立即与支持人员聊天
与支持团队交流

DR Series DR4300 - DR Series System Administrator's Guide

Introducing the DR Series system documentation Introducing the DR Series system Setting up the DR Series system Configuring the DR Series system settings Managing containers Managing replications Monitoring the DR Series system Using GlobalView Configuring and using Rapid NFS and Rapid CIFS Configuring and using Rapid Data Access with NetVault Backup and with vRanger Configuring and using RDA with OST
Understanding RDA with OST Guidelines Terminology Supported RDA with OST software and components Best Practices: RDA with OST and the DR Series System Setting client-side optimization Configuring an LSU Installing the RDA with OST plug-in Configuring DR Series system information using NetBackup Backing Up Data From a DR Series System (NetBackup) Using Backup Exec with a DR Series system (Windows) Understanding the OST CLI commands Understanding RDA with OST Plug-In Diagnostic Logs Collecting Diagnostics Using a Linux Utility Guidelines for Gathering Media Server Information
Configuring and using VTL Configuring and Using Encryption at Rest Support, maintenance, and troubleshooting Supported Ports in a DR Series System

Enabling active scripting in IE

Enabling active scripting in IE

To enable Active Scripting (JavaScript) in Microsoft Windows Internet Explorer (IE) web browsers, complete the following steps:

 
NOTE: This procedure describes how to configure your Windows IE web browser to enable Active Scripting (JavaScript). This setting is often disabled by default on Windows-based servers.
1.
Launch the IE web browser, and click Tools→ Internet Options.
The Internet Options page is displayed.
2.
Click the Security tab, and click Custom level....
The Security Settings — Local Intranet Zone page is displayed.
3.
Using the right scroll bar, scroll down the Settings choices until you reach Scripting.
4.
In Active scripting, click Enable.
5.
Click OK to enable JavaScript and the Active Scripting feature for your web browser.
The Internet Options page is displayed.
6.
Click OK.
Parent topic 

Disabling the Compatibility View settings for IE

Disabling the Compatibility View settings for IE

To disable the Compatibility View settings of the IE web browser, complete the following steps:

 
NOTE: This procedure describes how to disable the Compatibility View settings to ensure there is no conflict between different versions of the Microsoft Internet Explorer (IE) web browser you use to access the DR Series system. Disabling the compatibility view settings requires that the Display all websites in Compatibility View check box option in the Compatibility View Settings page is cleared, and that there are no DR Series systems or domains associated with these systems listed in the Compatibility View list on this page.
1.
Launch the IE web browser, and click Tools→ Compatibility View settings.
The Compatibility View Settings page is displayed.
2.
If selected, clear the Display all websites in Compatibility View check box option.
3.
If any DR Series systems are listed in the Compatibility View list, select the entry and click Remove.
Repeat this step for any additional DR Series systems that are listed.
4.
Click Close.
Parent topic 

Configuring the DR Series system settings

Configuring the DR Series system settings

Viewing system configuration settings
Using the Configuration Wizard
Registering with the Support Portal
Configuring Active Directory settings
Configuring system date and time settings
Configuring DR Series system enclosures
Managing and viewing DR Series system licenses
Configuring networking settings
Understanding system operation scheduling
Configuring an SSL certificate for your DR Series system
Managing storage groups
Managing users
Configuring share-level security for CIFS shares

In the DR Series system GUI, you can easily view and configure system settings such as, active directory, system date and time, expansion shelf enclosures, licenses, networking, schedules for system operations, SSL certificates, storage groups, and users.

 
NOTE: Before you run any DR Series system operations for the first time or edit system settings, you should have first initialized the system. Initializing the DR Series system requires that you configure and manage a number of very important system settings before any other tasks, and Dell recommends that you use the Initial System Configuration Wizard to configure your DR Series system. Changing some of the system settings using the DR Series system GUI (such as bonding, MTU, hostname, IP address, and DNS) can cause issues that can affect your DR Series system GUI access. For more information about initializing the system, see the topic, Initializing the DR Series System.
 
 

Viewing system configuration settings

Viewing system configuration settings

In the DR Series system GUI you can easily current system configuration settings.

To view system settings, complete the following steps.

1.
In the left navigation menu, click System Configuration.
The System Configuration page is displayed.
2.
On the System Configuration page you can view the information about your DR Series system.
◦
Active Directory—Displays the domain name of the Active Directory Service, if configured.
◦
Date and Time—Displays the mode for system date and time settings, as either Manual or NTP.
◦
Fibre Channel—Displays current fibre channel access status, as either Enabled or Disabled.
◦
Networking—Displays the following networking information for your system:
▪
Mode
▪
Hostname (FQDN)
▪
IP Address
▪
Bonding
▪
Domain Suffix
▪
Primary DNS
◦
Contact Information—Displays contact information for the administrator of your system, if configured.
◦
Email Relay Host—Displays the email relay hostname, if configured.
◦
Email Alerts—Displays the numbers of notification recipients for system alerts, if configured.
Parent topic 
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级