To use the Dashboard page to display the current number of system events (Number of Events), complete the following:
NOTE: This method in convenient when you are already at the Dashboard page and want to display the current system events. |
1. |
In the Dashboard page, click the Number of Events link in the System Status bar (for example, Number of Events: 2). |
2. |
In the Event Filter pane, you can select to filter events by using the Event Severity pull-down list, and setting the Timestamp From and Timestamp To starting and ending setpoints. |
3. |
In the Event Severity pull-down list, select the severity level of events that you want to filter and display (All, Critical, Warning, or Info). |
4. |
In Message Contains, enter a word or string of words you want to search for in the Message text field, and the DR Series system will perform a case-insensitive match for your entry (no other search options are supported). Matches are displayed in the Events summary table. |
5. |
In Timestamp From, click in the field or click the calendar icon to display the current month and day. |
◦ |
Use the Hour and Minute sliders to set the desired time in hours and minutes, or click Now to use the current time. |
◦ |
When configured, click Done. |
6. |
In Timestamp To, click in the field or click the calendar icon to display the current month and day. |
◦ |
Use the Hour and Minute sliders to set the desired time in hours and minutes, or click Now to use the current time. |
◦ |
When configured, click Done. |
7. |
Click Start Filter to display system events in the Events summary table based on the settings you selected. |
◦ |
Set the number of events to display per page: click Events per page at the lower-right corner of the table and select either 25 or 50 events to display per page. |
◦ |
To display other pages of system events, click prev or next, click on a specific page number, or enter a page number in the Goto page and click Go to display that page of system events. |
8. |
To clear the current filter settings, click Reset and set new filter values using the process described in steps 3 through 6. |
3. |
Use the Event Filter to search for events that match the criteria you select (event severity, message content, timestamp from, and timestamp to ranges). |
The Events page contains an Event Filter pane that lets you filter the type of system events you want to display in the Events summary table. Event filtering is done by selecting the severity level and using a timestamp. Choose the severity level by selecting it in the Event Severity drop-down list, and refine your search by selecting specific start and end setpoints in Timestamp from and Timestamp to.
To filter the system events you want to display in the Events summary table, complete the following:
2. |
In the Event Filter pane, select the desired severity to display from the Event Severity drop-down list. |
◦ |
All—displays all four types of system events (All, Critical, Warning, and Info) |
◦ |
Critical—displays only critical events (in red) |
◦ |
Warning—displays only warning events (in yellow) |
◦ |
Info—displays only informational events |
3. |
In Message Contains, enter a word or string of words that you want to search for in the Message text field, and the DR Series system will perform a case-insensitive match for your entry (no other search options are supported). Matches are displayed in the Events summary table. |
4. |
◦ |
Adjust the Hour and Minute sliders to the desired time (or click Now to set the date and time as the current date and time in hours and minutes). |
◦ |
Click Done. |
5. |
◦ |
Adjust the Hour and Minute sliders to the desired time (or click Now to set the date and time to be the current date and time in hours and minutes). |
◦ |
Click Done. |
6. |
• |
• |
© ALL RIGHTS RESERVED. Conditions d’utilisation Confidentialité Cookie Preference Center