external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Applies computer settings to the RMADFE project.
Set-RMADFEComputer [-ComputerName] <String> [-Domain <String>] [-Backup <Guid>] [-BmrBackup <Guid>]
[-BackupPassword <SecureString>] [-BmrBackupPassword <SecureString>] [-LocalCredential <PSCredential>]
[-DcCredential <PSCredential>] [-DsrmCredential <PSCredential>] [-NetworkShareCredential <PSCredential>]
[-BmrBackupNetworkShareCredential <PSCredential>] [-UseDomainSettings <Boolean>]
[-RecoveryMethod <RecoveryMethod>] [-RestoreSysvolFromBackup <Boolean>] [-InstallFromMedia <Boolean>]
[-DitPath <String>] [-LogPath <String>] [-SysvolPath <String>] [-RestoreAdOverBmrBackup <Boolean>]
[-WipeDisks <Boolean>] [-PerformMalwareScan <Boolean>] [-DsrmPause <Boolean>]
[-UseOriginalTargetNetworkSettings <Boolean>] [-UseNatRouter <Boolean>] [-NatRouterPort <UInt32>]
[-NatRouterAddress <String>] [-TargetIpAddress <String>] [-IsoIpAddress <String>] [-SubnetMask <String>]
[-DefaultGateway <String>] [-DnsServers <String>] [-ConfigureAsGlobalCatalog <Boolean>]
[-InstallReadOnly <Boolean>] [-RecoveryMediaPath <String>] [-RecoveryMediaShareCredential <PSCredential>]
[-SaveRecoveryMediaOnBackupShare <Boolean>] [-TargetHardwareType <TargetInfrastructureType>]
[-TargetHardwareManagementAddress <String>] [-TargetHardwareManagementProtocol <String>]
[-TargetHardwareManagementPort <Int32>] [-TargetHardwareManagementCredential <PSCredential>]
[-TargetHostCreateVMScript <String>] [-TargetHostBootScript <String>] [-TargetHostEjectScript <String>]
[-CreateVM <Boolean>] [-VMName <String>] [-VMCPUNum <Int32>] [-VMMemorySize <Int64>]
[-HypervisorHost <String>] [-HypervisorHostPlacement <String>] [-HypervisorNetwork <String>]
[-VMNetworkName <String>] [-VMNetworkResourceGroup <String>] [-VMFolder <String>] [-VMNetworkRange <String>]
[-VMSubNetworkName <String>] [-VMSubNetworkRange <String>] [-UseVMNetworkGateway <Boolean>]
[-VMNetworkGateway <String>] [-VMVpnAddressPool <String>] [-UseStaticIPAddress <Boolean>]
[-AddPublicIPAddress <Boolean>] [-DriversPath <String>] [-AllowAddCustomDrivers <Boolean>]
[-AllowAddCustomDriversFromBackup <Boolean>] [-TargetHardwareBootScript <String>] [-SubscriptionId <String>]
[-TenantId <String>] [-AutoSelectVMSize <Boolean>] [-VMSize <VMSize>] [-VMLocation <String>]
[-VMResourceGroup <String>] [-VMSecurityGroupName <String>] [-VMSecurityGroupResourceGroup <String>]
[-VMStorageType <String>] [-VMStorageSize <Int32>] [-VMStorageSizeMode <VMStorageSizeMode>]
[-DeleteVMAfterVerify <Boolean>] [-DeleteInfrastructureAfterVerify <Boolean>] [-OverwriteExistingVM <Boolean>]
[-KeepInProject <Boolean>] [-InstallDnsServer <Boolean>] [<CommonParameters>]
This cmdlet applies computer settings to the current RMADFE project.
PS C:\> $dcCreds = Get-Credential
$dsrmCreds = Get-Credential
$shareCreds = Get-Credential
Set-RMADFEComputer -Name dc1.acme.com -BackupPassword (ConvertTo-SecureString "pwd" -AsPlainText -Force) -DcCredential $dcCreds -DsrmCredential $dsrmCreds -NetworkShareCredential $shareCreds -UseDomainSettings $false
This command applies the specified settings to the dc1.acme.com computer.
PS C:\> $shareCreds= Get-Credential
$dcCreds = Get-Credential
$dsrmCreds = Get-Credential
$localCreds = Get-Credential
Set-RMADFEComputer -Name dc1.acme.com -NetworkShareCredential $shareCreds -DcCredential $dcCreds -DsrmCredential $dsrmCreds -LocalCredential $localCreds -RecoveryMethod InstallAD -InstallFromMedia $true
This command applies the specified settings to the dc1.acme.com computer, and installs AD using media.
Specifies if public IP address should be assigned to the virtual machine.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Turns on the ability to set up custom drivers.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Turns on the ability to set up custom drivers from the backup.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if VM size should be selected automatically.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a System State backup that is used for recovery.
Type: Guid
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the password to access a password-protected backup.
Type: SecureString
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a Bare Metal Recovery backup that is used in case of the Bare Metal Active Directory Recovery method.
Type: Guid
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access the selected domain controllers to the BMR backup location. Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the password to access a password-protected BMR backup.
Type: SecureString
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the fully qualified domain name of the computer.
Type: String
Parameter Sets: (All)
Aliases: Name
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets the Global Catalog role for the domain controller.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if a new machine must be created on the target platform.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access the selected domain controllers in the Normal mode. Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the default gateway for the custom Bare Metal Recovery network settings.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if infrastructure (security group, virtual network, virtual network gateway) must be deleted after project verification.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if a virtual machine must be deleted after project verification.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a path to the DIT file if the custom location is required.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies DNS Servers for the custom Bare Metal Recovery network settings.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the Domain DNS name of the computer.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a path to custom drivers.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access the selected domain controllers in Directory Services Restore Mode (DSRM). Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if the recovery process must be paused in DSRM to perform additional actions before rebooting to normal mode.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies Hypervisor host name.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the placement of the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the hypervisor network of the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if DNS server will be installed when using Install Active Directory or Install Active Directory from Media recovery method.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option allows you to install or reinstall AD using media.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Sets Read-only property for the domain controller.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the IP address for ISO image which is used as a boot disk.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Marks domain controller to be recovered later. If this domain controller is removed from the Active Directory®, it will not removed from the project on updating with Active Directory® changes.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies local credentials for the computer.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a path to Active Directory® log files if the custom location is required.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Set the NAT routing address (deprecated).
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Set the NAT routing port (deprecated).
Type: UInt32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access the selected domain controllers to the backup location. Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if an existing machine must be deleted before creation.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if the backup must be scanned with Microsoft Defender Antivirus during project verification.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a path to ISO image which is used as a boot disk.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies credentials to get access to ISO image which is used as a boot disk.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the recovery method for this domain controller.
Type: RecoveryMethod
Parameter Sets: (All)
Aliases:
Accepted values: DoNotRecover, RestoreFromBackup, ReinstallAD, AdjustADChanges, UninstallAD, RestoreSYSVOL, InstallAD, RestoreFromWindowsBackup, RestoreOnCleanOS, Skip
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option allows you to select the RMADFE Active Directory and Registry backup to be restored over the BMR backup.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
{{ Fill RestoreSysvolFromBackup Description }}
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a location of the ISO image which is used as a boot disk.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a subnet mask for the custom Bare Metal Recovery network settings.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure SubscriptionId.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a path to SYSVOL if the custom location is required.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies custom script to boot the target host.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the address of the target platform for the new domain controller.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies network credentials for communicating with the platform for the new domain controller.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the network port for communicating with the platform for the new domain controller.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the network protocol for communicating with the platform for the new domain controller.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the target platform for the new domain controller.
Type: TargetInfrastructureType
Parameter Sets: (All)
Aliases:
Accepted values: None, PhysicalDell, PhysicalHP, Custom, VMWare, HyperV, Azure, AWS
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a custom script to boot the target host.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a custom script to create a virtual machine on the target platform.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a custom script to eject bootable disk on the target host.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the target IP for the computer.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure TenantId.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option lets you use the default domain credentials to access domain controllers.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows using NAT (deprecated).
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option allows you to use network settings from Bare Metal Recovery backup.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if static IP address should be assigned to the virtual machine.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if VPN Gateway should be used to connect the virtual machine.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the number of CPUs on the virtual machine.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a target folder for the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure VM location.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies memory size on the virtual machine.
Type: Int64
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the name of the virtual machine on the target platform.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies VPN Gateway used to connect the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies virtual network name for the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies network range for the virtual network.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies virtual network resource group name for the virtual machine.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure VM resource group.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure VM security group name.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure VM security group resource group name.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies an Azure VM size.
Type: VMSize
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the virtual machine disk size in GB. Applicable with VMStorageSizeMode = SetVMStorageSize.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the virtual machine disk size selection mode. UseDefaultVMStorageSize - set disk size based on the Active Directory data size. SetVMStorageSize - set custom disk size. Minimal disk size values are 128 GB for OS disk and 8 GB for AD data disk.
Type: VMStorageSizeMode
Parameter Sets: (All)
Aliases:
Accepted values: UseDefaultVMStorageSize, SetVMStorageSize
Required: False
Position: Named
Default value: UseDefaultVMStorageSize
Accept pipeline input: False
Accept wildcard characters: False
Specifies the virtual machine storage type.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies subnetwork name for the virtual network.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies subnetwork range for the virtual network.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies virtual machine address pool.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if a full disk cleanup on the target machine is required before starting restore from the Bare Metal Recovery backup.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets console configuration schedule.
Set-RMADFEConsoleConfigurationBackupSchedule -ProjectFilesFolder <String> -Path <String>
-PathAccessCredential <PSCredential> -SecureStorageServer <String> -CloudStorage <String>
-BackupPassword <SecureString> -ScheduleAccount <PSCredential> -Schedule <Schedule> [<CommonParameters>]
Sets console configuration schedule triggers, schedule account, target backup path and password.
PS C:\> $schedule = New-RMADSchedule -Daily -StartDate ((Get-Date).AddHours(1)) -DaysInterval 1
Set-RMADFEConsoleConfigurationBackupSchedule -Path \\BackupServer\c$\ConsoleConfig.zip -Password $password -ScheduleAccount $adminCredentials -Schedule $schedule
Sets new console configuration schedule to run backup daily to BackupServer share with given password.
Backup password.
Type: SecureString
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Cloud storage name to save backup on.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Path to use when creating backup by schedule.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credential used to access the target path.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Path to the directory containing Forest Recovery project files that are needed to be backed up.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Schedule triggers
Type: Schedule
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Account that will be used to run schedule task.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Secure storage name to save backup on.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Updates cached DNS records in the Forest Recovery project.
Set-RMADFEDnsCache [-HostName] <String> [-Address] <Object> [-Override] [<CommonParameters>]
This cmdlet updates the cached DNS records for the specified hostname in the Forest Recovery project.
PS C:\> Set-RMADFEDnsCache -HostName DC1.rmad.local -Address "192.168.0.2"
This command prepends "192.168.0.2" to the cached DNS records of DC1.rmad.local.
PS C:\> Set-RMADFEDnsCache -HostName DC1.rmad.local -Address @("192.168.0.2","10.0.0.2")
This command prepends "192.168.0.2" and "10.0.0.2" to the cached DNS records of DC1.rmad.local.
PS C:\> Set-RMADFEDnsCache -HostName DC1.rmad.local -Address "192.168.0.2" -Override
This command resets the cached DNS records of DC1.rmad.local to "192.168.0.2".
Specifies a list of IP addresses for the specified hostname.
Type: Object
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the hostname of the domain controller.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option lets you reset the cached DNS records to the specified address.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: 2
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Sets the domain settings for the current RMADFE project.
Set-RMADFEDomain [-Domain] <String> [-Recover <Boolean>] [-AuthoritativeSysvolRestoreComputer <String>]
[-ResetPasswords <Boolean>] [-Groups <System.Collections.Generic.List`1[System.String]>]
[-Exclusions <System.Collections.Generic.List`1[System.String]>] [-PerformMalwareScan <Boolean>]
[-DsrmPause <Boolean>] [-RunDsrmScriptAction <RunScriptDsrmAction>]
[-QuarantineSysvolFilesAction <QuarantineFilesDsrmAction>]
[-DoNotRecoverSysvolFilesAction <DoNotRecoverFilesDsrmAction>] [<CommonParameters>]
Set-RMADFEDomain [-Domain] <String> [-Recover <Boolean>] [-AuthoritativeSysvolRestoreComputer <String>]
-DcCredential <PSCredential> -DsrmCredential <PSCredential> -LocalCredential <PSCredential>
[-ResetPasswords <Boolean>] [-Groups <System.Collections.Generic.List`1[System.String]>]
[-Exclusions <System.Collections.Generic.List`1[System.String]>] [-PerformMalwareScan <Boolean>]
[-DsrmPause <Boolean>] [-RunDsrmScriptAction <RunScriptDsrmAction>]
[-QuarantineSysvolFilesAction <QuarantineFilesDsrmAction>]
[-DoNotRecoverSysvolFilesAction <DoNotRecoverFilesDsrmAction>] [<CommonParameters>]
This cmdlet sets the domain settings for the current RMADFE project.
PS C:\> $dcCreds = Get-Credential
$dsrmCreds = Get-Credential
Set-RMADFEDomain -Domain acme.com -Recover $true -AuthoritativeSysvolRestoreComputer dc1.acme.com -DcCredential $dcCreds -DsrmCredential $dsrmCreds
This command applies the domain settings to the acme.com domain.
Set-RMADFEDomain acme.com -ResetPasswords $true -Groups Group_A, Group_B, Group_C -Exclusions User_01, User_02
This command enables password resetting for domain users in the following privileged groups: Group_A, Group_B, and Group_C in the domain acme.com, except User_01 and User_02.
$action = (Get-RMADFEDomain -Domain acme.com).QuarantineSysvolFilesAction
$action.IsEnabled = $true
$action.MaliciousFiles = $false
$action.SpecifiedFiles = $true
$action.Filters = @("*.exe")
$action.Exclusions = @("*\scripts\config\setup\*")
$action.RenameFiles = $true
$action.RenameSuffix = "_INFECTED"
$action.MoveFiles = $false
Set-RMADFEDomain -Domain acme.com -QuarantineSysvolFiles $action
This command configures an action for domain acme.com to rename files with extension .exe in SYSVOL, except for files located in folder \scripts\config\setup.
$action = (Get-RMADFEDomain -Domain acme.com).DoNotRecoverSysvolFilesAction
$action.IsEnabled = $true
$action.MaliciousFiles = $true
$action.SpecifiedFiles = $false
Set-RMADFEDomain -Domain acme.com -DoNotRecoverSysvolFiles $action
This command configures an action for domain acme.com to skip restoring files in SYSVOL that were identified as malicious during an antivirus scan.
$action = (Get-RMADFEDomain -Domain acme.com).RunDsrmScriptAction
$action.IsEnabled = $true
$action.Script = Get-Content "C:\Scripts\ProcessSysvolFiles.ps1"
Set-RMADFEDomain -Domain acme.com -RunDsrmScriptAction $action
This command configures a PowerShell® script for domain acme.com to run in DSRM after restoring domain controllers from a backup.
This option allows you to configure the domain controller where the authoritative restore of SYSVOL will be performed.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access domain controllers in the selected domain in the Normal mode. Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: IncludeCredentials
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the fully qualified domain name.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies which SYSVOL files should not be recovered when restoring data from a backup.
Type: DoNotRecoverFilesDsrmAction
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the user name and the password with which you want Recovery Manager for Active Directory Forest Edition to access domain controllers in the selected domain in Directory Services Restore Mode (DSRM). Use the Get-Credential cmdlet provided by Windows PowerShell® to get the PSCredential object representing user credentials.
Type: PSCredential
Parameter Sets: IncludeCredentials
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if the recovery process must be paused in DSRM to perform additional actions before rebooting to normal mode.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This parameter specifies one or more users (separated by commas). By default, only the domain administrator configured in your project settings is excluded from password resetting. When this parameter is specified, both the administrator and the specified user(s) are excluded.
Type: System.Collections.Generic.List`1[System.String]
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This parameter specifies one or more groups of users (separated by commas). When this parameter is specified, this command ONLY resets the password for the specified groups of users in the domain instead of the predefined administrative accounts.
Type: System.Collections.Generic.List`1[System.String]
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies local credentials for the machine.
Type: PSCredential
Parameter Sets: IncludeCredentials
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies if the backup must be scanned with Microsoft Defender Antivirus during project verification.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies which SYSVOL files should be quarantined when restoring data from a backup.
Type: QuarantineFilesDsrmAction
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This option lets you include the domain into or exclude the domain from the current RMADFE project.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This parameter resets the password for administrative accounts in the domain during forest recovery, including members of Enterprise Admins, Domain Admins, Administrators, Account Operators, Schema Admins, Group Policy Creator Owners, Backup Operators, Server Operators, and Print Operators.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies a PowerShell script to run on a domain controller after restoring Active Directory data from a backup.
Type: RunScriptDsrmAction
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Termini di utilizzo Privacy Cookie Preference Center