes the following topics:
By default, NetVault assigns a system-generated string to a blank media item. You can modify the configuration settings to use media barcodes as the default labels. For more information, see Configuring general settings for Media Manager.
1 |
In the Navigation pane, click Manage Devices. |
3 |
Select the type of media that you want to label. The available options are:
| |||||||||
Select the type of media label. The available options are:
– Label: Specify the string that you want to use as the media label.
– Seed: To identify individual media items, a sequential number is added to the user-defined string. The option defines the initial value for the sequence. This value is increased by one for each item. The default value for this option is one. | |||||||||
To label all media items in the selected library, select this check box. | |||||||||
To label specific media items, select the individual media items in the list. |
4 |
Click OK to save the settings. |
1 |
In the Navigation pane, click Manage Devices. |
3 |
Click Bulk Label. |
4 |
In the Bulk Label Media window, configure the following parameters: |
• |
Type of Media to Label: Select the type of media to be labeled: |
• |
Blank: Select this check box to label any blank, non-labeled piece of media in a device that is currently accessible to the NetVault Server. |
• |
Other: Select this check box to bulk label media types that do not belong to any category listed here. |
• |
NetVault 5: Select this check box to label any piece of media that was used to back up data with NetVault 5.x. |
• |
Reusable: Select this check box to label a piece of media that is marked as reusable. |
• |
Type of Label: Select the type of media label: |
• |
Barcode: To use media barcodes as the media labels, select this option. |
• |
Machine and Date: To generate a string using the NetVault Server Name, Current Date, and a Seed Number, select this option. |
• |
User: To assign a user-defined label, select User, and enter the following details: |
• |
Label: Enter the string to be used as media label. NetVault does not support a “%” character in the string. A media label can contain alphanumeric and non-alphanumeric characters, but it cannot include Non-English characters. |
• |
Seed: For the identification of individual media items, NetVault adds a sequential number to the user-defined string. The Seed parameter provides the initial value for the sequence. This value is incremented by one for each media item. The default value for Seed is one. |
• |
Group Label: To add the media items to a group, select the group label in the list. If you want to create a new group label, enter the string. The group label can contain alphanumeric and non-alphanumeric characters, but it cannot include Non-English characters. |
• |
Select Media Items: Select the applicable method: |
• |
Select Individual Media Items: In the media list, select the individual media items for labeling. To select consecutive items, hold down the Shift key while clicking with the mouse button; to select nonconsecutive items, hold down the Ctrl key while clicking with the mouse button. |
• |
Select All Media Items: To label all media items in the list, select the All Media in List check box. |
• |
Enter ‘LABEL’ to Confirm Request: To confirm bulk labeling, enter LABEL in the box. This string is case insensitive. |
5 |
Click OK. |
1 |
In the Navigation pane, click Manage Devices, and in the list of devices, click the icon to open the library that contains the tape. |
3 |
4 |
Click OK to save the settings and close the dialog box. |
1 |
In the Navigation pane, click Manage Devices, and in the list of devices, open the library that contains the tape. |
3 |
In the Media Label dialog box, configure the following options. |
Select MTF on Windows and CPIO on Linux/UNIX. |
4 |
5 |
Click OK to save the settings and close the dialog box. |
© ALL RIGHTS RESERVED. 利用規約 プライバシー Cookie Preference Center