Use the Set-ReplicationResponse command to manage pending replication requests.
Usage
The usage for the command is as follows:
Set-ReplicationResponse -core [host name] -user [user name] -password [password] -id [replication ID] -accept | -deny | -ignore -protectedserver [name | IP address]
Command Options
The following table describes the options available for the Set-ReplicationResponse command:
Table 159: Set-ReplicationResponse command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used |
-id |
The identifier for the replication job or pending replication request. It can be a remote Core ID, host name, customer ID, email address, or pending replication request ID. |
-accept |
Accepts the replication request. |
-deny |
Denies the replication request. |
-ignore |
Ignores the replication request. |
-protectedserver |
When responding to a replication request, use this option to apply your response to list of protected servers with a repository name or ID. Use the parameter "all" to apply response to all requested machines. |
Examples:
Accept a pending replication request for one protected machines:
>Set-ReplicationResponse -id customer@email.address -accepted -protectedserver 10.10.1.1 Repository1 10.10.1.2 Repository2 -responsecomment A response comment
Deny a pending replication request:
>Set-ReplicationResponse -id customer@email.address -deny
Businesses often use long-term storage to archive both compliant and non-compliant data. The archive feature in Rapid Recovery is used to support the extended retention for compliant and non-compliant data. The administrator can save an archive on the local storage or network location by specifying the /Path command and credentials.
Usage
The usage for the command is as follows:
Start-Archive -path -startdate -enddate [-all] | -protectedserver [machine name] or [IP]] -core [host name] -user [user name] -password [password]
Command Options
The following table describes the options available for the Start-Archive command:
Table 160: Start-Archive command options
-? |
Display this help message. |
-path |
Location path. Example path: ‘D:\work\archive’ or network path: ‘\\servername\sharename’. |
-all |
Archive recovery points for all machines on the Core. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-startdate |
Start date of the date range for the created recovery points. Should be in the format specified by the OS on the current PC. |
-enddate |
End date of the date range. Defaults to the current time. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used. |
-protectedserver |
Archive recovery points for the specified machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used. |
-archiveusername |
Optional. Required for network path only. |
-archivepassword |
Optional. Required for network path only. |
-comment |
Optional. Example: -comment 'Before install new application'. |
Example:
Archive all recovery points for all machines on the Core:
>Start-Archive -path D:\work\archive -startdate 'Example 04/30/2012' –all
The Start-AttachabilityCheck command forces an attachability check for all SQL Server databases protected by the Core.
Usage
The usage for the command is as follows:
Start-AttachabilityCheck -core [host name] -user [username] - password [password]
- protectedserver [machine name | IP address] -rpn [number | numbers] | -time [time string]
Command Options
The following table describes the options available for the Start-AttachabilityCheck command:
Table 161: Start-AttachabilityCheck command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. |
-user |
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used. |
-password |
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used. |
-protectedserver |
The protected machine on which to perform the SQL attachability check. |
-rpn |
Optional. The sequential number of a recovery point on which to perform the SQL attachability check.
You can use the -GetRecoveryPoints command to obtain recovery point numbers. You can specify several space-separated numbers to perform the checks against multiple recovery points with a single command.
Note: If neither ‘time’ nor ‘rpn’ option is specified in this command, than the most recent recovery point is used for the attachability check. |
-time |
Optional. Determines recovery point to be selected for SQL attachability check. You need to specify exact time in the format “MM/DD/YYYY hh:mm tt” (for example: “04/24/2015 09:00 AM”).” Specify date time values of the time zone set on your local machine.
Note: If neither ‘time’ nor ‘rpn’ option is specified in this command, than the most recent recovery point will be exported. |
Example:
Perform a SQL attachability check on the most recent recovery point for the specified protected SQL server:
>Start-AttachabilityCheck - protectedserver 10.10.9.120
You can use the Start-AzureDeploy command to export a virtual machine (VM) to a Microsoft Azure cloud account.
Usage
The usage for the command is as follows:
Start-AzureDeploy -core [host name] -user [user name for Core]
-password [password for Core] -protectedserver [name | IP address] -volumes
[volume names | all] -destinationcontainer [Azure destination container]
-deploymentname [name of deployment] -subscriptionid [Azure subscription ID]
-cloudservicename [cloud service name] -vmname [virtual machine name] -vmsize
[virtual machine size] -endpointname [rdp | ssh] -protocol [tcp | udp]
-publicremoteaccessport [public port number] -privateremoteaccessport [private
port number]
Command Options
The following table describes the options available for the Start-AzureDeploy command:
Table 162: Start-AzureDeploy command options
-? |
Display this help message. |
-core |
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine. |
-user |
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used. |
-password |
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used. |
-protectedserver |
Protected machine with recovery points that you want to export. |
-volumes |
Optional. List of additional volume names for the deploy. If you use the value all or use no value, then all volumes deploy. |
-destinationcontainer |
The name of the Azure destination container you want to use for the deploy. |
-deploymentname |
The name of the deployment. |
-subscriptionid |
The Azure subscription ID. |
-cloudservicename |
The name of the Azure cloud service. |
-vmname |
The name of the virtual machine. |
-vmsize |
The size of the virtual machine; for example, A0, Basic_A4Standard_G1. |
-endpointname |
The Azure endpoint protocol used only for remote access rdp or ssh. The default value is rdp. |
-protocol |
The protocol used only for remote access tcp or udp. The default value is tcp. |
-publicremoteaccessport |
The public port for using remote access. The default value is 3389. |
-privateremoteaccessport |
The private port for using remote access. The default value is 3389. |
-privateagentport |
Optional. The Agent port. If the port value is 0, then the value is determined by the Agent configuration.
Note: If neither the parameter -publicagentport nor -privateagentport is specified, then no endpoint is added. |
-publicagentport |
Optional. The external Agent port. If the port value is 0, then the value is determined by the Agent configuration.
Note: If neither the parameter -publicagentport nor -privateagentport is specified, then no endpoint is added. |
-privatetransferport |
Optional. The TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration.
Note: If neither the parameter -publictransferport nor -privatetransferport is specified, then no endpoint is added. |
-publictransferport |
Optional. The external TCP port upon which to accept connections from the Core for the transfer of data from the Agent. If the port value is 0, then the value is determined by the Agent configuration.
Note: If neither the parameter -publictransferport nor -privatetransferport is specified, then no endpoint is added. |
Examples:
Deploy data to Azure:
>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0
Deploy data to Azure using a specified endpoint:
>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -endpointname ssh -protocol udp -publicremoteaccessport 1555 -privateremoteaccessport 22
Deploy data to Azure with specified Agent and transfer endpoint when the -privateagentport option has a user-defined value of 8006. The parameter for -publicagentport uses the special value 0, which is copied from -privateagentport. The parameter for -privatetransferport uses the special value 0, which is taken from the Agent configuration. The parameter for -publictransferport uses the special value 0, which is copied from -privatetransferport:
>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 8006 -publicagentport 0 -privatetransferport 0 -publictransferport 0
Deploy data to Azure using all available disks:
>Start-AzureDeploy -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.5.22 -deploymentname Deploy1 -destinationcontainer container1 -subscriptionid "111111-22222-33333-4444-555555" -cloudservicename Service1 -vmname VirtualMachine -vmsize A0 -privateagentport 8006 -publicagentport 0 -privatetransferport 0 -publictransferport 0 -Volumes all
