Virtual Export of protected machine with EISA partition will not boot (4039207)

The following process will reset the active partition, fix the MBR (master boot record), rebuild the boot sector and recreate the boot record.

1. Boot the server using the Windows server installation ISO.
2. On the main screen, select Next and then Repair Your Computer. 
   At this point, the repair procedure does not detect the desired Windows installation and presents none to select, even after storage drivers are loaded.
3. Select Use recovery tools and then Next.
4. In the following screen, select the Command Prompt option.
5. Enter this command at the prompt: diskpart.exe
6. Enter this command to list available disks: DISKPART> list disk
7. Find the desired disk in the list and select it by entering this command: DISKPART> select disk number
   where number is the number of the disk that contains the Windows installation.
8. Select the Windows partition on the disk: DISKPART> select partition number
   where number is the partition number.
9. Make the selected partition active (bootable): DISKPART> active
10. Exit the diskpart utility: DISKPART> exit
    The partition is now bootable.
11. Reapply the master boot record and the boot sector by entering these commands:
     bootrec.exe /FixMbr
     bootrec.exe /FixBoot
12. When the master boot record and boot sector have been reapplied, rebuild the Boot Configuration Database (BCD) by executing:
     bootrec.exe /rebuildbcd     - Note: The /rebuildbcd option scans all disks for Windows installations.
13. For each instance found, you are asked if that instance should be added to the BCD. Answer Y for the Windows installation that is currently being repaired.
14. When the Boot Configuration Database has been rebuilt, reboot again using the Windows installation media and select Repair Your Computer.
    The desired Windows install should now be detected. If it is not, load the appropriate storage drivers.
15. When the Windows install instance displays in the list, select it, then click Next and choose Command Prompt.
16. From the command line, execute:# X:\sources\recovery\StartRep.exe

The exported machine should now boot successfully.