QoreStor 7.5.0 - Azure Deployment Guide

Chatta subito con l'assistenza

Note: this command will temporarily stop QoreStor services while running, and resume them once EDM support is enabled.

Component / Function	Ports used	Protocol	Details	Default Network Security Group setting in Azure
SSH	22	TCP	SSH uses port 22. We recommend keeping this port open to enable secure connections within and from outside QoreStor.	22: ENABLE
UI	5233	TCP	QoreStor uses 5233 for HTTPS connections (and not 443). Since this connection is secure, the port remains open in default NSG settings for all incoming traffic.	5233: ENABLE
Object (S3)	9001-9005	TCP	Object container uses port range 9001-9005 for data transfer. By default, NSG disables these ports. However, to use the Object container, enable the ports in NSG.	9001-9005: DISABLE
Secure Connect	9443	ANY	Port used by secure connect. Secure connect is enabled by default and we recommend keeping this port open in NSG settings.	9443: ENABLE
Veeam EDM	6160, 6162	TCP	Ports are used by Veeam Deployment service and Veeam Transport service. We do not recommend opening these ports in the NSG unless Veeam EDM support is desired.	6160, 6162: DISABLE

NOTE: Any modification to this NSG will change the default settings recommended by QoreStor.

When opening an additional port, to add inbound rules for that specific port, click Inbound security rules on the left side, and then click the Add tab on the top side of the page.

Option	Description
Source	Select an IP or an Azure NSG. If the port can be used from any external interface, select Any.
Source port ranges	Select a port range on the specified source. To select any range, select *.
Destination	Leave as the default selection, Any.
Service	Leave as the default selection, Custom.
Destination port ranges	(Required) Enter 9001-9005 for this port.
Protocol	Select TCP.
Action	Select Allow.
Priority	Select an appropriate priority. The rules are executed by priority, with the lowest number representing the highest priority. When selecting priorities, leave spaces between the numbers so that you can insert new priorities later.
Name	Enter an appropriate name for this rule; for example, ObjectServer_9001, which highlights the port number and the functionality. Add a description as needed.