If Enterprise Vault was configured to use Enterprise Vault Collections, when migrating a large number of ARCHDVS files, they might be placed on the file system as the Enterprise Vault API extracts the item from the collection file (CAB file). These files can consume considerable space, which may lead to low disk space situations.
Quadrotech Archive Shuttle have produced a tool to assist in this situation. While the issue is one caused by Enterprise Vault, this tool may help the situation.
The utility is able to automatically delete temp files using a few options:
·Using a lightweight Filesystem watcher, where the Application gets notified by the OS that a new file has been created
·Using a periodic scanner, which scans the filesystem each XX minutes
·Using a low disk space threshold
·On program startup
All these options also have a Timeout option, which is a minimum age that a file must have in order for it to be eligible for deletion.
You can register multiple paths, each with its own settings.
|
NOTE: Use with care, and ideally in a test environment first. |
We advise that you use the tool using Log only mode first (you will see this option in the configuration dialog), and then check the log file to see if it is performing as expected.
Usage:
1.Double-click the .exe, and youll get a configuration dialog (Configuration mode)
2.You can Add, Edit, or Delete directories.
a.Each can have its own settings
b.Click Save after editing or Add after adding a new directory
3.Start the .exe from the command line with a command line argument > Execution mode
a.For example, Quadrotech.EnterpriseVault.TempFileDeleter.exe EXECUTE
Contact Quadrotech Archive Shuttle support if you have any feedback regarding this tool.
This tool can be downloaded here.
Office 365 Imports not working
If Archive Shuttle is unable to import data into Office365, the following steps and information will help Support investigate the issue:
General Information
·Location of the Office 365Module (is it on the Archive Shuttle Core Server)
·Archive Shuttle Core version
·Archive Shuttle modules version
Steps to follow
Are all mappings affected? Yes/No. If yes, go to step 1, if no, go to step 2.
Step 1
1.Check that the Office 365modules are scheduled
a.This is on the Modules page
b.Take a screenshot of the schedule
2.Check that the Office 365module is enabled, and the Core is able to communicate with it
a.The module should not show as red on the Modules page
b.Take a screenshot of the Modules page
3.Check that the Office 365link has the Office 365module mapped
a.This is on the Links Page
b.Take a screenshot, and highlight the link
4.Check that the link has the same staging area as where the export was performed to
a.This is on the Links page
b.Take a screenshot, and highlight the link
5.Check that the Office 365 Credential Editor has been provided Admin Credentials
a.You can see this in the Office 365 Credential Editor on the Server where the module is installed
b.Take a screenshot of the Credential Editor
6.Check that the Office 365Service Accounts have been granted the Application Impersonation role:
a.You can see this PowerShell. More information is available in this article.
b.Take a screenshot of the role assignment.
7.Review errors on the Failed Items screen
a.If the autodiscover service couldnt be located, you will have to change that setting in the module.exe.config.
Step 2
Is it some items for all mappings? Yes/No. If yes, continue with this step, if no, go to step 3.
1.Check the storage quota is not exhausted
a.Take a screenshot of the mailbox properties
2.Check that the exported-but-not-imported figure has not exceeded 100%
a.Take a screenshot of the System Health page
3.Review any errors on the Failed Items screen
a.Take a screenshot of the errors
Step 3
Did the import start, and then just stop? Yes/No. If yes, continue with this step, if no go to step 4.
1.Check that the module doesnt have a schedule defined
a.This is on the modules page
b.Take a screenshot of the schedule
2.Check the storage quota is not exhausted
a.Take a screenshot of the mailbox properties
3.Check that the exported-but-not-imported figure has not exceeded 100%
a.Take a screenshot of the System Health page
4.Review any errors on the Failed Items screen
a.Take a screenshot of the errors
Step 4
1.Gather logs:
a.Ensure that the module is configured for TRACE level logging
b.This is done on the modules page
c.Reprocess the item(s) or click on Failed Imports, or click on Hanging Imports
d.Wait one to five minutes
e.Generate a Support Bundle for review by Support
Exchange Imports not working
If Archive Shuttle is unable to import data into Exchange, the following steps and information will help Support investigate the issue:
General Information
·Exchange Version information
·Location of the Exchange Import Module (is it on the Archive Shuttle Core Server)
·Archive Shuttle Core version
·Archive Shuttle modules version
·Outlook version
Steps to follow
Is it all items for all mappings? Yes/No. If yes, go to step 1, if no, go to step 2
Step 1
1.Check that the Exchange Import modules are scheduled.
a.This is on the Modules page
b.Take a screenshot of the schedule
2.Check that the Exchange Import module is enabled, and the Core is able to communicate with it.
a.The module should not show as red on the Modules page
b.Take a screenshot of the Modules page
3.Check that the link containing the target Exchange Information store has an Exchange Import Module that is mapped.
a.This is on the Links page
b.Take a screenshot, and highlight the link
4.Check that the link has the same staging area as the export was performed to.
a.This is on the Links page
b.Take a screenshot, and highlight the link
5.Check the version of Outlook that is installed where the module is located.
a.Ensure that the default profile is configured for an account that has full control on all mailboxes
b.Ensure that the default profile is configured to launch straight into Outlook, and that it is an online profile
Step 2
Is it all items for all mappings? Yes/No. If yes, go to step 1, if no, go to step 2.
1.Check that the disk space is not exhausted.
a.Collect a screenshot
2.Check that the exported-but-not-imported figure has not exceeded 100%.
a.Take a screenshot of the System Health page
3.Review any errors on the Failed Items page.
a.Take a screenshot of the errors
4.Check that EWS Impersonation has been configured.
a.This is a setting in the modules .exe.config file.
Step 3
Did the import start, and then just stop? Yes/No. If yes, continue with this step, if no go to step 4
1.Check that the module doesnt have a schedule defined.
a.This is on the modules page
b.Take a screenshot of the schedule
2.Check the disk space is not exhausted.
a.Collect a screenshot
3.Check that the exported-but-not-imported figure has not exceeded 100%.
a.Take a screenshot of the System Health page
4.Review any errors on the Failed Items page.
a.Take a screenshot of the errors
5.Check that EWS Impersonation has been configured.
a.This is a setting in the modules .exe.config file.
Step 4
1.Gather logs:
a.Ensure that the module is configured for TRACE level logging
b.This is done on the modules page
c.Reprocess the item(s) or click on Failed Imports, or click on Hanging Imports
d.Wait 1-5 minutes
e.Generate a Support Bundle for review by Support.
Native Format Imports not working
If Archive Shuttle is unable to import data into Native Format, the following steps and information will help Support investigate the issue:
General Information
·Location of the Native Format Import Module (is it on the Archive Shuttle Core Server)
·Archive Shuttle Core version
·Archive Shuttle modules version
·Outlook version
Steps to follow
Is it all items for all mappings? Yes/No. If yes, go to step 1, if no, go to step 2.
Step 1
1.Check that the Native Format Import Module are scheduled
a.This is on the Modules page
b.Take a screenshot of the schedule
2.Check that the Native Format Import Module is enabled, and the Core is able to communicate with it
a.The module should not show as red on the Modules page
b.Take a screenshot of the Modules page
3.Check that the Native Format Import link does have the Office 365module mapped
a.This is on the Links Page
b.Take a screenshot, and highlight the link
4.Check that the link has the same staging area as the export was performed to
a.This is on the Links page
b.Take a screenshot, and highlight the link
5.Check the version of Outlook which is installed where the module is located
a.Ensure that the default profile is configured for an account which has full control on all mailboxes
b.Ensure that the default profile is configured to launch straight into Outlook, and that it is an online profile
6.Review errors on the Failed Items screen
a.If the autodiscover service couldnt be located you will have to change that setting in the module.exe.config.
Step 2
Is it some items for all mappings? Yes/No. If yes, continue with this step, if no, go to step 3.
1.Check the storage quota is not exhausted
a.Collect a screenshot
2.Check that the exported-but-not-imported figure has not exceeded 100%
a.Take a screenshot of the System Health page
3.Review any errors on the Failed Items screen
a.Take a screenshot of the errors.
Step 3
Did the import start, and then just stop? Yes/No. If yes, continue with this step, if no go to step 4
1.Check that the module doesnt have a schedule defined
a.This is on the modules page
b.Take a screenshot of the schedule
2.Check that the exported-but-not-imported figure has not exceeded 100%
a.Take a screenshot of the System Health page
3.Review any errors on the Failed Items screen
a.Take a screenshot of the errors
Step 4
1.Gather logs:
a.Ensure that the module is configured for TRACE level logging
b.This is done on the modules page
c.Reprocess the item(s) or click on Failed Imports, or click on Hanging Imports
d.Wait one to five minutes
e.Generate a Support Bundle for review by Support.
© ALL RIGHTS RESERVED. Feedback Termini di utilizzo Privacy Cookie Preference Center