立即与支持人员聊天
与支持团队交流

Foglight Cost Director 6.3.0 - Release Notes

Getting started with Foglight Cost Director

Getting started with Foglight Cost Director

Contents of the release package

Foglight Cost Director 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight Cost Director release package contains the following products:

1.    Foglight Cost Director version 6.3.0

  • Cost-Director-6_3_0.car

2.    Product Documentation, including:

  • Foglight Cost Director Release Notes (this document, in HTML format)
  • Foglight Cost Director User and Administration Guide (PDF and online help)

Installation instructions

Foglight Cost Director 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

 

Foglight Cost Director can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight Cost Director:

  1. Download the following packages from Quest Support Portal:
    • Foglight Cost Director version 6.3.0 (which includes the OptimizerAutomation-6_3_0.car, Virtual-VMware-Lite-6_3_0.car, CommonAnalytics-6.3.0.car, Virtual-HyperV-Lite-6_3_0.car, Cost-Director-6_3_0.car, and Cost-Director-Lite-6_3_0.car cartridge files)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. Virtual-VMware-Lite-6_3_0.car
    2. OptimizerAutomation-6_3_0.car
    3. CommonAnalytics-6_3_0.car
    4. Virtual-HyperV-Lite-6_3_0.car
    5. Cost-Director-6_3_0.car
    6. Cost-Director-Lite-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Contents of the release package

Getting started with Foglight Cost Director

Foglight Cost Director 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight Cost Director release package contains the following products:

1.    Foglight Cost Director version 6.3.0

  • Cost-Director-6_3_0.car

2.    Product Documentation, including:

  • Foglight Cost Director Release Notes (this document, in HTML format)
  • Foglight Cost Director User and Administration Guide (PDF and online help)

Installation instructions

Foglight Cost Director 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

 

Foglight Cost Director can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight Cost Director:

  1. Download the following packages from Quest Support Portal:
    • Foglight Cost Director version 6.3.0 (which includes the OptimizerAutomation-6_3_0.car, Virtual-VMware-Lite-6_3_0.car, CommonAnalytics-6.3.0.car, Virtual-HyperV-Lite-6_3_0.car, Cost-Director-6_3_0.car, and Cost-Director-Lite-6_3_0.car cartridge files)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. Virtual-VMware-Lite-6_3_0.car
    2. OptimizerAutomation-6_3_0.car
    3. CommonAnalytics-6_3_0.car
    4. Virtual-HyperV-Lite-6_3_0.car
    5. Cost-Director-6_3_0.car
    6. Cost-Director-Lite-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Installation instructions

Getting started with Foglight Cost Director

Contents of the release package

Foglight Cost Director 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight Cost Director release package contains the following products:

1.    Foglight Cost Director version 6.3.0

  • Cost-Director-6_3_0.car

2.    Product Documentation, including:

  • Foglight Cost Director Release Notes (this document, in HTML format)
  • Foglight Cost Director User and Administration Guide (PDF and online help)

Foglight Cost Director 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

 

Foglight Cost Director can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight Cost Director:

  1. Download the following packages from Quest Support Portal:
    • Foglight Cost Director version 6.3.0 (which includes the OptimizerAutomation-6_3_0.car, Virtual-VMware-Lite-6_3_0.car, CommonAnalytics-6.3.0.car, Virtual-HyperV-Lite-6_3_0.car, Cost-Director-6_3_0.car, and Cost-Director-Lite-6_3_0.car cartridge files)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. Virtual-VMware-Lite-6_3_0.car
    2. OptimizerAutomation-6_3_0.car
    3. CommonAnalytics-6_3_0.car
    4. Virtual-HyperV-Lite-6_3_0.car
    5. Cost-Director-6_3_0.car
    6. Cost-Director-Lite-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


Additional resources

Getting started with Foglight Cost Director

Contents of the release package

Foglight Cost Director 6.3.0 is a software release, and consists of the .car file required for installation on the Management Server and the necessary documentation.

 

The Foglight Cost Director release package contains the following products:

1.    Foglight Cost Director version 6.3.0

  • Cost-Director-6_3_0.car

2.    Product Documentation, including:

  • Foglight Cost Director Release Notes (this document, in HTML format)
  • Foglight Cost Director User and Administration Guide (PDF and online help)

Installation instructions

Foglight Cost Director 6.3.0 comes pre-installed on Foglight Evolve 6.3.0.

 

Foglight Cost Director can be installed on the Foglight Management Server versions listed in the Upgrade and Compatibility section.

 

To install Foglight Cost Director:

  1. Download the following packages from Quest Support Portal:
    • Foglight Cost Director version 6.3.0 (which includes the OptimizerAutomation-6_3_0.car, Virtual-VMware-Lite-6_3_0.car, CommonAnalytics-6.3.0.car, Virtual-HyperV-Lite-6_3_0.car, Cost-Director-6_3_0.car, and Cost-Director-Lite-6_3_0.car cartridge files)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. Virtual-VMware-Lite-6_3_0.car
    2. OptimizerAutomation-6_3_0.car
    3. CommonAnalytics-6_3_0.car
    4. Virtual-HyperV-Lite-6_3_0.car
    5. Cost-Director-6_3_0.car
    6. Cost-Director-Lite-6_3_0.car

Additional resources

Additional information is available from the following:

Globalization 

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.  

This release has the following known capabilities or limitations: This release is only localized for English but does support the Unicode character set.  

 


相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级