vRanger 7.8.5 - Release Notes

Support for vSphere 8.0 and 8.0.1 for vRanger

Certified to support Windows Server 2022

The vRanger Service does not start after installing vRanger on Windows Server 2008 R2 SP1.

Workaround:

When installing vRanger on Windows Server 2008 R2 SP1, the Windows Management Framework 3.0 must also be installed in order for the vRanger Service to run. Options for installing WMF 3.0 are:

VR-177

When installing or upgrading vRanger on a Micrsoft Windows 2012 R2 Server, the vRanger GUI may fail to launch with following error:

“FileNotFoundException. Could not load file or assembly 'Vizioncore.vRanger.FLR.dll' or one of its dependencies. The specified module could not be found.”

Workaround:

This issue is caused by a corrupted Visual C++ 14.0 installation on the installation server. To resolve this issue

If the Quest vRanger Service is installed with a user other than the currently logged in user, use mixed-mode authentication for SQL Server® and authenticate with the system administrator (sa) user.

Alternatively, Windows®-only authentication can be used if the following workaround is implemented.

Workaround:

17210

When vRanger is installed on Windows 8.1 or Windows Server 2012, using the Uninstall icon to remove the application fails unless the uninstall is performed using the Administrator role.

Workaround 1:

Workaround 2:

You may also uninstall vRanger using the Programs and Features application in the Control Panel.

15470

When a proxy server is configured on the vRanger machine, vRanger may not be able to connect to VMware® vCenter™ Servers or NetVault SmartDisk repositories.

Workaround:

If vRanger is installed using a local admin account, and that account is changed after vRanger is uninstalled, you must use SQL Server authentication for the database installer for both vRanger and Cataloging when you reinstall vRanger.

If the second local admin account does not have access to the database, grant that account administrator access to the SQL Server instance before installation.

16034

Domain controller and domain authentication issues can cause errors such as:

Workaround:

The following lists some common situations that can cause these issues:

15187

When a Backup Group contains two Windows 8.1 or Windows Server 2012 VMs that are clones of each other, and that group is backed up using HotAdd, only one of the cloned machines restores properly.

15112

During periods of heavy activity on the vRanger machine, HotAdd backup tasks may fail over to LAN backups with the following message. Sometimes, the LAN backups fail with the same error.

These errors can be caused by excessive resource contention, which causes vRanger message queues to become out of synch.

Workaround 1:

To avoid task timeout errors, schedule jobs to avoid excessive resource contention on the vRanger machine.

Workaround 2:

If rescheduling jobs is not an option, you may increase the timeout value to allow the vRanger message queues to recover from issues caused by resource contention. To change the timeout value:

When the vCenter User credentials are changed, the change does not take full effect until the Quest vRanger Service is restarted.

17038

In some circumstances, Changed Block Tracking (CBT) does not show as enabled for some VMs in the vRanger inventory. This issue is due to an error described in VMware KB article 2075984.

Workaround:

To resolve this issue, perform the workaround documented in VMware KB article 2075984.

17528

When creating Hyper-V virtual machines, avoid using special characters. The [ ] (square brackets) and ‘ (backtick) specifically should not be used.

When adding a CIFS repository, the Security Protocol setting applies only to Virtual Appliance based operations.

For machine-based operations, the security protocol used is determined by the Windows configuration on the vRanger machine. By default, this is NTLM.

Workaround:

To use NTLMv2, you must edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel to set the LmCompatibilityLevel to 5.

VR-1236

When performing SAN backups of VMs created in VMware® vCloud Director® from a template, the backup may fail with the “Error: 2760 - <VIXcannotOpenDetails> VIX can’t open…” error.

The VMware SAN mode transport searches for VMs by BIOS UUID. By default, all instances and VMs that are deployed from a given catalog vApps/template in vCloud Director are assigned the same BIOS UUID. For more information, see VMware KB article 1002403.

Workaround:

To resolve this issue, perform the workaround documented in VMware KB article 2002506.

17591

When performing a quiesced backup of a Windows Server 2012 VM without using vzShadow.exe, event log errors are generated for System Reserved volumes during snapshot creation.

14130

The VMware QueryChangedDiskAreas API returns incorrect sectors after extending the VM VMDK file with CBT enabled. This issue causes the CBT filter to become invalid, possibly corrupting vRanger backups. For more information, see VMware KB article 2090639.

Workaround:

Ensure that the patches described in VMware KB article 2090639 are applied, and follow other workaround recommendations documented in the KB as appropriate for your environment.

When using the vzShadow.exe executable to perform application-consistent backups, lettered drives are required. The use of vzShadow.exe to quiesce mount points with databases is not supported.

When backing up Windows Server 2008 R2 VMs with multiple disks, and the Enable Guest Quiescing option is selected, some backup tasks may fail with the “API Call failed with message: A general system error occurred: Protocol error from VMX” error.

Workaround:

For options to resolve this issue, see VMware KB article 1037071.

When using a Microsoft Storage Spaces Direct (S2D) cluster as a repository, VA-based HotAdd will fail with error “Error 2258: FATAL cifs_cant_mkdir”.

Workaround:

Add the VA into the same domain as the S2D cluster.

VR-1158

Backup of Hyper-V VHD Sets is not supported by vRanger. While adding the Hyper-V host or Hyper-V Cluster in the vRanger inventory that contains a VM with VHD Sets disk, the Hyper-V host or Hyper-V Cluster gets added but remains in disconnected status.

Workaround:

Remove the VM with the VHDS file from the Hyper-V cluster or host and then try to add the Hyper-V cluster or host to the vRanger inventory.

VR-1365

The use of SAN transport mode is not supported when working with encrypted VMs. This is due to a VMware VDDK limitation documented here.

When vRanger is installed on Windows Server 2019, attempting to perform a FLR on an ReFS volume causes the vRanger machine to crash.

Workaround:

ReFS is not supported as removable media on Windows Server 2019. FLR for ReFS volumes when vRanger is installed on Windows Server 2019 is not supported.

VR-990

When restoring a VM that had an ISO connected when the VM was backed up, the restored VM does not have the ISO connected.

Workaround:

To ensure that ISO images are attached to a VM when restored:

8366

When a standalone ESXi host is added to the vRanger inventory, and that Host is associated with a vSphere® vCenter that is not in the vRanger inventory, restore operations to that host fail with the error:

“<host> is being managed by a Virtual Center. Please disassociate the host from the Virtual Center before continuing a Restore operation or register the Virtual Center in vRanger.”

Association is relationship in vSphere, whereby some host resources are managed only by an associated vCenter, and not the host itself. The Host, therefore, does not have permission to perform the operations required to restore a VM. If the vCenter is not in the vRanger inventory, vRanger cannot obtain the required permissions.

Workaround:

Either disassociate — disconnecting is insufficient — the host from the vCenter, or register the vCenter in vRanger.

When performing a Linux® FLR operation that recovers files and folders with the following characters in the name, the files and folders are displayed with what look to be randomly generated names, and are restored successfully with same random names. Characters that cause this behavior are:

\ : * " ? < > |

The vRanger cataloging feature does not support operation against dynamic disks.

13755

The vRanger Restore CD is not compatible with UEFI. Physical target servers booting into UEFI will not boot the Restore CD.

Workaround:

To restore a backup to a physical server booting into UEFI, change the boot mode to BIOS. To do so, follow the steps below:

VR-422

Physical backup of Windows Server 2012 and 2012 R2 machines may fail with the “Failed to create VSS snapshot (P_VSSUTIL_WRITER_ERR)” message. This issue is often due to a VSS timeout caused by resource contention on the source server.

Workaround:

If possible, adjust the backup schedule so that the backup is performed during a period of lower resource consumption.

16589

When deploying the vRanger physical client to a physical server, the account used to install and run the client must have administrative Log on as a service rights. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.

If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this issue is happening.

For instructions, see the Microsoft TechNet article Add the Log on as a service right to an account.

15278

The use of dynamic disks are not supported for physical backup. If a physical backup task is performed on a source server containing dynamic disks, the task fails with the “Value cannot be null” message.

14470

When restoring to a physical server, vRanger does not lock the source or savepoint. This behavior potentially allows the un-supported practice of creating two simultaneous restore tasks to the same server.

Workaround:

Ensure that you only configure one restore task per server.

14507

When performing physical backups of an Exchange 2010 server, the task fails with the “Failed to create VSS snapshot on the target machine (P_VSSUTIL_WRITER_ERR)” error.

Workaround:

To protect Exchange 2010 with physical backups, install Exchange Server 2010 Service Pack 2 on the source server.

14426

When performing physical backups, if the credentials used for authenticating to the source server are changed without updating vRanger, subsequent backup tasks fail with the “Failed to acquire shared resources (Unable to connect to the backup destination.) Failed to connect to the backup destination” error. When this issue occurs, update the credentials in vRanger.

14712

Successfully replicated encrypted VM with different types of controllers fails to reboot.

VR-1163

The vRanger replication wizard will allow you to create a job replicating from a higher hardware version to a lower hardware version. When executed, the job will fail with error "Error: API Call failed with message: The virtual machine version is not compatible with the version of the host."

VMware ESXi 6.7u2 introduces hardware version 15. This hardware version is incompatible with ESXi versions 6.7u1 or lower. When configuring a replication job from a 6.7u2 host to a host running 6.7u1 or earlier, the VM hardware versions will be incompatible.

Workaround:

Ensure that replication jobs are configured between hosts running the same version of VMware ESXi.

VR-1104

Replication to a target containing vRDM disks is not supported.

16612

When a standalone ESXi host is added to the vRanger inventory, and that Host is associated with a vSphere vCenter not in the vRanger inventory, replication operations to that host fail with the error:

“<host> is being managed by a Virtual Center. Please disassociate the host from the Virtual Center before continuing a replication operation or register the Virtual Center in vRanger.”

Association is a relationship introduced in vSphere 5, whereby some host resources are managed only by an associated vCenter, and not the host itself. The Host, therefore, does not have permission to perform the operations required to replicate a VM. If the vCenter is not in the vRanger inventory, vRanger cannot obtain the required permissions.

Workaround:

Either disassociate — do not simply disconnect — the host from the vCenter, or register the vCenter in vRanger.

When performing a failover operation, without synchronizing changes, and the source host is unavailable, the failover task fails and you must manually perform the failover.

Workaround:

A failover operation performs two key tasks that need to be performed manually if the operation fails: powering on the destination VM, and reversing the direction of replication to ensure that changes to the destination VM are captured when operation reverts to the production site. To replicate a failover task manually, perform the following steps:

When replicating a VM with a name containing a space in front of a bracket, “ [,” the replication task hangs at 12%.

12163

When performing replications, in some cases the scratch disk reconfiguration process may result in the replication job failing with error “The virtual appliance 'VA-Name' has not been configured with a required data disk.”. This is the result of a stale disk on the virtual appliance.

Workaround:

On the vRanger VA, execute the commands

After executing the above commands, reboot the virtual appliance.

VR-1336

When editing a replication job, disk selection for newly added disks is disabled. This is observed only when the disks initially added in the replication job are of a different controller type than the newly added disk.

Workaround:

Create a new replication job with the new disk included.

VR-1376

Deploying a VA to a standalone host fails if the host is managed by a vCenter.

16792

When deploying the vRanger VA using the Virtual Appliance Deployment Wizard, only one VA is allowed per host.

If a second VA deployment is attempted, the VA Deployment Wizard does not let you deploy a VA to a host that has an existing VA.

13606

When creating a VA with the Install-VirtualAppliance vAPI cmdlet, enabling the VADeployStatus parameter may cause failures when used with multiple VAs.

Workaround:

When deploying more than three VAs with the vAPI cmdlets, use the Get-VirtualApplianceDeploymentStatus cmdlet to retrieve the status.

13834

In some environments, it may be necessary for a customer to add a second network interface card (NIC) to the vRanger VA.

When special characters are used in a file or folder name, you cannot see that file or folder when browsing the datastore in vCenter. This issue is documented in more detail in the VMware KB article 1015650.

When creating a Hyper-V backup job, mixing VMs with Cluster Shared Volumes (CSV) and non-CSV volumes is not supported. For more information, see Microsoft KB article 2771882.

Quest has not verified support for protecting Virtual Machines with 'vSAN storage policy and VVOL storage policy' configured together.

Quest has not verified support for vCenter 7.0 using vSAN policies.