Run the Setup.exe file included with the Recovery Manager for Active Directory installation package, and follow the instructions in the Setup Wizard.
To install Recovery Manager for Active Directory with default parameters (this includes installing the Management Shell component), click Express, and then follow the provided instructions to complete the Setup Wizard.
You can open the Management Shell by using either of the following procedures. Each procedure loads the Recovery Manager for Active Directory Management Shell snap-in into Windows PowerShell®. If you do not load the Recovery Manager for Active Directory Management Shell snap-in before you run a command (cmdlet) provided by that snap-in, you will receive an error.
Note |
Verify that the user account under which you run Recovery Manager for Active Directory Management Shell console has the Write permission to the %ProgramData%\Quest\Recovery Manager for Active Directory folder. Otherwise, you will get warning messages when you run the snap-in cmdlets. |
Start Windows PowerShell®.
You can do so by running the powershell command at a command prompt (Cmd.exe).
At the Windows PowerShell® prompt, enter the following command: Add-PSSnapin Quest.RecoveryManager.AD.*
Alternatively, you can complete the following steps related to your version of Windows:
On the Start screen, click the Management Shell tile.
Upon the shell start, the console may present you with a message stating that a certain file published by Quest® is not trusted on your system. This security message indicates that the certificate the file is digitally signed with is not trusted on your computer, so the console requires you to enable trust for the certificate issuer before the file can be run. Press either R (Run once) or A (Always run). To prevent this message from appearing in the future, it is advisable to choose the second option (A).
The Recovery Manager for Active Directory Management Shell uses the Windows PowerShell® help cmdlets to assist you in finding the appropriate information to accomplish your task. The following table provides some examples of how to use the Get-Help and Get-Command cmdlets to access the help information that is available for each cmdlet in the Recovery Manager for Active Directory Management Shell.
When you use Get-Help without any parameters, you are presented with basic instructions on how to use the help system in Windows PowerShell®, including Help for the Recovery Manager for Active Directory Management Shell.
When you use Get-Help with the name of a cmdlet as an argument, you are presented with the help information for that cmdlet. For example, to retrieve the help information for the Get-RMADCollection cmdlet, use the following command:
Get-Help Get-RMADCollection
Get-Command without any parameters lists all the cmdlets that are available to the shell. You can use the Get-Command cmdlet with the Format-List or Format- Table cmdlet to provide a more readable display. For example, use Get-Command | Format-List to display the output in a list format. To display a list of all the Recovery Manager for Active Directory Management Shell cmdlets that are available to the shell, use the following syntax:
Get-Command *RMAD*
When you use Get-Command with the name of a cmdlet as an argument, you are presented with information about the parameters and other components of that cmdlet. The <Cmdlet>
entry allows for wildcard character expansion. For example, to retrieve information about the cmdlets with the names ending in Member, you can use the following command:
Get-Command *Member
Cmdlet | Description |
---|---|
Add-RMADBackup | Registers a backup in the Recovery Manager database. |
Add-RMADCollectionItem | Adds a new item to a Computer Collection. |
Add-RMADReplicationConsole | Adds a RMAD console as a replication source. |
Add-RMADStorageServer | Adds a secure storage server, optionally remotely installs a storage server agent. |
Backup-RMADCollection | Backs up an existing computer collection. |
Compare-RMADObject | Compares Active Directory objects. This cmdlet requires Windows PowerShell to be started using a multi-threaded apartment (MTA). |
Convert-RMADBackup | Converts Windows Server backups into RMAD Bare Metal Recovery backups. |
ConvertTo-RMADRecycledObject | Recycles specific deleted Active Directory objects. |
Create-RMADStorageAgentSetup | Creates storage server agent setup. |
Expand-RMADBackup | Extracts the contents of a specified backup file. |
Export-RMADBackup | Exports registration information for a backup into an .xml file. |
Export-RMADSecureStorageBackup | Exports a backup on a Secure Storage server to a remote network share. |
Export-RMADStorageServers | Exports secure storage servers in CSV file. |
Get-RMADBackup | Gets backups registered with Recovery Manager. |
Get-RMADBackupAgent | Retrieves objects that represent Recovery Manager Backup Agents, or discovers manually preinstalled Recovery Manager Backup Agents. |
Get-RMADBackupInfo | Gets the content of the backups held at a specified location. |
Get-RMADBackupObject | Get objects from backups |
Get-RMADBackupSecurityStatus | Gets security check information for a specified backup. |
Get-RMADCollection | Retrieves Recovery Manager computer collection objects or default computer collection settings. |
Get-RMADCollectionItem | Retrieves information about items contained in specified Recovery Manager for Active Directory computer collections. |
Get-RMADDeletedObject | Retrieves deleted Active Directory objects. |
Get-RMADGlobalOptions | Sets global settings for the application. |
Get-RMADHybridRecoveryDomainOptions | Gets the domain systems associated with the Hybrid Connector. |
Get-RMADHybridRecoveryOptions | Gets the information related to the Hybrid Connector. |
Get-RMADLicenseInfo | Retrieves information about the installed license key file. |
Get-RMADObject | Retrieves specific objects from Active Directory or certain backups registered with Recovery Manager for Active Directory. |
Get-RMADReplicationConsole | Gets all the RMAD consoles in the replication console list. |
Get-RMADReplicationSchedule | Allows you to get the replication schedule from a specified computer. |
Get-RMADReplicationSession | Retrieves information about replication sessions. |
Get-RMADReplicationSessionItem | Retrieves a list of remote consoles that are involved in the specified replication session. |
Get-RMADReportObject | Retrieves an object representing the online comparison or restore operation item. |
Get-RMADReportObjectAttributes | Retrieves an object representing the online comparison or restore operation item attributes. |
Get-RMADReportObjectChildren | Retrieves an object representing the online comparison or restore operation item child items. |
Get-RMADReportSession | Retrieves an object representing the online comparison or restore operation report. |
Get-RMADSession | Retrieves an object representing Recovery Manager backup sessions. |
Get-RMADSessionItem | Gets items from a specified backup creation session. |
Get-RMADSessionItemEvent | Gets events from a specified backup creation session item. |
Get-RMADStorageServer | Returns a list of registered secure storage servers. |
Import-RMADBackup | Reads the backup registration information from the .xml file and returns backup descriptions in the BackupInfo objects. |
Install-RMADBackupAgent | Installs Recovery Manager Backup Agent on a specified computer or on each computer in a particular Computer Collection. |
New-RMADCollection | Creates a new computer collection. |
New-RMADSchedule | Creates a schedule for the backup creation operation you want to perform on a particular computer collection. |
Protect-RMADSecureStorageServer | Enables storage server hardening. |
Publish-RMADBackupSecurityStatus | Publishes security check information for a specified backup. |
Refresh-RMADStorageServer | Refreshes current information of the secure storage server. |
Register-RMADSecureStorageBackups | Registers backups on an existing secure storage server in a Recovery Manager database. |
Remove-RMADBackup | Allows you to selectively unregister backups from the Recovery Manager backup registration database. |
Remove-RMADBackupAgent | Removes Recovery Manager Backup Agent from a specified computer, or its registration information from the Recovery Manager Console. |
Remove-RMADCollection | Deletes specified Computer Collections. |
Remove-RMADCollectionItem | Removes items from a specified Computer Collection. |
Remove-RMADReplicationConsole | Removes an RMAD console from the replication console list. |
Remove-RMADReplicationSchedule | Allows you to remove the replication schedule from a specified computer. |
Remove-RMADReplicationSession | Deletes replication sessions from the replication history. |
Remove-RMADSession | Allows you to selectively delete specified Recovery Manager backup session(s). |
Remove-RMADStorageServer | Removes the secure storage server. |
Remove-RMADUnpackedComponent | Allows you to delete components (data) unpacked from specified backups. |
Rename-RMADCollection | Renames a computer collection. |
Restore-RMADDeletedObject | Restores deleted Active Directory objects. This cmdlet requires Windows PowerShell to be started using a multi-threaded apartment (MTA). |
Restore-RMADDomainController | Restores a domain controller from backup. |
Restore-RMADObject | Restores Active Directory objects from a backup. This cmdlet requires Windows PowerShell to be started using a multi-threaded apartment (MTA). |
Set-RMADCollection | Sets properties for a computer collection. |
Set-RMADGlobalOptions | Sets global application settings |
Set-RMADHybridRecoveryDomainOptions | Sets the domain systems associated with the Hybrid Connector. |
Set-RMADHybridRecoveryOptions | Sets the domain systems associated with the Hybrid Connector. |
Set-RMADReplicationConsole | Sets replication properties of consoles in the replication console list. |
Set-RMADReplicationSchedule | Sets replication schedules for a computer. |
Start-RMADHybridRecoveryDiscovery | Start the Hybrid Recovery Discovery to update the database with a new domain discovered via the backup. This cmdlet is "for internal use only". |
Start-RMADReplication | Performs replication from other computers in the replication console list. |
Start-RMADReportViewer | Displays a report about the results of the online comparison or restore operation. |
Test-RMADBackup | Checks the integrity of backups registered with Recovery Manager. |
Test-RMADSecureStorageBackup | Checks the integrity of a backup on the secure storage server. |
Update-RMADBackupAgent | Upgrades Recovery Manager Backup Agent on a specified computer or on each computer in a particular Computer Collection. |
Update-RMADLicense | Updates license key file. |
Cmdlet | Description |
---|---|
Add-RMADFECloudStorage | Registers a cloud storage in the Recovery Manager for Active Directory database, allowing backups to be copied to cloud storage. |
Backup-RMADFEConsoleConfiguration | Runs console configuration backup. |
Close-RMADFEProject | Closes currently opened recovery project. |
Export-RMADFECloudStorageBackup | Download a backup file from cloud storage and save it locally. |
Export-RMADFECloudStorageServers | Exports cloud storage servers in CSV file. |
Export-RMADFERecoveryCertificate | Exports Forest Recovery certificates. |
Export-RMADFEResult | Export the verification result of an RMADFE project. |
Get-RMADFEAvailableSubnet | For internal use only. |
Get-RMADFECloudStorage | Returns cloud storage registered in Recovery Manager for Active Directory. |
Get-RMADFECloudStorageCollection | Returns computer collections for the cloud storage registered in Recovery Manager for Active Directory. |
Get-RMADFECloudStorageUploadSession | Retrieves the cloud storage upload session details. |
Get-RMADFEComputer | Retrieves a list of computer settings from the current RMADFE project. |
Get-RMADFEConsole | Gets all registered RMAD FE consoles. |
Get-RMADFEConsoleConfigurationBackupSchedule | Returns console configuration backup schedule. |
Get-RMADFEDnsCache | Returns cached DNS records in the Forest Recovery project. |
Get-RMADFEDomain | Retrieves the domain settings. |
Get-RMADFEEvent | Returns recovery events related to the entire Active Directory forest or a specific domain controller. |
Get-RMADFEGlobalOptions | Gets global application settings. |
Get-RMADFEOperation | Returns information about the progress of the recovery operations. |
Get-RMADFEPersistenceConnection | Gets persistence connection settings. |
Get-RMADFEProject | Gets the current status of the RMADFE project. |
Get-RMADFERecoveryAgent | Returns information about Forest Recovery Agents that are installed and registered in Forest Recovery Console. |
Get-RMADFESchedule | Gets a schedule for the RMADFE project verification. |
Import-RMADFERecoveryCertificate | Imports Forest Recovery certificates. |
Install-RMADFERecoveryAgent | Installs Forest Recovery Agent on a specified domain controller or on each domain controller in the forest. |
New-RMADFEProject | Creates a new RMADFE project in the file system. |
New-RMADFERecoveryMedia | Creates a new Recovery Media ISO in the file system. |
Open-RMADFEProject | Opens the RMADFE project. |
Remove-RMADFECloudStorage | Removes a registered cloud storage from Recovery Manager for Active Directory. |
Remove-RMADFECloudStorageUploadSession | Removes an existing cloud storage upload session. |
Remove-RMADFERecoveryAgent | Removes Forest Recovery Agent from a specified domain controller, or its registration information from Forest Recovery Console. |
Remove-RMADFESchedule | Removes an existing verification schedule for the RMADFE project. |
Restart-RMADFECloudStorageUploadSession | Restart a failed or canceled cloud storage upload session. |
Restore-RMADFEConsoleConfiguration | Restores console configuration from backup. |
Resume-RMADFEOperation | Resumes paused recovery process operation. |
Resume-RMADFERecovery | Resumes recovery process. |
Save-RMADFEProject | Saves the RMADFE project. |
Send-RMADFEBackupToSecureStorage | Copies a backup from a local storage or a network share to the secure storage server. |
Set-RMADFECloudStorage | Updates cloud storage in the Recovery Manager. |
Set-RMADFECloudStorageCollection | Configure a computer collection to use a registered cloud storage. |
Set-RMADFEComputer | Applies computer settings to the RMADFE project. |
Set-RMADFEConsoleConfigurationBackupSchedule | Sets console configuration schedule. |
Set-RMADFEDnsCache | Updates cached DNS records in the Forest Recovery project. |
Set-RMADFEDomain | Sets the domain settings for the current RMADFE project. |
Set-RMADFEGlobalOptions | Sets global settings for recovery projects. |
Set-RMADFEPersistenceConnection | Sets persistence connection settings. |
Set-RMADFERecoveryMode | Sets recovery mode for the current recovery project |
Set-RMADFESchedule | Applies settings to the verification schedule for the RMADFE project. |
Start-RMADFERecovery | Performs the restore operation for the RMADFE project. |
Start-RMADFERecoveryAgentOperation | Starts the agent operation on the remote machine where Forest Recovery agent is installed. |
Start-RMADFEVerification | Performs verification of the RMADFE project. |
Stop-RMADFECloudStorageUploadSession | Cancel queued or running cloud storage upload session. |
Stop-RMADFEWorkflow | Stops the verification or recovery workflow of the recovery project. |
Update-RMADFEProject | Shows the difference between the current project and live Active Directory and updates the project. |
Cmdlet | Description |
---|---|
Add-RMADStorageServerException | Adds a new exception to secure storage hardening policy |
Get-RMADStorageServerAllowedVolumes | Gets the volumes allowed for storing backups on a Secure Storage server. |
Get-RMADStorageServerException | Lists current secure storage hardening exceptions. |
Get-RMADStorageServerHardeningStatus | Retrieves the hardening status of the current server. |
Get-RMADStorageServerRetentionPolicy | Retrieves the retention policy status of the current server. |
Protect-RMADStorageServer | Enable storage server hardening. |
Remove-RMADStorageServerException | Removes secure storage server exception |
Set-RMADStorageServerAllowedVolumes | Sets the list of volumes that the Secure Storage server will use for storing new backup files. |
Set-RMADStorageServerRetentionPolicy | Sets the retention policy status of the current server. |
Unprotect-RMADStorageServer | Disables hardening on the storage server. |
© ALL RIGHTS RESERVED. Feedback Termini di utilizzo Privacy Cookie Preference Center