Change Auditor 7.2 - User Guide


	TIP: Whenever you upgrade from a previous version of Change Auditor, the default configuration settings will be restored. Therefore, if you want to modify the default configuration settings, it is best to copy the default configuration and then save it using a different name. NOTE: The values for the proxy server settings are not included when you copy a configuration.

The default configuration consists of the following settings:

System Settings:

•

Polling Interval: 900 seconds

•

Forwarding Interval: 5 seconds

•

Kerberos Ticket Lifetime: 10 hours

A Kerberos user ticket can be used to verify your identity and gain access to specific resources or services in your domain. A golden ticket is a forged Kerberos ticket. An attack using a golden ticket is extremely dangerous due to the forged identity, elevated access it allows, and because it can be reused over its lifetime (10 years by default).

The setting determines the maximum ticket lifetime. When this value is exceeded, the “Kerberos user ticket that exceeds the maximum ticket lifetime detected” domain controller authentication event is generated which may indicate a possible golden ticket attack.

•

Retry Interval: 300 seconds

•

Maximum events per connection: 1,500

•

Agent Load Threshold: 10,000

•

Allowed time for connection: 24 x 7


	NOTE: These system settings apply to both server agents and workstation agents.

Proxy Server settings

•

Proxy Server: Not set

•

Port: 8080

•

Requires authentication: Not set

File System settings:

•

Discard duplicates that occur within: 10 seconds


	NOTE: This setting only applies to file system auditing which is available with Change Auditor for Windows File Servers, Change Auditor for EMC and Change Auditor for NetApp.

AD Query settings:

•

Discard query results less than: 0 records

•

Discard queries taking less than: 20 milliseconds

•

Discard duplicate queries occurring within: 15 minutes

•

AD Query auditing enabled


	NOTE: These settings only apply to Active Directory query auditing which is available with Change Auditor for Active Directory Queries.

Exchange settings:

•

Discard duplicate folder opens that occur within: 0 seconds


	NOTE: This setting only applies to Exchange auditing which is available with Change Auditor for Exchange.

You can define and assign different agent configurations to each deployed server agent from the Agent Configuration page on the Administration Tasks tab. However, workstation agents always use the default configuration; they cannot be assigned to a different agent configuration.

When the default configuration is modified, workstation agents will only receive these modifications when the polling interval determines there has been a change; clicking Refresh Configuration on the Agent Configuration page only pushes agent configuration changes out to server agents.

To enable custom auditing and protection, you must assign templates to an agent’s configuration. The custom auditing and protection features that require custom templates to be assigned to an agent’s configuration are:

•

Excluded Accounts Auditing

•

File System Auditing

•

File System Protection

•

Registry Auditing

•

Service Auditing

•

SQL Auditing


	NOTE: The NetApp, EMC, SharePoint, and Office 365 auditing templates define which agents are used to capture events; however, these templates do not use the agent configurations from the Agent Configuration page as described in this section. See the Quest Change Auditor for NetApp User Guide, Quest Change Auditor for EMC User Guide, Quest Change Auditor for SharePoint User Guide, Office 365 and Azure Active Directory Auditing User Guide.

Agent Configuration page

This page displays when Agent is selected from the Configuration task list in the navigation pane of the Administration Tasks tab. From here you can define and assign agent configurations.


	NOTE: Workstation agents always use the default configuration and cannot be assigned to a different agent configuration; therefore, they are not included on the Agent Configuration page.

The following information is available for each deployed server agent. To display columns not on by default, use the Field Chooser button located to the far left of the column headings.


	NOTE: All dates and times are based on the client’s current local date and time. The format used to display the date and time is determined by the local computer’s regional and language setting.

Table 1. Agent Configuration page: Field descriptions

Indicates whether Active Directory auditing and/or protection has been defined.

ADAM (AD LDS)

Indicates whether ADAM (AD LDS) auditing and/or protection has been defined.

Agent

Yes

Displays the NetBIOS name of the server that hosts the Change Auditor agent.

Agent FQDN

Displays the fully qualified domain name (FQDN), consisting of the host and domain name including the top-level domain, of an agent.

Configuration

Yes

Displays the name of the agent configuration assigned to each agent listed.

Coordinator

Displays the computer name of the Change Auditor coordinator that an agent is connected through.

DB Size

Displays the size of an agent’s database.

Domain

Yes

Displays the name of the domain where the server resides.

EMC

Yes

Indicates whether an agent has been assigned to an EMC auditing template to receive EMC events.

Events Last 24 Hours

Displays the number of events encountered on the agent during the past 24 hours from when the Agent Configuration page is initially opened during the current client session or when the page is refreshed using the Refresh button.

The value in this field is a hypertext link and when selected launches a quick search to display the events generated in the last 24 hours.

Events Last Hour

Displays the number of events encountered on the agent in the last 60 minutes from when the Agent Configuration page is initially opened during the current client session or when the page is refreshed using the Refresh button.

The value in the field is a hypertext link and when selected launches a quick search to display the events generated in the last 60 minutes.

Events Today

Displays the number of events encountered on the agent since 12:00 a.m. of the current day (based on the relative coordinator computer's time).

The value in this field is a hypertext link and when selected launches a quick search to display today’s events.

Events Total

Displays the number of events encountered since the agent was started.

The value in this field is a hypertext link and when selected launches a quick search to display all events encountered since the agent was started.

Events Yesterday

Displays the number of events encountered between 12:00 a.m. yesterday and 12:00 a.m. of the current day (based on the relative coordinator computer's time).

The value in this field is a hypertext link and when selected launches a quick search to display yesterday’s events.

Exchange

For agents hosting Exchange, this column indicates whether Exchange Mailbox auditing and/or Exchange Mailbox protection has been defined.

Office 365

Yes

Indicates whether an agent has been assigned to an Office 365 auditing template to receive Exchange Online, SharePoint Online, and OneDrive for Business events.

Exchange Server

Indicates whether the server is an Exchange server.

Exclude Account

Yes

Indicates whether an Excluded Accounts Auditing template has been assigned to an agent’s configuration.

File System

Yes

Indicates whether a File System Auditing or File System Protection template has been assigned to an agent’s configuration.

Forest

Displays the name of the forest where the agent resides.

Group Policy

Indicates whether Group Policy protection has been defined.

Last Update

Displays the date and time when the agent configuration was last updated.

NetApp

Yes

Indicates whether an agent has been assigned to a NetApp Auditing template to receive NetApp filer events.

Registry

Yes

Indicates whether a Registry Auditing template has been assigned to an agent’s configuration.

Service

Yes

Indicates whether a Service Auditing template has been assigned to an agent’s configuration.

SharePoint

Yes

Indicates whether an agent has been assigned to a SharePoint Auditing template to capture SharePoint events.

SQL

Yes

Indicates whether a SQL Auditing template has been assigned to an agent’s configuration.

Skype for Business CMS

Yes

Indicates whether a Skype for Business template has been created for the Central Management Store SQL Server.

SQL Data Level

Yes

Indicates whether a SQL Data Level Auditing template has been assigned to an agent’s configuration.

Startup Time

Displays the date and time when the agent was last initialized.

Status

Displays the current status of the agent:

•

•

•

Displays the agent platform:

•

•

•

Displays the number of events that have not yet been sent to the coordinator.

Uptime

Displays how long the agent has been running.

Version

Displays the version number of the Change Auditor agent currently deployed.

Define agent configurations

To define a new agent configuration:

Open the Administration Tasks tab and click Configuration.

Select Agent in the Configuration task list.

From the Agent Configuration page, click Configurations.

The Configuration Setup dialog opens, which contains a list of configuration definitions available as well as the means for creating a new configuration.

Click Add to create a new definition or click Copy to duplicate the configuration selected in the Configurations list box.

This adds a new configuration to the list, allowing you to name the new configuration, specify the system settings and assign auditing and protection templates to the configuration.

With the new/copied configuration highlighted in the Configuration list, enter the name for your new agent configuration.

Use the tabbed pages at the top of the dialog to modify the system settings, file system settings, AD Query settings, Exchange settings, Defender auditing, and Authentication Services auditing. The settings that can be modified on these tabs include:

Table 2. Agent Configuration settings
Setting:	Default:	Valid range:
System Settings
Polling Interval	900 seconds	60 - 9999 seconds
Forwarding Interval	5 seconds	5 - 999 seconds
Retry Interval	300 seconds	60 - 600 seconds
Kerberos Ticket Lifetime (hours)	10 hours	1 to 99999 hours
Max events per connection	1500 events	100 - 99999 events
Agent Load Threshold	10000 events	100 - 100000 events
Allowed time for connection	Sunday - Saturday 12:00 am - 11:59 pm	N/A
Proxy Server Settings If your organization uses a proxy server to connect to the internet, these settings are required to audit Azure Active Directory and Office 365 targets. Selecting Validate Proxy Settings uses the configured settings to access a website through the proxy server. This test uses the https://www.quest.com web site. NOTE: Clearing the value for 'Proxy Server' and selecting Apply resets all proxy settings to default values.
Proxy Server	Not set	fully qualified domain name, down-level name, or IPv4 address
Port	8080	1- 65535
Requires Authentication If your proxy server requires authentication, click the option and enter the required credentials.	Not set	N/A
File System The settings on the File System tab only apply when Change Auditor for Windows File Servers, Change Auditor for EMC or Change Auditor for NetApp is licensed.
Discard duplicates that occur within nn seconds	Enabled by default 10 seconds	1 - 600 seconds
Audit all configured, including duplicates (Not recommended)	Disabled by default	N/A
AD Query The settings on the AD Query tab only apply when Change Auditor for Active Directory Queries is licensed.
Discard query results less than nn records	0 records	0 - 99999 records
Discard queries taking less than nn milliseconds	20 milliseconds	0 - 99999 milliseconds
Discard duplicate queries occurring within nn minutes	15 minutes	1 - 1440 minutes
AD Query auditing enabled	Enabled by default	N/A
Exchange The setting on the Exchange tab only applies when Change Auditor for Exchange is licensed. NOTE: These settings only apply to the Exchange subsystem events; they do not apply to the Office 365 subsystem events.
Discard duplicates that occur within nn seconds	0 seconds	0 - 600 seconds
Defender
Defender auditing enabled	Disabled by default	N/A
Authentication Services
Authentication Services auditing enabled	Disabled by default	N/A

To add an auditing or protection template to the selected configuration, use the Auditing and Protection Templates pane. This pane displays the auditing and protection templates previously defined.

Use one of the following methods to assign a template to an agent configuration:

•

Select a template and ‘drag and drop’ it onto a configuration in the Configuration list.

•

Select a configuration from the Configuration list and ‘drag and drop’ it onto a template in the Auditing and Protection Templates pane.

•

Select a configuration, then select a template, right-click and select Assign.

•

Select a configuration, then select a template, click in the corresponding Assigned cell and click Yes.

Repeat this step to add additional templates to the selected configuration.

If the templates list is empty or you want to define a new template, click Edit Templates.

•

On the Auditing and Protection Templates dialog, select the tab for the type of template to be added (e.g., Excluded Accounts) and click Add Template.

•

The associated wizard will be displayed allowing you to define the auditing or protection to be applied. Refer to the appropriate chapters in this guide for details on completing each of these wizards.

Once you have defined the new template, click OK to close this dialog and return to the Configuration Setup dialog. Select this new template, right-click and select Assign.

Once you have named the configuration, selected the system settings and added auditing or protection templates, click OK to save your configuration and return to the Agent Configuration page.

Assign agent configurations to server agents

Once agent configurations are defined you can assign it to one or more installed server agents from the Agent Configuration page.

To assign a configuration to an agent from the Agent Configuration page:

On the Agent Configuration page, select one or more agents from the agent list and click Assign.

On the Agent Assignment dialog, select the configuration definition to be assigned to the selected agents and click OK.

On the Agent Configuration page, the agent configuration assignment will be updated in the Configuration column.

Select the agents assigned to the agent configuration and click Refresh Configuration to ensure that the assigned agents are using the latest agent configuration.

To reset ALL agent configurations back to the default configuration:

On the Agent Configuration page, click Default All.

A message is displayed confirming that you want to reset all agent configurations back to the factory default settings. Click Yes.

The agent configuration assignment will be updated in the Configuration column.

Select the agents assigned to the agent configuration and click Refresh Configuration to ensure that the assigned agents are using the latest agent configuration.

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation

Veuillez sélectionner votre produit

Afin de mieux répondre à vos besoins, précisez l'objet du tchat:

Solutions recommandées pour votre problème

Change Auditor 7.2 - User Guide

Introduction

Agent Configuration page

Define agent configurations

Assign agent configurations to server agents