NetVault Bare Metal Recovery 12.5 - User Guide for Plug-ins

“NetVault Bare Metal Recovery ISO Builder for Plug-in Offline Client for Windows” file — on the Quest NetVault Backup Installation CD or downloaded from the Quest website

•

A writable DVD and CD drive

•

A blank DVD and CD

•

DVD- and CD-generation software


	NOTE: Quest recommends that you shut down all applications running on this machine before starting this procedure

Download the Windows ADK for Windows 8 from: http://www.microsoft.com/en-us/download/details.aspx?id=30652

Install the Windows ADK on a Windows Server 2008 R2 or later system.

You can use the default directory, C:\Program Files (x86)\Windows Kits\8.0, or a different directory of your choosing.


	IMPORTANT: Installation of Windows ADK also installs Microsoft .NET Framework if it is not already installed. After .NET Framework is installed, the system is automatically restarted.

Extract the “NetVault Bare Metal Recovery ISO Builder for Plug-in Offline Client for Windows” file to the Windows ADK machine.

This step creates two files, “nvbmrisocreate.exe” and “nvbmriso.pkg.”

Verify that the path to where you intend to create the ISO image exists.

If the directory does not exist when you run the next step, the ISO image is not created.

To create the Windows PE ISO image, navigate to the directory that contains the extracted “nvbmrisocreate.exe” file, type the following at the command prompt, and press Enter:

The following list describes what you can specify for each option:

•

/TYPE: If you are working with an earlier version of the Plug-in Offline Client, enter WAIK. If you are using version 6.1 or later, you can enter ADK.

•

/PKG: Enter the full path and filename for the Plug-in Offline Client .pkg file that you downloaded separately.

•

/DIR: Enter the full path to the location of the Windows AIK or ADK directory.

•

/OUT: Enter the path where the bootable ISO image should be created.

•

/ADDDRV: Enter the full path where the downloaded device drivers are stored.

•

/BIT:32: If you must create a backward-compatible version of VaultOS for use with a 32-bit version of Windows PE, enter this option.

Example:

nvbmrisocreate /TYPE:ADK

/PKG:"<pathToFile>\nvbmriso.pkg"

/DIR:"C:\Program Files (x86)\Windows Kits\8.0"

/OUT:"C:\temp\bmr.iso"

/ADDDRV:"C:\Program Files\Down Load Drivers\"

Insert a blank CD in the writable drive.

Create a CD with CD-generation software using the “bmr.iso” file generated in Step 5.

Installing VaultOS on a writable CD for use with Plug-in Live Client for Windows

The VaultOS ISO image lets you create a bootable CD that can be used to prepare a Client machine for the restore process. This procedure can be performed on any machine that meets the following requirements:

The following items are required for this procedure:

•

VaultOS ISO image, either from the installation CD or obtained through download

•

A writable CD drive

•

A blank CD

•

CD-generation software

To create the CD, perform the following steps.


	NOTE: Quest recommends that you shut down all applications running on this machine before starting this procedure

Based on installation type installation CD or downloaded file), navigate to the following directory:

…\<OperatingSystem>\vaultdr\vaultos

Locate the CD image file entitled “vaultos_x86_vxxx.iso” where xxx indicates the VaultOS software version.

If you are using an installation CD, copy it to the machine’s local hard drive. Otherwise, note the directory path to this file.

Insert a blank CD in the writable drive.

Create a CD with the CD-generation software using the “vaultos_x86_vxxx.iso” file.

For details on this procedure, see the relevant documentation for the CD-generation software in use.

Adding a NetVault Bare Metal Recovery Client to the Plug-in Server for use with Plug-in Live Client for Windows

To access a NetVault Bare Metal Recovery Client machine correctly for backup and restore, add it to the Plug-in Server. After you have added an initial NetVault Bare Metal Recovery Client to the NetVault Backup Server, repeat these steps to add additional clients.

In the Navigation pane of the NetVault Backup WebUI, click Create Backup Job.

Next to the Selections list, click

On the NetVault Backup Selections page, double-click the NetVault Backup Server — with the Plug-in Server installed on it — to open it.

Click the Plug-in Server, labeled “VaultDR APM,” and select Add Client from the context menu.

When the Add Bare Metal Recovery Plug-in Offline Client dialog box is displayed, complete the following fields to add the client:

•

Client Name: The name of the applicable NetVault Bare Metal Recovery Client. NetVault Backup scans the network, looking for available systems that can be added as NetVault Bare Metal Recovery Clients, and displays them in the drop-down list.


	IMPORTANT: The Client Name must be the NetVault Bare Metal Recovery Client name exactly as it is displayed on the NetVault Bare Metal Recovery Client machine. If the Client Name is not the same, restore jobs may fail.

•

Address(es): A comma-separated list of addresses that can either be IP addresses or resolvable network names — for example, 10.55.55.1, Server_1, 10.55.55.2 — that see the machine to add.

•

Port Number: The port used to invoke drdaemon, for example, 15555. The default is 10000.

Click Next.

After the client is successfully added to the server, a message is displayed.

Repeat these steps as required until all NetVault Bare Metal Recovery Clients have been added.

Editing an existing NetVault Bare Metal Recovery Client for use with Plug-in Live Client for Windows

With a NetVault Bare Metal Recovery Client added to the NetVault Backup Server, the settings made during the original addition process can be edited, if necessary.

In the Navigation pane, click Create Backup Job.

Next to the Selections list, click

On the NetVault Backup Selections page, double-click the NetVault Backup Server — with the Plug-in Server installed on it — to open it.

To expand the Plug-in Server icon, labeled “VaultDR APM,” double-click it.

Click the applicable NetVault Bare Metal Recovery Client, and select Edit Client from the context menu.

When the Edit Bare Metal Recovery Plug-in Offline Client dialog box is displayed, update the applicable values:

•

Client Name: This field contains the current name for the selected client. Changing this value updates the name of the NetVault Bare Metal Recovery Client in NetVault Backup.

•

Address(es): This field contains the IP address originally set for this client. You can change this value or add additional, comma-separated addresses.

•

Port Number: This field contains the port used to invoke drdaemon, for example, 15555. The default is 10000.

To close the dialog box and commit the changes, click OK.

Seleziona il prodotto:

Per una maggiore efficacia, compilare l'Obiettivo della chat:

Soluzioni consigliate per il problema

NetVault Bare Metal Recovery 12.5 - User Guide for Plug-ins

Creating a Windows PE-based Boot System for use with Plug-in Live Client for Windows

Installing VaultOS on a writable CD for use with Plug-in Live Client for Windows

Adding a NetVault Bare Metal Recovery Client to the Plug-in Server for use with Plug-in Live Client for Windows

Editing an existing NetVault Bare Metal Recovery Client for use with Plug-in Live Client for Windows