Understanding nightly jobs
Nightly jobs are daily automated tasks that occur at a predetermined time outside of normal business hours. These jobs are memory-intensive, and include various integrity checks and data consolidation tasks that are best conducted when the Rapid Recovery Core is less active.
All the nightly jobs, and the scope for which they can be applied, are described in the following table. Nightly jobs can be managed at the Core level (which applies to all machines protected on the Core). Those nightly jobs which can also be applied for a specific protected machine list the scope as "Protected machine."
| Job Name | Scope | Description | ||
|---|---|---|---|---|
|
|
N/A |
This control opens the Nightly Jobs dialog box, where you can enable, disable, or change settings for each nightly job. | ||
|
Nightly jobs time |
All |
This setting represents the time that nightly jobs are scheduled to start running. Quest recommends configuring your Core to run nightly jobs during a time of low activity. The default time is 12:00 AM. | ||
|
Check attachability of SQL Server databases |
Protected machine |
Checks the integrity of recovery points containing SQL databases. For more information, see Managing Core SQL attachability settings. | ||
|
Check checksum of Exchange databases |
Protected machine |
Checks the integrity of recovery points containing Exchange Database (EDB) files.
| ||
|
Check integrity of Oracle databases |
Core or protected machine |
Checks the integrity of Oracle databases using the DBVERIFY utility. Process:
| ||
|
Check integrity of recovery points |
Core or protected machine |
Checks the integrity of recovery points for each protected machine.
Process:
| ||
|
Clean orphaned registry keys on Hyper-V agents |
|
For Hyper-V hosts using Rapid Recovery release 6.1.x agentless protection, this nightly job cleans orphaned keys made in the Windows registry for each attach and detach operation. The registry entries are harmless, but over time can accumulate, leading to slower performance.
| ||
|
Consolidate VMware snapshots for protected virtual machines |
Core or protected machine |
This nightly job is relevant if you use native VMware APIs to protect machines without the Rapid Recovery Agent software. You should periodically consolidate VMware snapshots. Enabling this nightly job lets you perform these consolidations on a daily basis. This nightly job contains one parameter, Maximum simultaneous consolidations, which must be set to a number between 1 and 100. | ||
|
Deferred delete |
Core |
This setting lets you defer removal of recovery points from the repository until the time specified in your Core to perform nightly jobs. When enabled, then after other nightly jobs run, Core processing is dedicated to running the "Deleting records previously flagged for deletion" job. That job removes marked recovery points from the repository until they are all removed, or until four hours have passed from the nightly jobs execution time. Nightly jobs then end, and other queued jobs resume. Any remaining deletions occur in the background, concurrent with other tasks, until the next day's nightly jobs run.
Quest recommends leaving this nightly job disabled unless you are encountering transfer performance issues related to backed-up recovery point deletions. If you enable this option, Quest recommends reviewing your Core jobs to ensure most recovery points marked for deletion are removed from the repository within a one-week period. This approach helps to balance maximum transfer performance with maximum reclamation of repository space. | ||
|
Delete old events and jobs |
Core |
Maintains the scale of the events database by removing old events. The number of days is configurable, defaulting to 30 days. | ||
|
Log truncation for Exchange |
Protected machine |
Maintains the size of Exchange logs by truncating the exchange database transaction log to match the last recovery point.
| ||
|
Log truncation for Oracle |
Protected machine |
Controls truncation for Oracle logs. When enabled, truncation occurs when nightly jobs run, according to the deletion policy selected.
| ||
|
Log truncation for SQL Server |
Protected machine |
Maintains the size of SQL Server logs by truncating the database transaction log to match the last recovery point.
| ||
|
Rollup |
Core or protected machine |
Applies the retention policy to your backed-up data by combining or "rolling up" recovery points on the schedule dictated in the policy. You can customize the policy on the Core, which applies by default to all protected machines. By default, the rollup job is run for the whole Core; or click For more information about using a retention policy on a protected machine that differs from the default policy set in the Core, see Customizing retention policy settings for a protected machine. |
![[Expand]](/it-it/technical-documents/image/b8f6d3d1-cbe7-44c8-a872-ccaa95cdfb84)
[Expand] to expand the view of protected machines. You can then define the set of protected machines you want to roll up using the Core policy.Configuring nightly jobs for the Core
When any nightly job option is enabled on the Rapid Recovery Core, the selected job executes once daily at the time specified for all machines that are protected by the Core. Conversely, if you disable any nightly job at the Core level, the specified job no longer executes for all machines protected by the Core.
|
|
NOTE: If the scope of a nightly job, as described in the topic Understanding nightly jobs, includes protected machines, you can configure that nightly job to apply only for one or more specific protected machines individually. For more information about applying nightly job settings specific to a protected machine, see Customizing nightly jobs for a protected machine. |
Because nightly jobs are memory-intensive, Quest recommends configuring your Core to execute them during a time of low activity. The default schedule to run nightly jobs is 12:00 am. If another time is more suitable, change this setting in the Nightly Jobs Time field using this procedure.
- Navigate to the Rapid Recovery Core Console.
- On the icon bar, click
(Settings), and then do one of the following:
- From the list of Core settings on the left side of the Settings page, click Nightly Jobs.
- Scroll down on the right side of the Settings page until you can see the Nightly Jobs heading.
- To change any nightly job, or to change the time that nightly jobs begin to execute, click
Change.
The Nightly Jobs dialog box displays.
- If you want to change the time nightly jobs execute, enter a new time in the Nightly job times text box.
- In the first column, click to select each nightly jobs option you want to set for the Core. Click any selected option to clear it.
- Click OK.
The Nightly Jobs dialog box closes and your nightly jobs settings for the Core are saved.
Modifying transfer queue settings
Transfer queue settings are Core-level settings that establish the maximum number of concurrent transfers and the maximum number of retries for transferring data.
Complete the steps in this procedure to modify transfer queue settings.
- Navigate to the Rapid Recovery Core Console.
- On the icon bar, click
- From the list of Core settings on the left side of the Settings page, click Transfer Queue.
- Scroll down on the right side of the Settings page until you can see the Transfer Queue heading.
- Click on the setting you want to change.
The setting you selected becomes editable.
- Enter the configuration information as described in the following table.
Table 21: Transfer queue settings information Text Box Description Maximum concurrent transfers Enter a value to update the number of concurrent transfers. Set a number from 1 to 60. The smaller the number, the lesser the load on network and other system resources. As the number of agents that are processed increases, so does the load on the system.
Maximum retries Enter a value to set the maximum number of attempts before canceling the transfer operation. Set a number from 1 to 60.
- For each setting, when satisfied with your changes, click
to save the change and exit edit mode, or click
to exit edit mode without saving.
Adjusting client timeout settings
Client timeout settings control the length of time that various operations are attempted before the operation times out.
|
|
NOTE: Quest recommends leaving default timeout settings unless you experience specific issues in your environment, and you are advised by a Quest Data Protection Support representative to modify the settings. |
Complete the steps in this procedure to adjust client timeout settings.
- Navigate to the Rapid Recovery Core Console.
- On the icon bar, click
- From the list of Core settings on the left side of the Settings page, click Client Timeout.
- Scroll down on the right side of the Settings page until you can see the Client Timeout heading.
- Click on the setting you want to change.
The setting you selected becomes editable.
- Enter the configuration information as described in the following table.
Table 22: Client timeout settings information Setting Description Connection timeout
Controls the timeout for the connection between the Core and protected machines when sending data across the hypertext transfer protocol (http).
Enter the amount of time you want to lapse before a connection timeout occurs. Uses HH:MM:SS format.
NOTE: The default setting is 0:05:00 or five minutes.
Read/Write timeout
Controls the timeout for the connection between the Core and protected machines when reading or writing stream data across http. An example is receiving changed data blocks from a protected machine to the Core for an incremental snapshot.
Enter the amount of time you want to lapse before a timeout occurs during a read/write event. Uses HH:MM:SS format.
NOTE: The default setting is 0:05:00 or five minutes.
Connection UI timeout
Controls the timeout for the connection between the graphic user interface and the Rapid Recovery Core service across http.
Enter the amount of time you want to lapse before a connection UI timeout occurs. Uses HH:MM:SS format.
NOTE: The default setting is 0:05:00 or five minutes.
Read/Write UI timeout
Controls the timeout for the connection for reading and writing data streams between the graphic user interface and the Rapid Recovery Core service across http.
Enter the amount of time you want to lapse before a timeout occurs during read or write events. Uses HH:MM:SS format.
NOTE: The default setting is 0:05:00 or five minutes.
- For each setting, when satisfied with your changes, click