vRanger 7.8.5 - User Guide


Add-PhysicalMachine	Run-ReplicationFailover
Get-GlobalTransportFailover	Run-ResumeReplicationFailover
Get-MonitorLog	Run-TestReplicationFailover
Get-TransportFailover	Update-GlobalTransportFailover
New-ReplicationFlag	Update-ReplicationJobTemplate

Cmdlet help

To get help on any of the vAPI cmdlets, use the Get-Help command. At the prompt, enter Get-Help command, where command is any of the preceding vAPI cmdlets.

vAPI Cmdlet details


	IMPORTANT: For the most up-to-date help contents, see the cmdlet help. To get help on any of the vAPI cmdlets, use the Get-Help command. At the prompt, enter: Get-Help <command> ‑full where <command> is any of the following vAPI cmdlets.

Add-BackupGroupEntity

Description

Adds a new backup group to vRanger. New-BackupGroupMember cmdlet is used to add members to a backup group created using this cmdlet or the UI.

Syntax

Add-BackupGroupEntity [‑BackupGroupName] <String> [<CommonParameters>]

Parameters

•

BackupGroupName <String>: The BackupGroup Name.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"

•

Type [-Type]: This optional parameter specifies the type of backup group: VMware, HyperV, or Physical. If not specified, the default is VMware.

Examples

Add-BackupGroupEntity ‑BackupGroupName BG1

Related links

Remove-BackupGroupEntity

New-BackupGroupMember

Remove-BackupGroupMember

Get-BackupGroupEntity

Add-BackupJobTemplate

Description

Adds a backup job. You also have the option of running the job immediately after the template is created.

Syntax

Add-BackupJobTemplate [‑JobName] <String> [[‑JobDescription] <String>] [‑JobEntity] <Entity> [[‑ExcludedVMList] <String>] [[‑IncludedDiskList] <String>] [‑TargetRepository] <Repository> [[‑JobSchedule] <Schedule>] [‑Flags] <NoFlags | BackupPoweredOnOnly | CheckDestinationFreeSpace | UseCompression | UpdateNotes | EnableGuestQuiescing | EnableABM | UseFiber | PerformNetworkBackupOnFailure | UseCataloging | AllFlags> [‑NumberOfSavePoints] <Int> [‑SpaceSavingTechnologyTypeFlag] <None | Incremental | Differential> [[‑SpaceSavingCountThreshold] <Int>] [[‑SpaceSavingPercentSizeThreshold] <Int>] [[‑NotificationList] <String>] [[‑RunJobNow] <Boolean>] [[‑TransportConfiguration] <TransportConfiguration>] [[‑FullBackupDays] <List`1>][<CommonParameters>]

Parameters

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

JobEntity <Entity>: Inventory entity on which the job is going to run on — VMware® ESXi™ host, VirtualCenter, and so on.

•

ExcludedVMList [<String>]: List of VM universally unique identifiers (UUIDs) to exclude from this job.

•

IncludedDiskList [<String>]: List of virtual disks to include in this job.

•

TargetRepository <Repository>: Repository where the backups are to be stored.

•

JobSchedule [<Schedule>]: Schedule on which the job runs.

•

Flags <BackupFlags>: Backup flags.

•

NumberOfSavePoints <Int>: Max number of savepoints to store before older ones are removed.

•

SpaceSavingTechnologyTypeFlag <SpaceSavingTechnologyType>: Spacesaving technology to use: differential, incremental or none.

•

SpaceSavingCountThreshold [<Int>]: The number to save before performing a full backup.

•

SpaceSavingPercentSizeThreshold [<Int>]: The size to allow as a % of the VM hard disk file before performing a differential backup.

•

NotificationList [<String>]: Email notification list for the job.

•

RunJobNow [<Boolean>]: Whether to run the job now.

•

TransportConfiguration [<TransportConfiguration>]: The transport configuration options to use for this job.

•

FullBackupDays [<List '1>]: The days to perform a full backup.

•

Examples

Add-BackupJobTemplate ‑JobName myjob ‑JobEntity $inv ‑TargetRepository $repo ‑JobSchedule $s ‑Flags NoFlags ‑NumberOfSavePoints 3 ‑SpaceSavingTechnologyTypeFlag None

This command adds a backup job template. Because the RunJobNow flag is not specified, the job does not run immediately.

Related links

Add-RestoreJobTemplate

Add-PhysicalMachine

Update-BackupJobTemplate

Adds a CIFS repository to vRanger. The repository can be later used to store backup files from backup jobs.

Syntax

Add-CifsRepository [‑Server] <String> [‑ShareName] <String> [[‑TargetDirectory] <String>] [‑DomainName] <String> [‑User] <String> [‑Password] <String> [‑Name] <String> [[‑Description] <String>] [[‑Overwrite] <Boolean>] [[‑EnableEncryption] <Boolean>] [[‑EncryptionPassword] <String>] [[‑ImportOption] <String>] [<CommonParameters>]

Parameters

•

Server <String>: The CIFS Server FQDN or IP.

•

ShareName <String>: Name of the file-system share the repository is on.

•

TargetDirectory [<String>]: The CIFS target directory.

•

DomainName <String>: Name of the domain.

•

User <String>: The CIFS user name.

•

Password <String>: The CIFS password.

•

Name <String>: A friendly name describing this CIFS server.

•

Description [<String>]: The description of the CIFS server.

•

Overwrite [<Boolean>]: Whether to overwrite the existing repository if one exists.

•

EnableEncryption [<Boolean>]: Whether to enable encryption.

•

EncryptionPassword [<String>]: The encryption Password.

•

ImportOption [<String>]: Whether to import the save points as read-write or read-only.

•

Examples

Add-CifsRepository ‑Server myserver.dev.corp ‑Sharename myshare ‑TargetDirectory myrepo ‑User myname ‑Password mypassword ‑Name myCifs Repo ‑Overwrite 1

This command adds a repository on server myserver.dev.corp pointing to a share named myshare using the credentials provided. Existing repositories at the location specified are overwritten.

Related links

Get-PhysicalMachineDiskMap

Add-DdbRepository

Add-HypervCluster

Add-NVSDRepository

Add-DdbReplicationRepository

Description

Adds an EMC® Data Domain® Boost (DD Boost™) replication repository to vRanger.

Syntax

Add-DdbReplicationRepository [‑Server] <String> [StorageUnit] <String> [‑User] <String> [‑Password] <String> [‑Name] <String> [[‑Description] <String>][‑RepositoryId] <String> [<CommonParameters>]

Parameters

•

Server <String>: The DD Boost server FQDN or IP.

•

StorageUnit <String>: The DD Boost storage unit.

•

User <String>: The user name to access the DD Boost server.

•

Password <String>: The password to access the DD Boost server.

•

Name <String>: A friendly name describing this DD Boost server.

•

Description [<String>]: The description of the DD Boost server.

•

RepositoryId <String>: Repository ID in GUID.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, ‑WarningAction, ‑WarningVariable, ‑OutBuffer, and ‑OutVariable. For more information, type: "get-help about_commonparameters"

Examples

Add-DdbReplicationRepository ‑Server myserver.dev.corp ‑StorageUnit mystorage ‑User myname ‑Password mypassword ‑Name myDDB Repo ‑RepositoryId 82E8A98A-1165-4ABE-966B-0E0AEF260620

This command configures a replication repository for repository identified by ID 82E8A98A-1165-4ABE-966B-0E0AEF260620 on server myserver.dev.corp pointing to a storage unit named mystorage using the credentials provided.

Adds an EMC Data Domain Boost (DDB) repository to vRanger. The repository can be later used to store backup files from backup jobs.

Syntax

Add-DdbRepository [‑Server] <String> [‑StorageUnit] <String> [‑User] <String> [‑Password] <String> [‑Name] <String> [[‑Description] <String>] [[‑Overwrite] <Boolean>] [[‑ImportOption] <String>] [<CommonParameters>]

Parameters

•

Server <String>: The EMC® Data Domain® Boost (DD Boost™) server FQDN or IP.

•

StorageUnit <String>: The DD Boost storage unit.

•

User <String>: The user name to access the DD Boost server.

•

Password <String>: The password to access the DD Boost server.

•

Name <String>: A friendly name describing this DD Boost server.

•

Description [<String>]: The description of the DD Boost server.

•

Overwrite [<Boolean>]: Whether to overwrite the existing repository if one exists.

•

ImportOption [<String>]: Whether to import the save points as read-write or read only.

•

Examples

Add-DdbRepository ‑Server myserver.dev.corp ‑StorageUnit mystorage ‑User myname ‑Password mypassword ‑Name myDDB Repo ‑Overwrite 1

This command adds a repository on server myserver.dev.corp pointing to a storage unit named mystorage using the credentials provided. Existing repositories at the location specified are overwritten.

Related links

Get-PhysicalMachineDiskMap

Adds a VMware® ESXi™ host to the inventory.

Syntax

Add-EsxHost [‑DNSorIP] <String> [‑Username] <String> [‑RootPassword] <String> [[‑UserPassword] <String>] [[‑Port] <Int>] [[‑AddUser] <Boolean>] [<CommonParameters>]

Parameters

•

DNSorIP <String>: The DNS or IP for the VMware® ESXi™ host.

•

Username <String>: The user name for the ESXi host.

•

RootPassword <String>: The root password for the ESXi host.

•

UserPassword [<String>]: The user password for the ESXi host.

•

Port [<Int>]: The SSH Port for the ESXi host.

•

AddUser [<Boolean>]: Add user if the user does not exist.

•

Examples

Add-EsxHost ‑DNSorIP 10.6.20.20 ‑Username root ‑RootPassword p@ssw0rd

This command adds an ESXi host to the inventory.

Adds a Hyper-V® Cluster to the inventory.

Syntax

Add-HypervCluster [‑DNSorIP] <String> [‑Username] <String> [‑Password] <String> [[‑Port] <Int32>] [[‑IsInstallAgent] <Boolean>] [<CommonParameters>]

Parameters

•

DNSorIP <String>: The DNS or IP for the Hyper-V cluster.

•

Username <String>: The user name to add the Hyper-V cluster.

•

Password <String>: The password to add the Hyper-V cluster.

•

Port [<Int32>]: The port to add the Hyper-V cluster.

•

IsInstallAgent [<Boolean>]: Install agent on cluster.

•

Examples

Add-HypervCluster ‑DNSorIP 10.6.20.20 ‑Username user1 ‑Password p@ssw0rd

This command adds a Hyper-V cluster to the inventory.

Related links

Add-BackupJobTemplate

Get-InventoryEntity

Add-HypervHost

Description

Adds a Hyper-V® host to the inventory.

Syntax

Add-HypervHost [‑DNSorIP] <String> [‑Username] <String> [‑Password] <String> [[‑Port] <Int32>] [[‑IsInstallAgent] <Boolean>] [<CommonParameters>]

Parameters

•

DNSorIP <String>: The DNS or IP for the Hyper-V host.

•

Username <String>: The user name to add the Hyper-V host.

•

Password <String>: The password to add the Hyper-V host.

•

Port [<Int32>]: The port to add the Hyper-V host.

•

IsInstallAgent [<Boolean>]: Install agent on host.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, ‑WarningAction, ‑WarningVariable, ‑OutBuffer, and OutVariable. For more information, type: "get-help about_commonparameters"

Examples

Add-HypervHost ‑DNSorIP 10.6.20.20 ‑Username user1 ‑Password p@ssw0rd

This command adds a Hyper-V host to the inventory.

Related links

Add-BackupJobTemplate

Get-InventoryEntity

Add-HypervRestoreJobTemplate

Description

Adds a Hyper-V® restore job template. Users also have the option of running the job immediately after the template is created.

Syntax

Add-HypervRestoreJobTemplate [‑JobName] <String> [[‑JobDescription] <String>] [‑SavePoint] <Savepoint> [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | ForceOverwrite | ForcePowerOn | UseFiber | PerformNetworkRestoreOnFailure | AddHypervVirtualMachineToCluster | AllFlags>] [[‑NotificationList] <List`1>] [[‑RunJobNow] <Boolean>] [[‑VMName] <String>] [[‑TargetHost] <String>] [[‑VmLocation] <String>] [[‑SkipDisks] <List`1>] [[‑DiskLocations] <List`1>] [[‑TargetNetworks] <List`1>] [[‑SkipAdapters] <List`1>] [<CommonParameters>]

Parameters

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

SavePoint <Savepoint>: Savepoint to restore.

•

JobSchedule [<Schedule>]: Schedule on which the job runs. If not set, the job runs on demand.

•

Flags [<RestoreFlags>]: Restore flags. If not set, the job has no flags.

•

NotificationList [<List`1>]: Separate multiple email addresses with commas.

•

RunJobNow [<Boolean>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

TargetHost [<String>]: Fully qualified domain name or IP address of the target host.

•

VmLocation [<String>]: Location on target host where the restored VM is located. If not set, the default for the host is used.

•

SkipDisks [<List`1>]: Sequence number — base 0 — of the disks to skip from the savepoint. Separate multiple numbers with commas.

•

DiskLocations [<List`1>]: Disk locations to use on the target host. Separate multiple values with commas. If only one is supplied, it is used for all disks on the VM. If not set, the default disk location for the host is used for all disks.

•

TargetNetworks [<List`1>]: Networks to use on the target host. Separate multiple values with commas. If only one network name is provided, it is used for all adapters on the VM. If not set, the original networks are used when restoring to the original VM.

•

SkipAdapters [<List`1>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas.

•

Examples

--------------------EXAMPLE 1--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$spList = get-repositorysavepoint $repo.id

$mysp = ($spList)[1]

Add-RestoreJobTemplate ‑Jobname vapirestore ‑Savepoint $mysp

This command creates a restore job template that restores to the original VM in the savepoint. The job runs on demand.

--------------------EXAMPLE 2--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$sp = get-repositorysavepoint $repo.id

$mysp = ($sp)[0]

$targethost = get-inventoryentities ‑type HypervHost | where{$_.name ‑eq 'dev 015.dev.eng.int'}

$targetDiskLocation = 'c:\hyper-virtual hard disks

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

Add-RestoreJobTemplate ‑jobname vapirestore_totaraget ‑savepoint $mysp ‑targethost $targethost.name ‑DiskLocations $targetDiskLocation ‑VmLocation 'c:\hyper-v\configuration' ‑targetnetworks $targetnw.name

This command creates a restore job template that restores to the specified target host. It also specifies disk location, vm location, and the network to use on the target host.

--------------------EXAMPLE 3--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$sp = get-repositorysavepoint $repo.id

$mysp = ($sp)[0]

$targethost = get-inventoryentities ‑type HypervHost | where{$_.name ‑eq 'dev015.dev.eng.int'}

$targetDiskLocation = 'c:\hyper-virtual hard disks

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

$skipdisks = '0'

Add-RestoreJobTemplate ‑jobname vapirestore_skipdisk ‑savepoint $mysp ‑targethost $targethost.name ‑DiskLocations $targetDiskLocation ‑VmLocation 'c:\hyper-v\configuration' ‑targetnetworks $targetnw.name ‑SkipDisks $skipdisk s

This command creates a restore job template that restores to the specified target host. The first disk (0) in the savepoint is skipped by the restore job.

Related links

Add-BackupJobTemplate

Add-RdaRepository

Update-RestoreJobTemplate

Adds a Network File Share repository to vRanger. The repository can be later used to store backup files from backup jobs.

Syntax

Add-NfsRepository [‑Server] <String> [‑ExportDirectory] <String> [‑TargetDirectory] <String> [‑Name] <String> [[‑Description] <String>] [[‑Overwrite][<Boolean>]] [[‑EnableEncryption] [<Boolean>]] [[‑EncryptionPassword] <String>] [[‑BlockSize] <Int>] [[‑EnableCompress] [<Boolean>]] [[‑ImportOption] [<String>]] [<CommonParameters>]

Parameters

•

Server <String>: The NFS Server FQDN or IP.

•

ExportDirectory <String>: The NFS Export Directory.

•

TargetDirectory <String>: The NFS Target Directory.

•

Name <String>: A friendly name describing this NFS server.

•

Description <String>: The Description describing the NFS server.

•

Overwrite [<Boolean>]: Whether to overwrite the existing repository if one exists.

•

EnableEncryption [<Boolean>]: Whether to enable encryption on backups on this repository.

•

EncryptionPassword <String>: The encryption Password.

•

ImportOption [<String>]: Whether to import the save points as read-write or read only. Possible options ReadOnly and ReadWrite.

•

Examples

--------------------EXAMPLE 1--------------------

Add-NfsRepository ‑Server myserver.dev.corp ‑ExportDirectory /vol/vol1 ‑TargetDirectory /test ‑Name MyNFSRepo ‑Overwrite 1

This command adds a repository on server myserver.dev.corp. Existing repositories at the location specified are overwritten.

--------------------EXAMPLE 2--------------------

Add-NfsRepository ‑Server myserver.dev.corp ‑ExportDirectory /vol/vol1 ‑TargetDirectory /test ‑Name MyNFSRepo ‑EnableEncryption 1 ‑EncryptionPassword myPassword ‑EnableCompress 1

This command adds a repository on server myserver.dev.corp. Enables encryption on backups of this repository. All backups to this repository are compressed.

Related links

Get-PhysicalMachineDiskMap

Adds a Quest NetVault SmartDisk repository to vRanger. The repository can be later used to store backup files from backup jobs.

Syntax

Add-NvsdRepository [‑Server] <String> [‑TargetDirectory] <String> [‑User] <String> [‑Password] <String> [‑Name] <String> [[‑Description] <String>] [[‑Overwrite] <Boolean>] [[‑ImportOption] <String>] [<CommonParameters>]

Parameters

•

Server <String>: The NetVault SmartDisk server FQDN or IP.

•

TargetDirectory [<String>]: The NetVault SmartDisk Target Directory.

•

User <String>: The NetVault SmartDisk user name.

•

Password <String>: The NetVault SmartDisk Password.

•

Name <String>: A friendly name describing this NetVault SmartDisk server.

•

Description <String>: The Description describing the NetVault SmartDisk server.

•

Overwrite [<Boolean>]: Whether to overwrite the existing repository if one exists.

•

ImportOption [<String>]: Whether to import the save points as read-write or read only. Possible options ReadOnly and ReadWrite.

•

Examples

Add-NvsdRepository -Server myserver.dev.corp -TargetDirectory myrepo -User myname -Password mypassword -Name myNVSD Repo -Overwrite 1

This command adds a repository on server myserver.dev.corp pointing to target directory named myrepo using the credentials provided. Existing repositories at the location specified will be overwritten.

Adds a physical machine to the inventory.

Syntax

Add-PhysicalMachine [‑DNSorIP] <String> [‑Username] <String> [‑Password] <String> [[‑Port] <Int>] [‑IsInstallAgent] <Boolean>] [[‑AgentLocation] <String>] [<CommonParameters>]

Parameters

•

DNSorIP <String>: The DNS or IP for the physical machine.

•

Username <String>: The user name to add the physical machine.

•

Password <String>: The password to add the physical machine.

•

Port [<Int>]: The port to add the physical machine.

•

IsInstallAgent [<Boolean>]: Install Agent on machine.

•

AgentLocation [<String>]: Agent installation location.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug,‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"

Examples

Add-PhysicalMachine ‑DNSorIP 10.6.20.20 ‑Username user1 ‑Password p@ssw0rd

This command adds a replication job template.

Related links

Add-BackupGroupEntity

Get-InventoryEntity

Add-RdaRepository

Description

Adds an RDA repository to vRanger. The repository can be later used to store backup files from backup jobs.

Syntax

Add-RdaRepository [‑Server] <String> [‑StorageUnit] <String> [‑User] <String> [‑Password] <String> [‑Name] <String> [[‑Description] <String>] [[‑Overwrite] <Boolean>] [[‑ImportOption] <String>] [<CommonParameters>]

Parameters

•

Server <String>: The DR Series server FQDN or IP.

•

StorageUnit [<String>]: The RDA logical storage unit.

•

User <String>: The user name to access the DR Series server.

•

Password <String>: The Password to access the DR Series server.

•

Name <String>: A friendly name describing this DR Series server.

•

Description <String>: The Description describing the NetVault SmartDisk server.

•

Overwrite [<Boolean>]: Whether to overwrite the existing repository if one exists.

•

ImportOption [<String>]: Whether to import the save points as read-write or read only. Possible options ReadOnly and ReadWrite.

•

Examples

Add-RdaRepository -Server myserver.dev.corp -StorageUnit mystorage -User myname -Password mypassword -Name myRDARepo -Overwrite 1

This command adds a repository on server myserver.dev.corp pointing to

storage unit named mystorage using the credentials provided. Existing

repositories at the location specified will be overwritten.

Add-ReplicationJobTemplate

Description

Adds a replication job template. You also have the option of running the job immediately after the template is created.

Syntax

Add-ReplicationJobTemplate [‑JobName] <String> [[‑JobDescription] <String>] [‑JobEntity] <VMEntity> [‑TargetHost] <HostEntity> [‑ReplicateName] <String> [‑Type] <String> [[‑TargetNetworks] <String>] [[‑PrimaryDatastore] <String>] [[‑TargetDatastores] <String>] [[‑JobSchedule] <Schedule>] [[‑TransportFailover] <String>] [[‑NotificationList] <String>] [‑Flags] <NoFlags | ReplicatePoweredOnOnly | CheckDestinationFreeSpace | UseCompression | UpdateNotes | EnableGuestQuiescing | EnableABM | AllFlags> [[‑RunJobNow] <Boolean>] [[‑IncludedDisk] <String>] [<CommonParameters>]

Parameters

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

JobEntity <VMEntity>: VM entity on which the job runs.

•

TargetHost <HostEntity>: Target Host entity to which the VM is replicated.

•

ReplicateName [<String>]: Name of replicated VM.

•

Type <String>: Replication type. Valid types are Differential and Hybrid.

•

TargetNetworks [<String>]: Networks to use on the target host. Separate multiple values with commas.

•

PrimaryDatastore <String>: Primary Datastore on target host where the replicated VM is to be located.

•

TargetDatastores [<String>]: Datastores to use on the target host. Separate multiple values with commas.

•

JobSchedule <Schedule>: The recurrence schedule on which the job runs.

•

TransportFailover [<String>]: Transport Failover order separated by commas to be attempted until the task is successful. Valid types are VA-HotAdd and VA-Network.

•

NotificationList [<String>]: Email notification list for the job. Separate multiple email addresses with commas.

•

Flags <ReplicationFlags>: Replication flags: NoFlags, ReplicatePoweredOnOnly, CheckDestinationFreeSpace, UseCompression, UpdateNotes, EnableGuestQuiescing, AllFlags. Separate multiple flags with pipes (|).

•

RunJobNow [<Boolean>]: Whether to run the job immediately after the job template is created.

•

IncludedDisk [<String>]: List of disks to include in this job. All VM disks are replicated if none is specified.

•

Examples

------------------EXAMPLE 1-----------------------

Add-ReplicationJobTemplate -JobName vRepJob1 -JobEntity $vm -TargetHost $targethost -ReplicateName TestRep -Type Differential -Flags $flags -targetDatastores MyDatastore1, MyDatastore2 -PrimaryDatastore MyDatastore -targetnetworks VM Network -includeddisk 0,1,2

This command adds a replication job template. Since the RunJobNow flag is not specified the job will not be run immediately. Since no transport failover is specified the default order of transport failovers will be used.

------------------EXAMPLE 2-----------------------

This command adds a replication job template.

Related links

Add-BackupJobTemplate

Add-RestoreJobTemplate

Update-ReplicationJobTemplate

Get-Job

Get-JobTemplate

Add-RestoreFromManifestJobTemplate

Description

Adds a restore job template from a manifest file. The manifest file can be a vRanger manifest file or a Legacy vRanger manifest file. You also have the option of running the job immediately after the template is created.

Syntax

Add-RestorefromManifestJobTemplate [‑JobName] <String> [[‑JobDescription] <String>] [‑Username] <String> [‑Password] <String> [‑ManifestPath] <String> [[‑EncryptionPassword] <String>] [[‑JobSchedule] <Schedule>] [[‑Flags] <No Flags | ForceOverwrite | ForcePowerOn | UseFiber | PerformNetworkRestoreOnFailure | AllFlags>] [[‑NotificationList] <String>] [[‑RunJobNow] <Boolean>][[‑VMName] <String>] [[‑TargetHost] <String>][[‑PrimaryDatastore] <String>] [[‑SkipDisks] <String>] [[‑TargetDatastores] <String>] [[‑TargetNetworks] <String>] [[‑SkipAdapters] <String>][[‑TransportConfiguration] <TransportConfiguration>] [<CommonParameters>]

Parameters

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

Username <String>: Username.

•

Password <String>: Password.

•

ManifestPath <String>: Path for the manifest file.

•

EncryptionPassword [<String>]: Encryption Password.

•

JobSchedule [<Schedule>]: Schedule on which the job runs. If not set, the job runs on demand.

•

Flags [<RestoreFlags>]: Restore flags. If not set, the job has no flags.

•

NotificationList [<String>]: Separate multiple email addresses with commas.

•

RunJobNow [<Boolean>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

TargetHost [<String>]: Fully qualified domain name or IP address of the target host.

•

PrimaryDatastore [<String>]: Datastore on target host where the restored VM is located. If not set, the original primary datastore is used when restoring to the original VM; otherwise the application randomly selects a datastore attached to the target host.

•

SkipDisks [<String>]: Sequence number — base 0 — of the disks to skip from the savepoint. Disks in savepoint are order by their SCSI controller number and disk number. Separate multiple numbers with commas.

•

TargetDatastores [<String>]: Datastores to use on the target host. Separate multiple values with commas. If only one is supplied, it is used for all disks on the VM. If not set, the original datastores are used when restoring to the original VM; otherwise the application randomly selects a datastore attached to the target host.

•

TargetNetworks [<String>]: Networks to use on the target host. Separate multiple values with commas. If only one network name is provided, it is used for all adapters on the VM. If not set, the original networks are used when restoring to the original VM; otherwise the application randomly selects a network attached to the target host.

•

SkipAdapters [<String>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas.

•

TransportConfiguration [<TransportConfiguration>]: The transport configuration options to use for this job.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug,‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"

Examples

--------------------EXAMPLE 1--------------------

$skipdisks = '0'

$skipnetworks = '0'

Add-RestorefromManifestJobTemplate ‑jobname vapirestore_manifest ‑username user1 ‑password Password1 ‑VmName Test ‑manifestpath \\pathtomanifestfile\XYZ-FreeDos_501ec05f-6088-5a14-8ae5-483bef2e054f\XYZ-FreeDos_20100302_085918_22c5f3ee-9a09-47ae-8a70-dae9233e5776\XYZ-FreeDos_20100302_085918_F.Manifest.metadata ‑targethost $targethost.name ‑targetDatastores $targetds.name ‑PrimaryDatastore $targetds.name ‑targetnetworks $targetnw.name ‑Flags $flags ‑SkipDisks $skipdisks ‑Skipadapters $skipnetworks ‑RunJobNow 1

This command creates a restore job template from a manifest file that restores to the specified target host. It also specifies the datastore and network to use on the target host. The first disk (0) in the savepoint and first adapter of the VM are skipped by the restore job.

--------------------EXAMPLE 2--------------------

Add-RestorefromManifestJobTemplate ‑jobname vapirestore_manifest ‑username user1 ‑password Password1 ‑VmName Test ‑manifestpath \\pathtomanifestfile\pintsize_20090724093457\pintsize.info ‑targethost $targethost.name ‑targetDatastores $targetds.name ‑PrimaryDatastore $targetds.name ‑targetnetworks $targetnw.name ‑Flags $flags ‑RunJobNow 1

This command creates a restore job template from a legacy manifest file that restores to the specified target host. It also specifies datastore and network to use on the target host.

--------------------EXAMPLE 3--------------------

Add-RestorefromManifestJobTemplate ‑jobname vapirestore_manifest ‑username user1 ‑password Password1 ‑encryptionpassword encryptPwd ‑VmName Test ‑manifestpath \\pathtomanifestfile\XYZ-FreeDos_501ec05f-6088-5a14-8ae5-483bef2e054f\XYZ-FreeDos_20100302_085918_22c5f3ee-9a09-47ae-8a70-dae9233e5776\XYZ-FreeDos_20100302_085918_F.Manifest.metadata ‑targethost $targethost.name ‑targetDatastores $targetds.name ‑PrimaryDatastore $targetds.name ‑targetnetworks $targetnw.name ‑Flags $flags ‑RunJobNow 1

This command creates a restore job template from an encrypted savepoint in the manifest file that restores to the specified target host. It also specifies datastore and network to use on the target host.

Examples (continued)

--------------------EXAMPLE 4--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$targethost = get-inventoryentities ‑type EsxHost | where{$_.name ‑eq 'dev015.dev.eng.int'} $targetds = get-datastore $targethost | where{$_.Name ‑eq 'Dynamo-ISCSI'}

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

$flags = New-RestoreFlag ‑ForceOverwrite 1

This command creates a restore job template from a manifest file that restores to the specified target host. It also specifies datastore and network to use on the target host.

Related links

Add-RestoreJobTemplate

Description

Adds a restore job template. You also have the option of running the job immediately after the template is created.

Syntax

Add-RestoreJobTemplate [‑JobName] <String> [[‑JobDescription] <String>] [‑SavePoint] <Savepoint> [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | ForceOverwrite | ForcePowerOn | UseFiber | PerformNetworkRestoreOnFailure | AddHypervVirtualMachineToCluster | AllFlags>] [[‑NotificationList] <List`1>] [[‑RunJobNow] <Boolean>] [[‑VMName] <String>] [[‑TargetHost] <String>] [[‑PrimaryDatastore] <String>] [[‑SkipDisks] <List`1>] [[‑TargetDatastores] <List`1>] [[‑TargetNetworks] <List`1>] [[‑SkipAdapters] <List`1>] [[‑TransportConfiguration] <TransportConfiguration>] [[‑PhysicalMachineIP] <String>] [[‑RestoreDiskMapping] <Hashtable>] [<CommonParameters>]

Parameters

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

SavePoint <Savepoint>: Savepoint to restore.

•

JobSchedule [<Schedule>]: Schedule on which the job should run. If not set, the job runs on demand.

•

Flags [<RestoreFlags>]: Restore flags. If not set, NoFlag. Restore flags: NoFlags, AllFlags, ForceOverwrite, ForcePowerOn. Separate multiple flags with pipes (|).

•

NotificationList [<String>]: Email notification list for the job. Separate multiple email addresses with commas.

•

RunJobNow [<Boolean>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

TargetHost [<String>]: Fully qualified domain name or IP address of the target host.

•

TargetDatastores [<String>]: Datastores to use on the target host. Separate multiple values with commas. If only one is supplied, it is used for all disks on the V M. If not set, the original datastores are used when restoring to the original VM; otherwise the application randomly selects a data store attached to the target host.

•

SkipAdapters [<String>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas.

•

TransportConfiguration: The transport configuration options to use for this job.

•

PhysicalMachineIP [<String>]: Physical machine IP address when booted to restore CD to perform the restore to. It must be booted to the restore CD.

•

RestoreDiskMapping [<Hashtable>]: Which disk in the repository is mapped to corresponding disks in the physical machine.

•

Examples

--------------------EXAMPLE 1--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$sp = get-repositorysavepoint $repo.id

$mysp = ($sp)[0]

$targethost = get-inventoryentities ‑type EsxHost | where{$_.name ‑eq 'dev015.dev.eng.int'}

$targetds = get-datastore $targethost | where{$_.Name ‑eq 'Dynamo-ISCSI'}

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

$skipdisks = '0'

Add-RestoreJobTemplate ‑jobname vapirestore_skipdisk ‑savepoint $mysp ‑targethost $targethost.name ‑targetDatastores $targetds.name ‑PrimaryDatastore $targetds.name ‑targetnetworks $targetnw.name ‑SkipDisks $skipdisks

This command creates a restore job template that restores to the specified target host. The first disk (0) in the savepoint is skipped by the restore job.

--------------------EXAMPLE 2--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$spList = get-repositorysavepoint $repo.id

$mysp = ($spList)[1]

Add-RestoreJobTemplate ‑Jobname vapirestore ‑Savepoint $mysp

This command creates a restore job template that restores to the original VM in the savepoint. The job runs on-demand.

--------------------EXAMPLE 3--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$sp = get-repositorysavepoint $repo.id

$mysp = ($sp)[0]

$targethost = get-inventoryentities ‑type EsxHost | where{$_.name ‑eq 'dev015.dev.eng.int'}

$targetds = get-datastore $targethost | where{$_.Name ‑eq 'Dynamo-ISCSI'}

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

Add-RestoreJobTemplate ‑jobname vapirestore_totaraget ‑savepoint $mysp ‑targethost $targethost.name ‑targetDatastores $targetds.name ‑PrimaryDatastore $targetds.name ‑targetnetworks $targetnw.name

This command creates a restore job template that restores to the specified target host. It also specifies datastore and network to use on the target host.

Examples (continued)

--------------------EXAMPLE 4--------------------

$repo = get-repository |where{$_.name ‑eq 'local'}

$sp = get-repositorysavepoint $repo.id

$mysp = ($sp)[0]

$targethost = get-inventoryentities ‑type EsxHost | where{$_.name ‑eq 'dev015.dev.eng.int'}

$targetds = get-datastore $targethost | where{$_.Name ‑eq 'Dynamo-ISCSI'}

$targetnw = get-network ‑host $targethost|where{$_.Name ‑eq 'Virtual Machine Network'}

$skipnetworks = '0'

This command creates a restore job template that restores to the specified target host. The first adapter of the VM in the savepoint is skipped by the restore job.

--------------------EXAMPLE 5--------------------

$myInv = Get-InventoryEntities ‑Type physicalMachine

$myPM = $myInv | where { $_.OriginatingConnection ‑eq '10.6.51.178'}n# the physical machine must be booted to the restore CD for this to work.

$myDiskMap = Get-PhysicalMachineDiskMap $myPM

$myRepo = Get-Repository ‑Type nfs

$sp = Get-RepositorySavePoint ‑Id $myRepo.Id

$mySP = ($sp)[0]

$myManifest = Get-SavepointManifest ‑Id $mySP.id

# Get the mapped physical disks that are the target of the manifest file map entry when the job is run.

# This cmdlet matches the disks by size.

$myRestoreDiskMap = Get-RestoreDiskMap ‑ManifestFile $myManifest ‑PhysicalDiskMap $myDiskMap

# the user can do something like:

# $myRestoreDiskMap[$myManifest.FileMaps[0]] = $myDiskMap.PhysicalDisks[1]

# if they want to manually change which disk gets written to by the restore.

Add-RestoreJobTemplate ‑JobName Restore178fromNFS ‑physicalMachine $myPM ‑RestoreDiskMap $myRestoreDiskMap ‑SavePoint $mySP

This command creates a restore job template that restores to the specified target physical machine. The restore disk map is a hashtable that has File Map entries from the savepoint as a key and Physical Disk Entities designating which disks should be restored to on the physical machine.

Related links

Add-BackupJobTemplate

Add-PhysicalMachine

Update-RestoreJobTemplate

Get-Job

Get-JobTemplate

Add-VirtualAppforLinuxFLR


Description	This command is obsolete and has been replaced with Add-VirtualAppforLinuxFLRVA.
Related links	Add-VirtualAppforLinuxFLRVA

Add-VirtualAppforLinuxFLRVA

Description

Adds a VA to perform Linux® FLR.

Syntax

Add-VirtualAppforLinuxFLRVA [‑VirtualApplianceUUID] <String> [<CommonParameters>]

Parameters

•

VirtualApplianceUUID <String>: VA UUID.

•

Examples

Add-VirtualAppforLinuxFLRVA ‑VirtualApplianceUUID 564d8ab2-6c7f-5915-0a94-b224b5a71570

Adds a VirtualCenter to the inventory.

Syntax

Add-VirtualCenter [‑DNSorIP] <String> [‑Username] <String> [‑UserPassword] <String> [[‑Port] [<Int>]] [<CommonParameters>]

Parameters

•

DNSorIP <String>: The DNS or IP for the VirtualCenter.

•

Username <String>: The user name for the VirtualCenter.

•

UserPassword <String>: The password for the VirtualCenter.

•

Port [<Int>]: The SDK Port for the VirtualCenter.

•

Examples

Add-VirtualCenter ‑DNSorIP 10.6.20.20 ‑Username administrator ‑RootPassword p@ssw0rd

This command adds a VirtualCenter to the inventory.

Disables enabled jobs.

Syntax

Disable-Job [‑JobTemplateIDs] <GUID[]> [<CommonParameters>]

Parameters

•

JobTemplateIDs <GUID[]>: Job template IDs for which to enable jobs. Disable multiple jobs by passing in comma-separated job template IDs.

•

Examples

--------------------EXAMPLE 1--------------------

Disable-Job ‑JobTemplateId 'F9C9E458-8E06-498D-8C2C-03CBE5515FD4'

This command disables the job if it is enabled and returns the job template entity.

--------------------EXAMPLE 2--------------------

$jobs = Get-JobTemplate | where {$_.IsEnabled ‑eq 1}

Disable-Job $jobs[0].Id

This command disables the first enabled job in the list and returns the job template entity.

Related links

Enable-Job

Remove-VirtualApplianceConfiguration

Get-JobTemplate

Remove-JobTemplate

Dismount-LinuxVolume


Description	Unmounts VAR disk from the Linux® FLR VA.
Syntax	Dismount-LinuxVolume [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Dismount-LinuxVolume
Related links	Mount-LinuxVolume

Enable-Job

Description

Enables disabled jobs.

Syntax

Enable-Job [‑JobTemplateIDs] <GUID[]> [<CommonParameters>]

Parameters

•

JobTemplateIDs <GUID[]>: Job template IDs for which to enable jobs.

•

Examples

--------------------EXAMPLE 1--------------------

Enable-Job ‑JobTemplateId 'F9C9E458-8E06-498D-8C2C-03CBE5515FD4'

This command enables the job if it is disabled and returns the job template entity.

--------------------EXAMPLE 2--------------------

$jobs = Get-JobTemplate | where {$_.IsEnabled ‑eq 0}

Enable-Job $jobs[0].Id

This command enables the first disabled job in the list and returns the job template entity.

Related links

Disable-Job

Remove-VirtualApplianceConfiguration

Get-JobTemplate

Remove-JobTemplate

Get-AddressBook


Description	Gets a list of email addresses from the address book.
Syntax	Get-Addressbook [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Get-Addressbook
Related links	New-EmailAddress

Get-BackupGroupEntity


Description	Returns a list of backup group entities.
Syntax	Get-BackupGroupEntity [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	--------------------EXAMPLE 1-------------------- Get-BackupGroupEntity This command gets a list of all backup group entities. --------------------EXAMPLE 2-------------------- Get-BackupGroupEntity \| where{$_.Name ‑eq 'BackupGroupName'} This command gets a list of backup groups by name.
Related links	None

Get-CatalogSearchData

Description

Returns the list of results for the matched search string, repositories, and VMs.

Syntax

Get-CatalogSearchData [‑SearchText] <String> [[‑RepositoryList] [<String>]] [[‑VMList] [‑Type] <Entity>] [<CommonParameters>]

Parameters

•

SearchText <String>: Search string.

•

RepositoryList [<Repository[]>]: Filter by Repositories. If not specified, all repositories are searched.

•

VMList [<Entity[]>]: Filter by entities. If not specified, all entities are searched.

•

Examples

--------------------EXAMPLE 1--------------------

Get-CatalogSearchdata ‑SearchText abcd

Gets the result set from the catalog database for matched search text. No repository or machine filtering is applied.

--------------------EXAMPLE 2--------------------

$repo = Get-Repository | where {$_.Name ‑eq 'Repo1'}

$vmList = Get-InventoryEntities ‑Type VirtualMachine | {$_.Name ‑eq 'VM1'}

Get-CatalogSearchdata ‑SearchText abcd ‑RepositoryList $repo ‑VMList $vm

Gets the result set from the catalog database for matched search text file read by repository and machine.

Gets the active status of Catalog for a list of savepoints.

Syntax

Get-CatalogStatus [‑Savepoints] <GUID[]> [<CommonParameters>]

Parameters

•

Savepoints <GUID[]>: List of Savepoint IDs.

•

Examples

Get-CatalogStatus ‑Savepoints 5a62765e-6a04-4df4-af54-46e5a38ad876

Gets the active status of the catalog data for the associated savepoint.

Related links

Get-CatalogSearchData

Returns the config option values for a specified type.

Syntax

Get-Configoption [‑Type] <String> [<CommonParameters>]

Parameters

•

Type <String>: Valid types are Database, Email, Resources, Timeout, General, LinuxFLR, and Cataloging.

•

Examples

Get-Configoption ‑Type Resources

Related links

Set-Resources

Set-Cataloging

Add-VirtualAppforLinuxFLR

Get-Connection

Description

Returns connection objects to Hosts or VirtualCenters. Without parameters, it returns all configured connections in vRanger. You can also get connections by name or type. Using the two parameters in the same command return an error.

Syntax

Get-Connection [[‑Name] [<String>]] [[‑Type] [<String>]] [<CommonParameters>]

Parameters

•

Name [<String>]: The name or IP address of the VMware® ESXi™ host, VMware® vCenter™, Hyper-V® host, or Hyper-V cluster.

•

Type [<String>]: Connection type: EsxHost, VirtualCenter, HypervHost, HypervCluster, or All.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: “get-help about_commonparameters”

Examples

--------------------EXAMPLE 1--------------------

Get-Connection ‑type HypervHost

This command gets a list of all Hyper-V host connections.

--------------------EXAMPLE 2--------------------

Get-Connection

This command gets a list of all vRanger loaded connections.

--------------------EXAMPLE 3--------------------

Get-Connection ‑Name myhost.dev.corp

This command returns a connection to the specified host.

--------------------EXAMPLE 4--------------------

Get-Connection ‑type EsxHost

This command gets a list of all ESXi host connections.

Related links

None

Get-CurrentTemplateVersionID

Description

Returns the current template version ID of a job template based on a historic template version ID. A new template version ID is assigned to the job template when it is modified.

Syntax

Get-CurrentTemplateVersionID [‑TemplateVersionID] [<String>] [<CommonParameters>]

Parameters

•

TemplateVersionID <GUID>: Template version ID.

•

Examples

Get-CurrentTemplateVersionID 6baedeed-227a-4350-ba3f-470f9e90dc07

This command returns the current template version ID of the job template referenced by the input template version ID.

Returns all datastores associated with the specified host.

Syntax

Get-Datastore [‑Host] <HostEntity> [<CommonParameters>]

Parameters

•

Host <HostEntity>: The host object.

•

Examples

Get-Datastore ‑Host $host

This command returns a list of datastores associated with the host.

Related links

Get-MonitorLog

Get-GlobalTransportFailover


Description	Gets the default Transport Failover order for replication jobs.
Syntax	Get-GlobalTransportFailover [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Get-GlobalTransportFailover This command gets the default Transport Failover order for replication jobs.
Related links	Update-GlobalTransportFailover Get-TransportFailover

Get-InventoryEntity

Description

Returns a list of inventory entities based on the input repository type. The command returns all inventory entities if no type is provided. You can also get inventory entities by type. There is a performance delay if all types are requested or no type is specified.

Syntax

Get-InventoryEntity [[‑Type] <String>] [[‑Block] <Boolean>] [[‑Thin] <Boolean>][<CommonParameters>]

Parameters

•

Type [<String>]: Inventory entity type: All, ClusterComputeResource, ComputeResource, DataCenter, EsxHost, Folder, HypervCluster, HypervHost, HypervVirtualMachine, ResourcePool, VirtualCenter, VirtualMachine, VirtualApp, PhysicalMachine.

•

Block [<Boolean>]: If set to true, the call blocks if inventory is being refreshed until it is done. Possible timeout might occur on large inventory sets.

•

Thin [<Boolean>]: If set to true, the call returns thin inventory objects.

•

Examples

--------------------EXAMPLE 1--------------------

Get-InventoryEntity‑ Type HypervHost

This command gets a list of all inventory entities.

--------------------EXAMPLE 2--------------------

Get-InventoryEntity ‑Type EsxHost

This command gets a list of all loaded VMware® ESXi™ host entities.

--------------------EXAMPLE 3--------------------

Get-InventoryEntity

This command gets a list of all inventory entities.

Related links

None

Get-IsInventoryRefreshing

Description

Returns “true” or “false” based on whether the inventory is refreshing at the time the cmdlet is run.

Syntax

Get-IsInventoryRefreshing [[‑Type] <String>] [<CommonParameters>]

Parameters

•

Type [<String>]: Inventory entity type to check: All, VMware, Hyper-V

•

Examples

--------------------EXAMPLE 1--------------------

Get-IsInventoryRefreshing ‑Type Hyperv

This command returns true if Hyper-V is refreshing.

--------------------EXAMPLE 2--------------------

Get-IsInventoryRefreshing

This command returns true if any inventory entity is refreshing.

--------------------EXAMPLE 3--------------------

Get-IsInventoryRefreshing ‑Type VMware

This command returns true if VMware is refreshing.

Returns jobs. Without parameters, Get-Job returns all past and current jobs. You can also get jobs by JobState within a time span or JobTemplateIDs. If JobTemplateIDs are specified, no other parameters can be used.

Syntax

Get-Job [[‑StartTime] [<String>]] [[‑EndTime] [<String>]] [[‑JobState] [<String>]] [[‑JobTemplateIDs] [<String>]] [<CommonParameters>]

Parameters

•

EndTime [<String>]: End time of time period.

•

StartTime [<String>]: Start time of time period.

•

JobState [<String>]: Job state: Queued, Running, Completed or All.

•

JobTemplateIDs [<String>]: Job template IDs for which to retrieve jobs. Separate multiple IDs with commas.

•

Examples

--------------------EXAMPLE 1--------------------

Get-Job

This command returns jobs in all states.

--------------------EXAMPLE 2--------------------

Get-Job ‑JobState Running

This command returns all running jobs.

--------------------EXAMPLE 3--------------------

Get-Job ‑starttime 2009-03-30 ‑endtime 2009-03-31 ‑JobState Completed

This command returns completed jobs that started during the specified time span.

--------------------EXAMPLE 4--------------------

Get-Job -JobTemplateIDs d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-2412990005f3

This command returns jobs based on the specified template ID.

Related links

Get-JobTemplate

Description

Returns a list of all jobs, on demand and scheduled (job templates). Without parameters, the command returns all job templates. You can also get job templates by Type or Inventory IDs.

Syntax

Get-JobTemplate [[‑Type] <String>] [[‑InventoryIds] <String[]>] [[‑Thin] <Boolean>] [[‑ID] <String>] [‑VersionID] <String>] [<CommonParameters>]

Parameters

•

Type [<String>]: Specifies the type of job template to retrieve: Backup, Restore, or All.

•

InventoryIds [<String>]: The inventory nodes’ virtualization object ref IDs. Separate multiple IDs with commas.

•

Thin [<Boolean>]: Whether to return a thin version of job templates. Returning thin objects can speed up commands and avoid performance-related errors. By default, full objects are returned.

•

ID [<String>]: Job template ID.

•

VersionID [<String>]: Job template version ID.

•

Examples

--------------------EXAMPLE 1--------------------

Get-JobTemplate

This command gets a list of all job templates.

--------------------EXAMPLE 2--------------------

Get-JobTemplate ‑type Backup

This command gets a list of all backup jobs.

--------------------EXAMPLE 3--------------------

Get-JobTemplate ‑InventoryIds d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-24

12990005f3 ‑Type Backup

This command returns backup job templates in the specified inventories.

Displays the vRanger Windows® error events.

Syntax

Get-MonitorLog [[‑EventId] <Int32>] [[‑StartDateTime] <DateTime>] [[‑EndDateTime] <DateTime>] [‑Verbose] [‑Debug] [‑ErrorAction <ActionPreference>] [‑WarningAction <ActionPreference>] [‑ErrorVariable <String>] [‑WarningVariable <String>] [‑OutVariable <String>] [‑OutBuffer <Int32>] [‑WhatIf] [‑Confirm]

Parameters

•

EventId <Int32>: Filter by event ID.

•

StartDateTime <DateTime>: Filter based on the start time.

•

EndDateTime <DateTime>: Filter based on the end time.

Examples

get-monitorlog ‑eventid 1000

Returns all networks associated with the host specified.

Syntax

Get-Network [‑Host] <HostEntity> [<CommonParameters>]

Parameters

•

Host <HostEntity>: The host object.

•

Examples

Get-Network ‑Host $host

This command returns a list of networks associated with the host.

Related links

Get-Datastore

Get-PhysicalMachineDiskMap

Description

Creates a Physical Machine disk map to be used in AddRestoreJobTemplate.

Syntax

Get-PhysicalMachineDiskMap [‑RestoreCDIP] <String> [<CommonParameters>]

Parameters

•

RestoreCDIP <String>: The physical machine IP address as shown when it is booted to the restore CD.

•

Examples

GetPhysicalMachineDiskMap ‑RestoreCDIP $IP

Creates a Physical Machine disk map to be used in AddRestoreJobTemplate.

Related links

Get-InventoryEntity

Add-RestoreJobTemplate

Get-Repository

Description

Returns repositories configured in vRanger. Without parameters, "Get-Repository" gets all repositories configured in vRanger. You can also get repositories by Name or Type. Using the two parameters in the same command returns an error.

Syntax

Get-Repository [[‑Id] [<String>]] [[‑Type] <String>] [<CommonParameters>]

Parameters

•

Type <String>: Specifies the type of repository to retrieve: CIFS, NFS, NVSD, DDB, or ALL.

•

Id <String>: Repository ID in GUID.

•

Examples

--------------------EXAMPLE 1--------------------

Get-Repository

This command gets a list of all vRanger repositories.

--------------------EXAMPLE 2--------------------

Get-Repository ‑id 034538e5-58a7-4d28-89c9-3249b620064a

This command a repository with the specified ID.

--------------------EXAMPLE 3--------------------

Get-Repository ‑type CIFS

This command gets a list of all CIFS repositories.

Returns a list of associated jobs based on the input repository ID.

Syntax

Get-RepositoryJob [‑RepositoryId] <String> [<CommonParameters>]

Parameters

•

RepositoryId <String>: Repository ID in GUID.

•

Examples

Get-RepositoryJob ‑RepositoryId 034538e5-58a7-4d28-89c9-3249b620064a

This command returns a list of jobs associated with the repository with the specified ID.

Related links

Get-Job

Get-JobTemplate

Get-RepositorySavePoint

Description

Returns a list of savepoints in the repository. All savepoints in the repository are returned if no time parameter is specified.

Syntax

Get-RepositorySavePoint [‑Id] <String> [[‑StartTime] [<String>]] [[‑EndTime] [<String>]] [<CommonParameters>]

Parameters

•

Id <String>: The repository ID to retrieve information for.

•

StartTime [<String>]: Start time of timespan during which the savepoints are complete.

•

EndTime [<String>]: End time of timespan during which the savepoints are completed.

•

Examples

Get-RepositorySavePoint ‑Id 034538e5-58a7-4d28-89c9-3249b620064a

This command returns a list of savepoints associated with the repository with the specified ID.

Creates a Hashtable that represents a matching of file map entries from the savepoint with the disks from a physical machine — a RestoreDiskMap.

Syntax

Get-RestoreDiskMap [‑PhysicalDiskMap] <PhysicalDiskMap> [‑ManifestFile] <ManifestFile> [<CommonParameters>]

Parameters

•

PhysicalDiskMap <PhysicalDiskMap>: The physical machine disk map.

•

ManifestFile <ManifestFile>: The manifest from the savepoint that contains file map entries for the disks backed up.

•

Examples

Get-RestoreDiskMap ‑PhysicalDiskMap $physicaldiskMap ‑ManifiestFile $manifestFile

This command matches the file map entries to the disks in a physical machine by size and returns a hash map that you can manipulate by code.

Related links

Add-BackupJobTemplate

Get-InventoryEntity

Get-SavepointDisk

Description

Returns the VM disks that the savepoint contains.

Syntax

Get-SavepointDisk [‑Id] <String> [<CommonParameters>]

Parameters

•

Id <String>: Savepoint ID in GUID format.

•

Examples

Get-SavePointDisk 91d27db5-4562-4456-918d-b0dc587e0e7f

This command returns all disks that have been backed up into the savepoint specified.

Related links

Get-VMDKVolume

Get-SavepointManifest

Description

Returns manifest of the savepoint.

Syntax

Get-SavePointManifest [‑ID] <ID> [<CommonParameters>]

Parameters

•

ID <ID>: The Savepoint ID.

•

Examples

Get-SavePointManifest $id

This command returns the savepoint manifest object.

Related links

Get-RepositorySavePoint

Get-VMDKVolume

Get-Savepoints

Description

Returns a list of savepoints for a specified BackupJobTemplateID.

Syntax

Get-SavePoints [‑BackupJobTemplateID] <GUID> [<CommonParameters>]

Parameters

•

BackupJobTemplateID <GUID>: The backup job template ID to retrieve savepoints for.

•

Examples

Get-SavePoints ‑BackupJobTemplateID 034538e2-58a7-4d28-89c9-3249b620064a

This command returns a list of savepoints associated with the backup template with the specified ID.

Related links

Get-Job

Get-JobTemplate

Get-TransportFailover

Description

Gets the Transport Failover order for replication jobs by TemplateVersion ID.

Syntax

Get-TransportFailover [‑TemplateVersionID] <String> [<CommonParameters>]

Parameters

•

TemplateVersionID <String>: Template version ID for job.

•

Examples

$jobtemplates = Get-JobTemplate ‑Type Replication

$template = $jobtemplates[0]

Get-TransportFailover ‑TemplateVersionID $template.TemplateVersionId

Gets the Transport Failover order for replication jobs by TemplateVersion ID.

Related links

Get-GlobalTransportFailover

Update-GlobalTransportFailover

Get-VirtualApplianceConfig

Description

Gets the VirtualApplianceConfig configuration from vRanger.

Syntax

Get-VirtualApplianceConfig [[‑VAName] [<String>]] [[‑HostName] [<String>]][<CommonParameters>]

Parameters

•

VAName [<String>]: The VA Name.

•

HostName [<String>]: The host name where the VA resides.

•

Examples

--------------------EXAMPLE 1--------------------

$va = Get-VirtualApplianceConfig

This command gets all the VA entities.

--------------------EXAMPLE 2--------------------

$va = Get-VirtualApplianceConfig ‑VAName ABC-Vzva-1.1.1

This command gets the VA entity for the VA specified.

--------------------EXAMPLE 3--------------------

$va = Get-VirtualApplianceConfig ‑HostName xyz.dev.eng.int

This command gets the VA entities for the Host specified.

Related links

New-VirtualAppliance

Update-VirtualAppliance

Remove-VirtualAppliance

Get-VirtualApplianceDeploymentStatus

Description

Gets the status of the re-configuration of VA in progress.

Syntax

Get-VirtualApplianceDeploymentStatus [‑DeploymentId] <GUID> [<CommonParameters>]

Parameters

•

ID <GUID>: Deployment ID for VA.

•

Examples

Get-VirtualApplianceReconfigStatus ‑Id $deploymentID

This command gets the status of the VA re-configuration.

Related links

Update-VirtualAppliance

New-VirtualAppliance

Get-VirtualApplianceReconfigStatus

Description

Gets the status of the deployment of VA in progress.

Syntax

Get-VirtualApplianceDeploymentStatus [‑DeploymentId] <GUID> [<CommonParameters>]

Parameters

•

DeploymentId <GUID>: Deployment ID for VA.

•

Examples

Get-VirtualApplianceDeploymentStatus ‑Id $deploymentID

This command gets the status of the VA deployment in progress.

Related links

Update-VirtualAppliance

New-VirtualAppliance

Get-VirtualMachinesUnderInventory

Description

Gets the child VM entities of the entity — host, cluster, and so on — provided.

Syntax

Get-VirtualMachinesUnderInventory [[‑InventoryEntityMoRefId] [<String>]] [<CommonParameters>]

Parameters

•

InventoryEntityMoRefId [<String>]: The MoRef ID of the parent inventory entity.

•

Thin [<Boolean>]: If set to true, the call returns thin inventory objects.

•

Examples

Get-VirtualMachinesUnderInventoryEntity ‑InventoryEntityMoRefId host-16641

The managed object reference ID of an inventory entity node such as a VMware® ESXi™ host or resource folder.

Related links

Add-BackupGroupEntity

Get-BackupGroupEntity

Get-InventoryEntity

Get-VmDisk

Description

Returns a list of VmDisks for the VM list in the same order of the input.

Syntax

Get-VmDisk [‑VMList] <VMEntity[]>] [<CommonParameters>]

Parameters

•

VMList <VMEntity[]>: A list of VM entities to retrieve disk information for.

•

Examples

Get-VmDisk ‑VMList $mylist

This command gets a list of VMDisks objects for the input VM list.

Returns all volumes on a certain VM disk.

Syntax

Get-VMDKVolume [‑VmdkID] <String> [‑Repository] <Repository> [‑RepositoryPassword] <String> [SavepointManifest] <ManifestFile> [<CommonParameters>]

Parameters

•

VmdkID <String>: UUID of the VMDK.

•

Repository <Repository>: Repository in which the savepoint resides in.

•

RepositoryPassword <String>: Repository password.

•

SavepointManifest <ManifestFile>: The savepoint manifest object.

•

Examples

Get-VMDKVolume ‑vmdkid $diskid ‑repository $repo ‑repositorypassword Password ‑savepointmanifest $manifest

This command returns all volumes of the specified VMDK.

Related links

None

Install-VirtualAppliance

Description

Deploys a new VA for vRanger.

Syntax

Install-VirtualAppliance [‑VAName] <String> [‑SelectedHost] <HostEntity> [‑OVFLocation] <String> [‑DownloadOVF] <Boolean> [[‑IPAddressOverride] <String>] [[‑ClusterDefault] <Boolean>] [‑CPUAllocation] <Int32> [‑MemorySizeInMB] <Int64> [‑VADatastore] <Datastore> [‑NetworkEntity] <Network> [[‑ScratchDiskDatastore] <Datastore>] [[‑ScratchDiskSizeInKB] <Int64>] [[‑NewPassword] <String>] [[‑UseVAForLFLR] <Boolean>] [[‑PowerOnVA] <Boolean>] [[‑VADeployStatus] <Boolean>] [[‑UseDHCP] <Boolean>] [[‑NetMask] <String>] [[‑StaticIP] <String>] [[‑GateWay] <String>] [[‑UseStaticDNS] <Boolean>] [[‑PrimaryDNS] <String>] [[‑SecondaryDNS] <String>] [[‑Domain] <String>] [[‑Search] <String>] [<CommonParameters>]

Parameters

•

VAName <String>: The VA name.

•

SelectedHost <HostEntity>: The host to associate the VA with.

•

OVFLocation <String>: The path to the local OVF.

•

DownloadOVF <Boolean>: Should the OVF be downloaded?

•

IPAddressOverride [<String>]: IP Address to use for the VA instead of the one retrieved from the VirtualCenter API.

•

ClusterDefault [<Boolean>]: If the selected host belongs to a cluster, share the VA among all hosts in the cluster.

•

CPUAllocation <Int>: Allocate CPU.

•

MemorySizeInMB <Int>: Assign memory in MB.

•

VADatastore <Datastore>: Select a datastore for the VA.

•

NetworkEntity <Network>: Select a network for the VA.

•

ScratchDiskDatastore [<Datastore>]: Select a datastore for the scratch disk.

•

ScratchDiskSizeInKB [<Int>]: Assign scratch disk in KB.

•

NewPassword [<String>]: New password for the VA; if this word is not mentioned, Original password (vzroot1) is used.

•

UseVAForLFLR [<Boolean>]: Use VA for Linux® FLR.

•

PowerOnVA [<Boolean>]: Power on VA after deployment complete.

•

VADeployStatus [<Boolean>]: Retrieves VA deployment status if set to true. Defaults to false if the parameter is not passed in.

•

UseDHCP [<Boolean>]: Specify use of DHCP to set IP address. If false, StaticIP, NetMask, Gateway, and PrimaryDNS must be specified.

•

NetMask [<String>]: Netmask for use with the VA’s static IP address. Required if UseDHCP is false.

•

StaticIP [<String>]: Static IP Address for the VA. Required if UseStaticIP is true.

•

GateWay [<String>]: Optional gateway address for VA.

•

UseStaticDNS [<Boolean>]: Specify use of a static DNS setup. If true, PrimaryDNS must be specified.

•

PrimaryDNS [<String>]: Mandatory address of primary DNS server for VA. Required if UseStaticDNS is true.

•

SecondaryDNS [<String>]: Optional address of secondary DNS server for VA.

•

Domain [<String>]: Optional Local domain name for DNS resolver on VA. For more information, see the Linux manual (man) page for resolv.conf.

•

Search [<String>]: Optional Search list for host name lookup for DNS on VA. For more information, see the Linux man page for resolv.conf.

•

Examples

$myhost = Get-InventoryEntities ‑Type esxhost | where{$_.Name ‑eq 'dev-pool001.dev.eng.int'}

$ds=Get-Datastore $myhost | where{$_.Name ‑like 'Local*'}

$nw=Get-Network ‑Host $myhost Install-VirtualAppliance ‑VAName kk-TestVASTaticIP ‑SelectedHost $myhost ‑OVFLocation 'X:\Development\Vzva\vzva-1.8.0.ova' ‑DownloadOVF 0 ‑CPUAllocation 1 ‑MemorySizeInMB 512 ‑VADatastore $ds ‑NetworkEntity $nw ‑PowerOnVA 1 ‑VADeployStatus 1 ‑UseDHCP 0 ‑staticIP 10.6.51.159 ‑NetMask 255.255.254.0 ‑Gateway 10.6.50.2 ‑UseStaticDNS 1 ‑PrimaryDNS 10.6.30.10

This command deploys a new VA configuration to vRanger using a locally saved OVF and retrieves the status of the currently deploying VA in progress. Default for VADeployStatus is false.

Related links

Get-VirtualApplianceConfig

Remove-VirtualAppliance

Update-VirtualAppliance

Mount-LinuxVolume

Description

Mounts a volume from the specified manifest FileMaps.

Syntax

Mount-LinuxVolume [‑ManifestFileMaps] <FileMapEntryLine[]> [‑Repository] <Repository> [‑RepositoryPassword] <String> [<CommonParameters>]

Parameters

•

ManifestFileMaps <FileMapEntryLine[]>: The savepoint manifest file map.

•

Repository <Repository>: The repository containing the VAR.

•

RepositoryPassword <String>: The password to the repository.

•

Examples

$path = Mount-LinuxVolume ‑repositorypassword xxxxxxxx ‑manifestfilemap [filemap] ‑repository [repo]

Creates a new backup flag for later use.

Syntax

New-BackupFlag [[‑BackupPoweredOnOnly] <Boolean>] [[‑CheckDestinationFreeSpace] <Boolean>] [[‑UseCompression] <Boolean>] [[‑UpdateNotes] <Boolean>] [[‑EnableGuestQuiescing] <Boolean>] [[‑EnableABM] <Boolean>] [[PerformNetworkBackupOnFailure] <Boolean>] [[‑UseFiber] <Boolean>] [[‑UseCataloging] <Boolean>] [[‑LanFree] <Boolean>] [[‑AllFlags] <Boolean>] [<CommonParameters>]

Parameters

•

BackupPoweredOnOnly [<Boolean>]: Whether to back up only VMs that are powered on.

•

CheckDestinationFreeSpace [<Boolean>]: Whether to check repository free space before backup.

•

UseCompression [<Boolean>]: Whether to use compression for backup.

•

UpdateNotes [<Boolean>]: Whether to update notes on VM after backup.

•

EnableGuestQuiescing [<Boolean>]: Whether guest quiescing is enabled.

•

EnableABM [<Boolean>]: Whether ABM is enabled.

•

PerformNetworkBackupOnFailure [<Boolean>]: [Deprecated] Formerly, whether to perform the backup using the network if there is a problem during the fiber or iSCSI backup.

•

UseFiber [<Boolean>]: [Deprecated] Formerly, whether to use fiber or iSCSI to perform this backup. Currently, whether to perform a LAN-free backup. Use LanFree instead.

•

UseCataloging [<Boolean>]: Whether to use cataloging to perform this backup.

•

EnableVSSApplicationLevelQuiescing [<Boolean>]: Whether to enable VSS Application Level Quiescing for this backup.

•

EnableVSSLogTruncation [<Boolean>]: Whether to enable VSS log truncation for this backup.

•

LanFree [<Boolean>]: Whether to perform a LAN-free backup.

•

AllFlags [<Boolean>]: Whether to use all available flags for the backup.

•

Examples

--------------------EXAMPLE 1--------------------

New-BackupFlag

This command returns a new BackupFlags object with the value of NoFlags.

--------------------EXAMPLE 2--------------------

New-BackupFlag ‑EnableGuestQuiescing 1 ‑EnableABM 1

This command returns a new BackupFlags object with the values of EnableGuestQuiescing and EnableABM.

--------------------EXAMPLE 3--------------------

New-BackupFlag ‑AllFlags 1

This command returns a new BackupFlags object with all flags set to on.

Related links

Add-BackupJobTemplate

New-BackupGroupMember

Description

Adds members to a backup group created using Add-BackupGroupEntity cmdlet or UI. You can add any inventory item as a member.

Syntax

New-BackupGroupMember [‑BackupGroupId] <GUID> [‑MemberEntity] <Entity> [<CommonParameters>]

Parameters

•

BackupGroupId <GUID>: The backup group ID.

•

MemberEntity <Entity>: Inventory entity to add to backup group.

•

Examples

$inventoryEntity = Get-InventoryEntity ‑type virtualmachine | where {$_.Name ‑eq 'VMNAMEHERE'}

New-BackupGroupMember 8c40f593-6608-45ef-b2c9-a2594aac2338 $inventoryEntity

Returns a Schedule object. The schedule provides a template daily schedule that can be further customized before use.

Syntax

New-DailySchedule [‑WeekdayOnly] <Boolean> [‑StartTime] <String> [<CommonParameters>]

Parameters

•

WeekdayOnly <Boolean>: Whether to run the job only on weekdays.

•

StartTime <String>: Job start time.

•

Examples

New-DailySchedule ‑WeekdayOnly 1 ‑StartTime "2009-03-31 12:00:00AM"

This command returns a daily job schedule that runs weekdays at midnight.

Adds an email address to the address book.

Syntax

New-EmailAddress [‑Name] <String> [‑Email] <String> [<CommonParameters>]

Parameters

•

Name <String>: Name of person.

•

Email <String>: Email address.

•

Examples

New-EmailAddress ‑Name Employee1 ‑Email firstname.lastname@company.com

Returns an interval schedule object.

Syntax

New-IntervalSchedule [[‑IntervalDays] <Int>] [[‑IntervalHours] [<Int>]][‑IntervalMinutes] <Int> [‑StartTime] <String> [[‑RangeEndDate] <String>] [[‑RangeByOccurrence] <Int>] [<CommonParameters>]

Parameters

•

IntervalDays <Int>: Number of days to use for interval schedule — the default is 0.

•

IntervalHours <Int>: Number of hours to use for interval schedule — the default is 0.

•

IntervalMinutes <Int>: Number of minutes to use for interval schedule — the default is 0.

•

StartTime <String>: Job start time.

•

RangeEndDate <String>: Range end date.

•

RangeByOccurrence <Int>: The maximum number of times a job is run.

•

Examples

--------------------EXAMPLE 1--------------------

New-IntervalSchedule ‑StartTime 2009-03-31 ‑IntervalHours 1

This command returns an interval job schedule that runs every hour.

--------------------EXAMPLE 2--------------------

New-IntervalSchedule ‑StartTime 2009-03-31 ‑IntervalMinutes 30 ‑RangeEndDate 2010-12-31

This command returns an interval job schedule that runs every 30 minutes until 2010-12-31.

--------------------EXAMPLE 3--------------------

New-IntervalSchedule ‑StartTime 2009-03-31 ‑IntervalHours 1 ‑ intervalMinutes 30 ‑RangeByOccurrence10

This command returns an interval job schedule that runs every hour and half; the job is run 10 times at this interval.

Returns a Schedule object. The schedule provides a template monthly schedule that can be further customized before use.

Syntax

New-MonthlySchedule [‑ExecutionDayOfMonth] <Int> [‑StartTime] <String> [<CommonParameters>]

Parameters

•

ExecutionDayOfMonth <Int>: Day of month on which the job runs — 1 to 31.

•

StartTime <String>: Job start time.

•

Examples

New-MonthlySchedule ‑ExecutionDayOfMonth 1 ‑StartTime "2009-03-31 12:00:00AM"

This command returns weekly job schedule that runs on the first of every month at midnight.

Helps you create a ReplicationFlags Enum object. Without parameters, the command returns NoFlags. You can pass in boolean parameters to specify which flags you want on.

Syntax

New-ReplicationFlag [[‑CheckDestinationFreeSpace] [<Boolean>]] [[‑UpdateNotes] [<Boolean>]] [[‑EnableGuestQuiescing] [<Boolean>]] [[‑EnableABM] [<Boolean>]] [[‑AllFlags] [<Boolean>]] [<CommonParameters>]

Parameters

•

CheckDestinationFreeSpace [<Boolean>]: Whether to check repository free space before replication.

•

UpdateNotes [<Boolean>]: Whether to update notes on VM after replication.

•

EnableGuestQuiescing [<Boolean>]: Whether guest quiescing is enabled.

•

EnableABM [<Boolean>]: Whether ABM is enabled.

•

AllFlags [<Boolean>]: Whether to use all available flags for the replication.

•

Examples

--------------------EXAMPLE 1--------------------

NewReplicationFlag

This command returns a new ReplicationFlags object with the value of NoFlags.

--------------------EXAMPLE 2--------------------

New-ReplicationFlag ‑EnableGuestQuiescing 1 ‑EnableABM 1

This command returns a new ReplicationFlags object with the values of EnableGuestQuiescing and EnableABM.

--------------------EXAMPLE 3--------------------

New-ReplicationFlag ‑AllFlags 1

This command returns a new ReplicationFlags object with all flags set to on.

Helps you create a RestoreFlags Enum object. Without parameters, the command returns NoFlags. You can pass in boolean parameters to specify which flags you want on.

Syntax

New-RestoreFlag [[‑ForceOverwrite] <Boolean>] [[‑ForcePowerOn] <Boolean>] [[‑UseFiber] <Boolean>] [[‑PerformNetworkRestoreOnFailure] <Boolean>] [[‑LanFree] <Boolean>] [[‑AllFlags] <Boolean>] [<CommonParameters>]

Parameters

•

ForceOverwrite [<Boolean>]: Whether to force overwrite of existing VM with same name.

•

ForcePowerOn [<Boolean>]: Whether to power on the VM for restore.

•

UseFiber [<Boolean>]: [Deprecated] Formerly, whether to use fiber or iSCSI to perform this restore. Currently, whether to perform a LAN-free restore. Use LanFree instead.

•

PerformNetworkRestoreOnFailure [<Boolean>]: [Deprecated] Formerly, whether to perform a network restore on a LAN-free restore failure.

•

LanFree [<Boolean>]: Whether to perform a LAN-free restore.

•

AllFlags [<Boolean>]: Whether to use all available flags for the restore.

•

AddHypervVirtualMachineToCluster [<Boolean>]: Whether to add the restored Hyper-V® VM to the cluster.

•

Examples

--------------------EXAMPLE 1--------------------

New-RestoreFlag

This command runs RestoreFlags with the value of NoFlags.

--------------------EXAMPLE 2--------------------

New-RestoreFlag ‑ForcePowerOn 1 ‑UseCompression 0

This command runs RestoreFlags with the values of ForcePowerOn.

--------------------EXAMPLE 3--------------------

New-RestoreFlag ‑AllFlags 1

This command runs RestoreFlags with all flags set to on.

New-SMTPServer [‑SMTPServer] <String> [‑Port] <Int> [‑FromEmail] <String> [<CommonParameters>]

Parameters

•

SMTPServer <String>: SMTP server address.

•

Port <Int>: Port number for SMTP server.

•

FromEmail <String>: Email address for sent email messages.

•

Examples

New-SMTPServer ‑SMTPServer company.smtp.com ‑Port 22 ‑FromEmail support@company.com

Related links

None

New-TransportConfiguration

Description

Helps you create a TransportConfiguration object. Without parameters, the command returns the default Automatic configuration. You can pass in boolean parameters to specify which settings you want on.

Syntax

New-TransportConfiguration [‑AutoSelectTransport] <Boolean> [‑RunLocal] <Boolean>[‑UseAdvancedTransport] <Boolean> [‑UseLanTransport] <Boolean> [[‑UseSsLforLan] <Boolean>] [<CommonParameters>]

Parameters

•

AutoSelectTransport <Boolean>: The service determines which transport type to use at run-time.

•

RunLocal <Boolean>: Whether to run the job on the local machine vs the VA.

•

UseAdvancedTransport <Boolean>: Whether the job should attempt to use an advanced transport (SAN/HotAdd) first.

•

UseLanTransport <Boolean>: Whether the job should attempt to use a network transport.

•

UseSsLforLan [<Boolean>]: Whether the job should use an encrypted connection when attempting a network transport.

•

Examples

--------------------EXAMPLE 1--------------------

New-BackupFlag ‑RunLocal 1 ‑UseAdvancedTransport 1 UseLANTransport 0

This command returns a new transport configuration object with the values of RunLocal, UseAdvancedTransport.

--------------------EXAMPLE 2--------------------

New-TransportConfiguration

This command returns a new transport configuration object with the configuration set to Automatic.

Related links

Add-BackupJobTemplate

Add-RestoreJobTemplate

New-VirtualAppliance

Description

Configures a VA for vRanger.

Syntax

New-VirtualAppliance [‑VAEntity] <Entity> [‑RootPassword] <String> [[‑IPAddressOverride] <String>] [[‑ClusterDefault] <Boolean>] [<CommonParameters>]

Parameters

•

VAEntity <Entity>: The VM Entity where the VA is deployed.

•

RootPassword <String>: Root Password for the VA.

•

IPAddressOverride <String>: New IP Address for the VA

•

ClusterDefault [<Boolean>]: Share the VA among all hosts in the cluster.

•

Examples

$va = Get-InventoryEntities ‑Type VirtualMachine | where {$_.Name ‑eq 'ABC-Vzva-1.1.1'}

New-VirtualAppliance ‑VAEntity $va ‑IPAddressOverride 10.6.50.19 ‑RootPassword vzroot1

This command adds a VA configuration to vRanger.

Related links

Update-VirtualAppliance

Remove-VirtualAppliance

Get-VirtualApplianceConfig

New-WeeklySchedule

Description

Returns a Schedule object. The schedule provides a template weekly schedule that can be further customized before use.

Syntax

New-WeeklySchedule [‑ExecutionDays] <String> [‑StartTime] <String> [<CommonParameters>]

Parameters

•

ExecutionDays <String>: Days of the week on which the job runs: Monday, Tuesday, and so on. Separate multiple days with commas.

•

StartTime <String>: Job start time.

•

Examples

--------------------EXAMPLE 1--------------------

New-WeeklySchedule ‑ExecutionDays "Monday" ‑StartTime "2009-03-31 12:00:00AM"

This command returns weekly job schedule that runs on Mondays at midnight.

--------------------EXAMPLE 2--------------------

New-WeeklySchedule ‑ExecutionDays "Monday,Tuesday" ‑StartTime "2009-03-31 12:00:00AM"

This command returns weekly job schedule that runs on Mondays and Tuesdays at midnight.

Returns a Schedule object. The schedule provides a template yearly schedule that can be further customized before use.

Syntax

New-YearlySchedule [‑ExecutionMonth] <Int> [‑ExecutionDayOfMonth] <Int> [‑StartTime] <String> [<CommonParameters>]

Parameters

•

ExecutionMonth <Int>: Month in which the job runs — 1 to 12.

•

ExecutionDayOfMonth <Int>: Day of month on which the job runs — 1 to 31.

•

StartTime <String>: Job start time.

•

Examples

New-YearlySchedule ‑ExecutionMonth 1 ‑ExecutionDayOfMonth 1 ‑StartTime "2009-03-31 12:00:00AM"

This command returns weekly job schedule that runs on the January 1 each year at midnight.

Related links

None

Remove-AllMount


Description	Removes all previously mounted paths. This operation should be performed as a cleanup step after all needed content is retrieved from the mounted path.
Syntax	Remove-Allmount [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Remove-AllMount This command removes all mounted paths.
Related links	None

Remove-BackupGroupEntity

Description

Deletes a backup group from vRanger. Remove-BackupGroupMember cmdlet is used to remove members from a backup Group created using this cmdlet or UI.

Syntax

Remove-BackupGroupEntity [‑BackupGroupId] <GUID> [<CommonParameters>]

Parameters

•

BackupGroupId <GUID>: The BackupGroup ID.

•

Examples

$bg = Get-BackupGroupEntity | where {$_.Name ‑eq 'BG1'}

Remove-BackupGroupEntity ‑BackupGroupId $bg.Id

Related links

None

Remove-BackupGroupMember

Description

Removes members from a backup group.

Syntax

Remove-BackupGroupMember [‑BackupGroupId] <GUID> [‑MemberEntity] <Entity> [<CommonParameters>]

Parameters

•

BackupGroupId <GUID>: The BackupGroup ID.

•

MemberEntity <Entity>: Inventory entity to remove from backup group.

•

Examples

$vm = Get-InventoryEntities | where {$_.Name ‑eq 'myVM'}

Remove-BackupGroupMember ‑BackupGroupId 5a62765e-6a04-4df4-af54 ‑46e5a38ad876 ‑MemberEntity $vm

Deletes the catalog data from the database for a list of savepoints.

Syntax

Remove-Catalog [‑Savepoints] <GUID[]> [<CommonParameters>]

Parameters

•

Savepoints <GUID[]>: List of savepoint IDs.

•

Examples

Remove-Catalog ‑Savepoints 5a62765e-6a04-4df4-af54-46e5a38ad876

Removes the catalog data associated with the savepoint from the database.

Related links

Get-CatalogSearchData

Get-CatalogStatus

Set-Cataloging

Remove-DdbStorageUnit

Description

Removes the EMC® Data Domain® Boost (DD Boost™) repository from vRanger and deletes all savepoints in the repository from the disk. The storage unit is also removed from the DD Boost device.

Syntax

Remove-DdbStorageUnit [‑Repository] <Repository> [‑Password] <String> [<CommonParameters>]

Parameters

•

Repository <Repository>: The DD Boost repository entity to remove.

•

Password <String>: Password for DD Boost user.

•

Examples

Remove-DdbStorageUnit ‑Repository $repo ‑Password Password123

This command removes the repository from vRanger and deletes all associated savepoints from the disk. The storage unit is also removed from the DD Boost device.

Removes a job template from vRanger.

Syntax

Remove-JobTemplate [‑Id] <String> [<CommonParameters>]

Parameters

•

ID <String>: The job template ID in GUID.

•

Examples

Remove-JobTemplate ‑Id $guid

This command removes the job template with the specified ID from vRanger.

Related links

Add-BackupGroupEntity

Add-RestoreJobTemplate

Get-JobTemplate

Remove-LinuxVolume


Description	This command is obsolete and has been replaced with Dismount-LinuxVolume.
Related links	Dismount-LinuxVolume

Remove-Repository

Description

Removes a repository from vRanger. Optionally, all savepoints in the repository can be deleted from the disk.

Syntax

Remove-Repository [‑Id] <String> [[‑RemoveSavePoints] [<Boolean>]] [<CommonParameters>]

Parameters

•

ID <String>: The repository ID in GUID.

•

RemoveSavePoints [<Boolean>]: Whether to remove all savepoints in the repositories. 0 or 1.

•

Examples

--------------------EXAMPLE 1--------------------

Remove-Repository ‑Id $guid

This command removes the repository with the specified ID from vRanger. All savepoints associated with the repository remain un-touched.

--------------------EXAMPLE 2--------------------

Remove-Repository ‑Id $guid ‑RemoveSavePoints 1

This command removes the repository with the specified ID from vRanger. All savepoint files in the repository are removed from disk as well.

Related links

Add-CIFSRepository

Add-VirtualAppforLinuxFLR

Add-HypervCluster

Add-NVSDRepository

Get-PhysicalMachineDiskMap

Remove-SavePoint

Description

Removes savepoints. If any of the specified savepoints has descendant savepoints, those savepoints are also removed.

Syntax

Remove-SavePoint [‑SavePointsToRemove] <SavePointList> [<CommonParameters>]

Parameters

•

SavePointsToRemove <SavePointList>: The list of savepoints to remove.

•

Examples

Remove-SavePoint ‑SavePointsToRemove $splist

This command removes the list of savepoints specified.

Related links

Get-RepositorySavePoint

Remove-Repository

Remove-VirtualAppliance

Description

Removes the VA configuration from vRanger.

Syntax

Remove-VirtualAppliance [‑VAId] <String> [<CommonParameters>]

Parameters

•

VAId <String>: The VA ID for the VA.

•

Examples

$va = Get-VirtualApplianceConfig ‑VAName KRN-Vzva-1.1.1

Remove-VirtualAppliance ‑VAId $va.VirtualApplianceID

This command removed a VA configuration.

Related links

New-VirtualAppliance

Update-VirtualAppliance

Get-VirtualApplianceConfig

Remove-VirtualApplianceConfiguration

Description

Removes the VA configuration from vRanger with an option to delete the VA from host.

Syntax

Remove-VirtualApplianceConfiguration [‑VAId] <String> [[‑DeleteVM] <Boolean>] [<CommonParameters>]

Parameters

•

VAId <String>: VA entity.

•

DeleteVM [<Boolean>]: Delete VA from host.

•

Examples

$va = Get-VirtualApplianceConfig ‑VAName KRN-Vzva-1.1.1

Remove-VirtualAppliance ‑VAId $va.VirtualApplianceID ‑DeleteVM 1

This command removes a VA configuration from vRanger and also deletes the VM from Host.

Related links

New-VirtualAppliance

Update-VirtualAppliance

Get-VirtualApplianceConfig

Run-JobsNow

Description

Runs jobs specified by their template IDs. Use the Get-JobTemplate cmdlet to view the template IDs of configured job templates.

Syntax

Run-JobsNow [‑TemplateIds] <String> [<CommonParameters>]

Parameters

•

TemplateIds <String>: The job template IDs. Separate multiple IDs with commas.

•

Examples

Run-JobsNow d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-2412990005f3

This command runs jobs specified by their templates.

Related links

Add-BackupGroupEntity

Add-RestoreJobTemplate

Get-Job

Get-JobTemplate

Run-ReplicationFailover

Description

Fails over the replication pass to the replica.

Syntax

Run-ReplicationFailover [‑TemplateId] <String> [[‑Sync] [<String>]] [<CommonParameters>]

Parameters

•

TemplateId <String>: Replication job template ID.

•

Sync [<Boolean>]: Whether to sync replica before failing over.

•

Examples

Run-ReplicationFailover ‑TemplateID d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-2412990005f3

This command runs replication failover based on the job template ID.

Related links

Run-TestReplicationFailover

Run-ResumeReplicationFailover

Description

Resumes test replication failover based on the test replication task ID.

Syntax

Run-ResumeReplicationFailover [‑TaskId] <String> [<CommonParameters>]

Parameters

•

TaskID <String>: Replication test failover task ID.

•

Examples

Run-ResumeReplicationFailover ‑TaskID d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-2412990005f3

Related links

Run-TestReplicationFailover

Run-ReplicationFailover

Run-TestReplicationFailover

Description

Runs test replication failover based on the replication job’s template version ID.

Syntax

Run-TestReplicationFailover [‑TemplateVersionId] <GUID> [[‑EnableNetwork] <Boolean>] [<CommonParameters>]

Parameters

•

TemplateVersionID <String>: Replication job template version ID.

•

EnableNetwork [<Boolean>]: Let replica network be enabled during a test failover.

•

Examples

Run-TestReplicationFailover ‑TemplateVersionId d7ebc5c4-7916-44c4-a0c2-2412999735f3,d7ebc5c4-7916-44c4-a0c2-2412990005f3

This command runs test failover on a replication job.

Related links

Run-ResumeReplicationFailover

Run-ReplicationFailover

Set-Cataloging

Description

Enables or disables global cataloging flag.

Syntax

Set-Cataloging [‑Catalog] <Boolean> [<CommonParameters>]

Parameters

•

Catalog <Boolean>: Boolean value to enable or disable global cataloging.

•

Examples

Set-Cataloging ‑Catalog 1

Related links

Remove-Catalog

Get-CatalogSearchData

Set-CBTonVM

Description

Enables or disables CBT for VMs if it is supported.

Syntax

Set-CBTonVM [‑VM] <VMEntity> [‑CBT] [<Boolean>] [<CommonParameters>]

Parameters

•

VM <VMEntity>: VM for which to enable CBT.

•

CBT [<Boolean>]: Enable or disable CBT.

•

Examples

$vm = Get-InventoryEntities ‑type virtualmachine | where{$_.Name ‑eq 'xyz'}

Set-CBTonVM ‑VM $vm ‑CBT 1

This command enables CBT on the VM xyz if it is supported on the VMware® ESXi™ host.

Related links

None

Set-LinuxVolume


Description	This command is obsolete and has been replaced with Mount-LinuxVolume.
Related links	Mount-LinuxVolume

Set-MountPath

Description

Sets mount path for a volume. After this operation, the specified volume is mounted to the path specified.

Syntax

Set-MountPath [‑Volume] <Volume> [‑Path] <String> [<CommonParameters>]

Parameters

•

Volume <Volume>: The volume to mount.

•

Path <String>: The path to which the volume should be mounted to.

•

Examples

Set-MountPath ‑volume $v ‑path 'E:\'

This command mounts the specified volume in the savepoint to the E:\ drive.

Related links

Get-PhysicalMachineDiskMap

Get-RepositorySavePoint

Sets values for vRanger resources.

Syntax

Set-Resources [[‑NumberTasksVRanger] <Int>] [[‑NumberTasksLUN] <Int>] [[‑NumberTasksHost] <Int>] [[‑NumberTasksRepository] <Int>] [[‑NumberTasksLocal] <Int>] [[‑Timeout] <Int>] [[‑MinimumSpaceHost] <Int>] [[‑NumberTasksVA] <Int>] [<CommonParameters>]

Parameters

•

NumberTasksVRanger [<Int>]: Maximum number of tasks running on vRanger (>=1).

•

NumberTasksLUN [<Int>]: Maximum number of tasks running off a LUN — 1 to 5.

•

NumberTasksHost [<Int>]: Maximum number of tasks running on a host — 1 to 4.

•

NumberTasksRepository [<Int>]: Maximum number of tasks running per Repository — >=1.

•

NumberTasksLocal [<Int>]: Maximum number of tasks running locally — 1 to 20.

•

Timeout [<Int>]: Task Timeout in hours — 1 to 999.

•

MinimumSpaceHost [<Int>]: Minimum space needed on host (GBs).

•

NumberTasksVA [<Int>]: Maximum number of tasks running on a VA — 1 to 8.

•

Examples

Set-Resources ‑NumberTasksVRanger 10 ‑Timeout 2

Sets the maximum tasks run on vRanger and the Timeout for each task.

Cancels a running job.

Syntax

Stop-vRangerJob [‑JobID] <String> [<CommonParameters>]

Parameters

•

JobID <String>: Job ID for which to cancel job.

•

Examples

--------------------EXAMPLE 1--------------------

Stop-vRangerJob ‑JobId 'F9C9E458-8E06-498D-8C2C-03CBE5515FD4'

This command cancels the job if it is running and returns the success or failure message.

--------------------EXAMPLE 2--------------------

$jobs = Get-Job | where {$_.JobState ‑eq 'Running'}

Stop-vRangerJob $jobs[0].Id

This command cancels the first running job in the list and returns the success or failure message.

Related links

Remove-VirtualApplianceConfiguration

Get-Job

Update-BackupJobTemplate

Description

Updates a backup job template. You also have the option of running the job immediately after the template is updated.

Syntax

Update-BackupJobTemplate [‑JobTemplate] <BackupJobTemplate> [[‑JobName] <String>] [[‑JobDescription] <String>] [[‑ExcludedVMList] <String>] [[‑IncludedDiskList] <String>] [[‑TargetRepository] <Repository>] [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | BackupPoweredOnOnly | CheckDestinationFreeSpace | UseCompression | UpdateNotes | EnableGuestQuiescing | EnableABM | UseFiber | PerformNetworkBackupOnFailure | UseCataloging | AllFlags>] [[‑NumberOfSavePoints] <Int>] [[‑SpaceSavingTechnologyTypeFlag] <None | Incremental | Differential>] [[‑SpaceSavingCountThreshold] <Int>] [[‑SpaceSavingPercentSizeThreshold] <Int>] [[‑NotificationList] <String>] [[‑RunJobNow] <Boolean>] [[‑TransportConfiguration] <TransportConfiguration>] [<CommonParameters>]

Parameters

•

JobTemplate <BackupJobTemplate>: Existing job template.

•

JobName [<String>]: Job name.

•

JobDescription [<String>]: Job description.

•

ExcludedVMList [<String>]: List of VMs to exclude from this job.

•

IncludedDiskList [<String>]: List of virtual disks to include in this job.

•

TargetRepository [<Repository>]: Repository where the backups are to be stored.

•

JobSchedule [<Schedule>]: Schedule on which the job runs.

•

Flags [<Nullable`1>]: Backup flags.

•

NumberOfSavePoints [<String>]: Max number of savepoints to store before older ones are removed.

•

SpaceSavingTechnologyTypeFlag [<String>]: Space saving technology to use: differential, incremental, or none.

•

SpaceSavingCountThreshold [<String>]: The number to save before performing a full backup.

•

SpaceSavingPercentSizeThreshold [<String>]: The size to allow as a % of the VM hard disk file before performing a differential backup.

•

NotificationList [<String>]: Email notification list for the job.

•

RunJobNow [<Boolean>]: Whether to run the job now.

•

TransportConfiguration [<TransportConfiguration>]: The transport configuration options to use for this job.

•

FullBackupSchedule [<List~1>]: The days to perform a full backup.

•

Examples

get-jobtemplate backup |where{$_.jobname ‑eq 'my first backup job'}|

Update-BackupJobTemplate ‑JobName 'modified by vapi'

This command adds a backup job template. Because the RunJobNow flag is not specified, the job is not going to run immediately.

Related links

Add-BackupJobTemplate

Get-Job

Get-JobTemplate

Update-GlobalTransportFailover

Description

Updates the default Transport Failover order for replication jobs.

Syntax

Update-GlobalTransportFailover [‑TransportFailover] <String> [<CommonParameters>]

Parameters

•

TransportFailover <String>: Transport Failover order separated by commas to be attempted until the task is successful. Valid types are VA-HotAdd and VA-Network.

•

Examples

Update-GlobalTransportFailover ‑TransportFailover VA‑Network

This command updates the default Transport Failover order for replication jobs.

Related links

Get-GlobalTransportFailover

Get-TransportFailover

Update-HypervRestoreJobTemplate

Description

Updates a restore job template. You also have the option of running the job immediately after the template is updated.

Syntax

Update-HypervRestoreJobTemplate [-JobTemplate] <HypervRestoreJobTemplate> [[-JobName] <String>]

[[-JobDescription] <String>] [[-SavePoint] <HypervSavePoint>]

[-JobSchedule] <Schedule>] [[-Flags] <NoFlags | ForceOverwrite | ForcePowerOn | AddHypervVirtualMachineToCluster | AllFlags>]

[[-NotificationList] <List`1>] [[-RunJobNow] <Boolean>]

[[-VMName] <String>] [[-TargetHost] <String>] [[-VmLocation] <String>] [[-SkipDisks] <List`1>] [[-DiskLocations] <List`1>]

[[-TargetNetworks] <List`1>] [[-SkipAdapters] <List`1>] [<CommonParameters>]

Parameters

•

JobTemplate <HypervRestoreJobTemplate>: Restore job template to update.

•

JobName <String>: Job name.

•

JobDescription [<String>]: Job description.

•

SavePoint <HypervSavePoint>: Savepoint to restore.

•

JobSchedule [<Schedule>]: Schedule on which the job runs. If not set, the job runs on demand.

•

Flags [<Nullable`1>]: Restore flags. If not set, the job has no flags.

•

NotificationList [<List`1>]: Separate multiple email addresses with commas.

•

RunJobNow [<Nullable`1>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

TargetHost [<String>]: Fully qualified domain name or IP address of the target host.

•

VmLocation [<String>]: Location on target host where the restored VM is located. If not set, the default for the host is used.

•

SkipDisks [<List`1>]: Sequence number — base 0 — of the disks to skip from the savepoint. Separate multiple numbers with commas.

•

DiskLocations [<List`1>]: Disk locations to use on the target host. Separate multiple values with commas. If only one is supplied, it is used for all disks on the VM If not set, the default disk location for the host is used for all disks.

•

SkipAdapters [<List`1>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas.

•

Examples

--------------------EXAMPLE 1--------------------

$savepoint = Get-Repository |where{$_.name -eq

'local'}|Get-RepositorySavepoint |where{$_.VmUuid -eq '12312312312313'}

Get-JobTemplate restore |where{$_.jobname -eq 'my restore

job'}|Update-HypervRestoreJobTemplate -savepoint $savepoint

This command updates a restore job template to restore a different

savepoint.

Related links

Add-RestoreJobTemplate

Get-JobTemplate

Get-Job

Update-Inventory


Description	Refreshes the inventory.
Syntax	Update-Inventory [<CommonParameters>]
Parameters	<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug, ‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"
Examples	Update-Inventory This command refreshes the inventory.
Related links	None

Update-ReplicationJobTemplate

Description

Updates a replication job template. You also have the option of running the job immediately after the template is updated.

Syntax

Update-ReplicationJobTemplate [‑JobTemplate] <ReplicationJobTemplate> [[‑JobName] <String>] [[‑JobDescription] <String>] [[‑TargetHost] <HostEntity>][[‑ReplicateName] <String>] [[‑Type] <String>] [[‑TargetNetworks] <String>] [[‑PrimaryDatastore] <String>] [[‑TargetDatastores] <String>] [[‑JobSchedule] <Schedule>] [[‑TransportFailover] <String>] [[‑NotificationList] <String>] [[‑Flags] <NoFlags | ReplicatePoweredOnOnly | CheckDestinationFreeSpace | UseCompression | UpdateNotes | EnableGuestQuiescing | EnableABM | AllFlags>] [[‑RunJobNow] <Boolean>] [[‑IncludedDisk] <String>] [<CommonParameters>]

Parameters

•

JobTemplate <ReplicationJobTemplate>: Replication job template to update.

•

JobName [<String>]: Job name.

•

JobDescription [<String>]: Job description.

•

TargetHost [<HostEntity>]: Target Host entity to which the VM is replicated.

•

ReplicateName [<String>]: Name of replicated VM.

•

Type [<String>]: Replication type. Valid types are Differential and Hybrid.

•

TargetNetworks <String>: Networks to use on the target host. Separate multiple values with commas.

•

PrimaryDatastore [<String>]: Primary Datastore on target host on which the replicated VM is located.

•

TargetDatastores [<String>]: Datastores to use on the target host. Separate multiple values with commas.

•

JobSchedule [<Schedule>]: The recurrence schedule on which the job runs.

•

TransportFailover [<String>]: Transport Failover order separated by commas to be attempted until the task is successful. Valid types are VA-HotAdd and VA-Network.

•

NotificationList [<String>]: Email notification list for the job. Separate multiple email addresses with commas.

•

Flags [<ReplicationFlags>]: Replication flags: NoFlags, ReplicatePoweredOnOnly, CheckDestinationFreeSpace, UseCompression, UpdateNotes, EnableGuestQuiescing, AllFlags. Separate multiple flags with pipes (|).

•

IncludedDisk [<Int>]: List of disks to include in this job. All VM disks are replicated if none is specified.

•

RunJobNow [<Boolean>]: Whether to run the job immediately after the job template is created.

•

Examples

get-jobtemplate replication|where{$_.jobname ‑eq 'my first replication job'}|Update-ReplicationJobTemplate ‑JobName 'new name'

This command updates a replication job template with a new name.

Update-RestoreJobTemplate

Description

Updates a restore job template. You also have the option of running the job immediately after the template is updated.

Syntax

Update-RestoreJobTemplate [‑JobTemplate] <RestoreJobTemplate> [[‑JobName] <String>] [[‑JobDescription] <String>] [[‑SavePoint] <Savepoint>] [[‑JobSchedule] <Schedule>] [[‑Flags] <NoFlags | ForceOverwrite | ForcePowerOn | UseFiber | PerformNetworkRestoreOnFailure | AllFlags>] [[‑NotificationList] <String>] [[‑RunJobNow] <Boolean>] [[‑VMName] <String>] [[‑TargetHost] <String>] [[‑PrimaryDatastore] <String>] [[‑SkipDisks] <String>] [[‑TargetDatastores] <String>] [[‑TargetNetworks] <String>] [[‑SkipAdapters] <String>] [[‑TransportConfiguration] <TransportConfiguration>] [<CommonParameters>]

Parameters

•

JobTemplate <String>: The restore job template to update.

•

JobName [<String>]: Job name.

•

JobDescription [<String>]: Job description.

•

SavePoint [<Savepoint>]: Savepoint to restore. This parameter is not required if the restore job template contains only one savepoint.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

JobSchedule [<Schedule>]: Schedule on which the job runs. If not set, the job runs on demand.

•

Flags [<RestoreFlags>]: Restore flags. If not set, NoFlag. Restore flags: NoFlags, AllFlags, ForceOverwrite, ForcePowerOn. Separate multiple flags with pipes (|).

•

NotificationList [<String>]: Email notification list for the job. Separate multiple email addresses with commas.

•

RunJobNow [<Boolean>]: Whether to run the job now. If not set, the job does not run immediately after creation of the template.

•

VMName [<String>]: Name of the restored VM. If not set, the VM name in the savepoint is used.

•

TargetHost [<String>]: Fully qualified domain name or IP address of the target host.

•

SkipAdapters [<String>]: Sequence number — base 0 — of the adapters to skip in the restore job. Separate multiple numbers with commas.

•

TransportConfiguration [<TransportConfiguration>]: The transport configuration options to use for this job.

•

Examples

--------------------EXAMPLE 1--------------------

$temp = get-jobtemplate restore |where{$_.jobname ‑eq 'my restore job'}

update-restorejobtemplate ‑jobtemplate $temp ‑jobname vapirestore

This command updates a restore job template name.

--------------------EXAMPLE 2--------------------

$savepoint = get-repository |where{$_.name ‑eq 'local'}|get-repositorysavepoint |where{$_.VMUUID ‑eq '12312312312313'}

get-jobtemplate restore |where{$_.jobname ‑eq 'my restore job'}|update-restorejobtemplate ‑savepoint $savepoint

This command updates a restore job template to restore a different savepoint.

Update-VirtualAppliance


Description	This command is obsolete. Use Update-VirtualApplianceConfiguration instead.
Related links	New-VirtualAppliance Remove-VirtualAppliance Get-VirtualApplianceConfig

Update-VirtualApplianceConfiguration

Description

Updates the VA configuration from vRanger.

Syntax

Update-VirtualApplianceConfiguration [‑VirtualApplianceEntity] <VirtualApplianceConfig> [‑IPAddressOverride] <String>] [[‑ClusterDefault] <Boolean>][[‑CPUAllocation] <Int>] [[‑MemorySizeInMB] <Int>] [[‑ScratchDiskDatastore] <Datastore>] [[‑ScratchDiskSizeInKB] <Int>] [‑NewPassword] <String>][[‑UseVAForLFLR] <Boolean>] [[‑DeleteScratchDisk] <Boolean>] [[‑VAReconfigurationStatus] <Boolean>] [<CommonParameters>]

Parameters

•

VirtualApplianceEntity <VirtualApplianceConfig>: The VM Entity to reconfigure.

•

IPAddressOverride [<String>]: IP Address to use for the VA instead of the one retrieved from the VMware® vCenter™ API.

•

ClusterDefault [<Boolean>]: If the selected host belongs to a cluster, share the VA among all hosts in the cluster.

•

CPUAllocation [<Int>]: Allocate CPU.

•

MemorySizeInMB [<Int>]: Assign memory in MB.

•

ScratchDiskDatastore [<Datastore>]: Select a datastore for the scratch disk.

•

ScratchDiskSizeInKB [<Int>]: Assign scratch disk in KB.

•

NewPassword [<String>]: New password for the VA, if this word is not specified, the password remains unchanged.

•

UseVAForLFLR [<Boolean>]: Use VA for Linux® FLR.

•

DeleteScratchDisk [<Boolean>]: If set to true, deletes the scratch disk — the default is false.

•

VAReconfigurationStatus [<Boolean>]: Retrieves VA deployment status if set to true. If the parameter is not passed in, the default is false.

•

<CommonParameters>: This cmdlet supports the common parameters: ‑Verbose, ‑Debug,‑ErrorAction, ‑ErrorVariable, and ‑OutVariable. For more information, type: "get-help about_commonparameters"

Examples

$va = Get-VirtualApplianceConfig ‑VAName KRN-Vzva-1.1.1 Update-VirtualApplianceConfiguration ‑VirtualApplianceEntity $va ‑CPUAllocation 2 ‑VAReconfigurationStatus 1

This command updates the VA configuration and sets CPUAllocation to 2. Setting VAConfigurationStatus to true retrieves the status of the VA reconfiguration in progress. Default is false.

Related links

New-VirtualAppliance

Remove-VirtualAppliance

Get-VirtualApplianceConfig

製品を選択してください:

サービス向上のために、「Purpose of your Chat（チャットの目的）」を記入してください。

お客様の不具合に推奨されるソリューション

vRanger 7.8.5 - User Guide

Replication

Cmdlet help

vAPI Cmdlet details