Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Rapid Recovery 6.10 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-MigrateAgent Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Remove-Agent

The Remove-Agent PowerShell command lets you remove a machine from Rapid Recovery Core protection.

Usage

The usage for the command is as follows: 

Remove-Agent -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -deleterecoverypoints -all

Command Options

The following table describes the options available for the Remove-MountAgent command:

Table 139: Remove-Agent command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used. 
-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Dismount all mounted recovery points for the current protected machine. 
-deleterecoverypoints
 Optional. Delete all recovery points for this protected machine. 
-all
 Optional. Delete all protected machines from the Core.

Example:

Dismount all protected machines and their recovery points: 

>Remove-Agent -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd -deleterecoverypoints -all

Remove-EsxAutoProtectObjects

The Remove-EsxAutoProtectObjects cmdlet lets you remove specific objects on vCenter or ESXi server from protection by a Core.

Usage

The usage for the command is as follows: 

Remove-EsxAutoProtectObjects -core [host name] -user [user name] -password [password] -protectedserver [name | IP address] -autoprotectobjects

Command Options

The following table describes the options available for the Remove-EsxAutoProtectObjects command:

Table 140: Remove-ESXAutoProtectObjects command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to edit the vCenter or ESXi objects for a specific protected machine. 
-autoprotectobjects
 A list of vCenter or ESXi objects each enclosed in double quotes and separated by a comma.

Example:

Remove specific vCenter or ESXi objects from protection auto-protection by the Core: 

>Remove-EsxAutoProtectObjects -protectedserver 10.10.8.150 -autoprotectobjects "vm1", "vm2"

Remove-HyperVClusterSharedVirtualDisks

The Remove-HyperVClusterSharedVirtualDisks cmdlet lets you remove shared Hyper-V virtual disks from protection of a Core.

Usage

The usage for the command is as follows: 

Remove-HyperVClusterSharedVirtualDisks -core [host name] -user [user name] -password [password] -shareddisks [shared virtual disks name or path collection | all]

Command Options

The following table describes the options available for the Remove-HyperVClusterSharedVirtualDisks command:

Table 141: Remove-HyperVClusterSharedVirtualDisks command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to edit the shared virtual disks for a specific protected machine. 
-shareddisks
 A list of shared disks each separate by a comma.

Example:

Remove one shared virtual disk from protection: 

>Remove-HyprVClusterSharedVirtualDisks -protectedserver "HV-2012R2" -shareddisks "Shared Disk 1"

Remove-HyperVClusterVirtualMachines

The Remove-HyperVClusterVirtualMachines cmdlet lets you remove specific virtual machines (VMs) of a Hyper-V cluster from protection of a Core.

Usage

The usage for the command is as follows: 

Remove-HyperVClusterVirtualMachines -core [host name] -user [user name] -password [password] -repository [name] -protectedserver [name | IP address] -virtualmachines [virtual machines collection | all]

Command Options

The following table describes the options available for the Remove-HyperVClusterVirtualMachines command:

Table 142: Remove-HyperVClusterVirtualMachines command options
Option Description 
-?
 Display this help message. 
-core
 Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine. 
-user
 Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used. 

-password
 Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used. 

-protectedserver
 Use this option to protect virtual machines. 
-virtualmachines
 A list of the virtual machines that you want to protect, each separated by a comma. The name of the VM must be enclosed in double quotes. 
-deleterecoverypoints
 Optional. Include this option if you want to delete all of the recovery points for this VM.

Example:

Remove specific virtual machines of a Hyper-V cluster from protection by the Core and delete its recovery points: 

>Remove-HyperVClusterVirtualMachines -protectedserver hvcluster -virtualmachines "Win8x64-gen1", "Win2012x64-gen2" -deleterecoverypoints
Documents connexes
Rapid Recovery - 6.10
Commands and Scripting Reference Guide
Installation and Upgrade Guide
Release Notes
System Requirements Guide
User Guide
Showing 1 to 5 of 5 rows

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation