external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Sets the domain systems associated with the Hybrid Connector.
Set-RMADHybridRecoveryOptions [-Enabled <Boolean>] [-RelayUrl <String>] [-RelayKeyName <String>]
[-RelayKey <SecureString>] [-UsePackedBackups <Boolean>] [-SkipReplication <Boolean>] [-IgnoreReadOnly]
[-WhatIf] [-Confirm] [<CommonParameters>]
Set-RMADHybridRecoveryOptions [-Enabled <Boolean>] -AADConnectHost <String>
-AADConnectCredentials <PSCredential> [-UsePackedBackups <Boolean>] [-SkipReplication <Boolean>]
[-IgnoreReadOnly] [-WhatIf] [-Confirm] [<CommonParameters>]
Sets the domain and associated systems used in the Hybrid Connector.
PS C:\>$key = ConvertTo-SecureString 'YDrMzfQWP8EliwRj41BtvNIZ4pH7i4pRW24klu8ZRcU=' -AsPlainText -Force
PS C:\>Set-RMADHybridRecoveryOptions -Enabled $true -RelayUrl 'https://relayurl' -RelayKeyName 'listenKey' -RelayKey $key -UsePackedBackups $true -SkipReplication $true
Returns: Nothing on success; otherwise an error
Credentials to connect to the Azure Active Directory Connector.
Type: PSCredential
Parameter Sets: AADConnect
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
The host where the Azure Active Directory Connector is installed.
Type: String
Parameter Sets: AADConnect
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Setting to confirm if the Hybrid Connector is enabled. Values can be $true or $false.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows you to perform the action in a console currently performing full replication.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Relay key contained in the file received from ODR. This file is down loaded from ODR when the Hybrid Connection is configured in ODR.
Type: SecureString
Parameter Sets: Relay
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Relay name contained in the file received from ODR. This file is down loaded from ODR when the Hybrid Connection is configured in ODR.
Type: String
Parameter Sets: Relay
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
The URL contained in the file received from ODR. This file is down loaded from ODR when the Hybrid Connection is configured in ODR.
Type: String
Parameter Sets: Relay
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Configures the Hybrid Connector to perform a replication via the Azure Active Directory Connector. The values can be either $true or $false.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Configures the Hybrid Connector use any unpacked backups that are available. The values can be either $true or $false.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Prompts you for confirmation before running the cmdlet.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Shows what would happen if the cmdlet runs.
The cmdlet is not run.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Sets replication properties of consoles in the replication console list.
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-FileSyncEnabled <Boolean>] [-SourceFiles <String>]
[-TargetFolder <String>] [-Id] <Int32[]> [<CommonParameters>]
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-FileSyncEnabled <Boolean>] [-SourceFiles <String>]
[-TargetFolder <String>] [-ComputerName] <String[]> [<CommonParameters>]
Set-RMADReplicationConsole [-AccessCredential <PSCredential>] [-Enabled <Boolean>]
[-FallbackCredential <PSCredential>] [-FileSyncEnabled <Boolean>] [-SourceFiles <String>]
[-TargetFolder <String>] [-InputObject] <ReplicationConsole[]> [<CommonParameters>]
Updates user credentials for connecting to a specified computer, and enables/disables the manual and scheduled replication for the console.
PS C:\> C:\>$credential = Get-Credential
C:\>Set-RMADReplicationConsole -ComputerName Hostname1 -AccessCredential $credential -Enabled $true
This command changes the credentials for accessing the console on Hostname1, and enables the replication for the console.
PS C:\> C:\>Set-RMADReplicationConsole -Id 1 -AccessCredential $credential -Enabled $true
This command changes the credentials for accessing the console with specified ID, and enables the replication for the console.
PS C:\> C:\>Set-RMADReplicationConsole -ComputerName Hostname1 -FallbackCredential $([System.Management.Automation.PSCredential]::Empty)
This command removes the fallback account for the console on Hostname1.
PS C:\> C:\>Set-RMADReplicationConsole -Id 1 -FileSyncEnabled $true -SourceFiles "C:\MyProjectFiles\*.frproj" -TargetFolder "C:\MyProjectFiles"
This command enables replication of the forest recovery project files for the console with specified ID.
Specifies the user credentials to read data from the target computer. The user must be a local Administrator on the target computer. To obtain the user credentials, create a PSCredential object using the Get-Credential cmdlet provided by Windows PowerShell. If you need to use the credentials of the currently logged in user, specify [System.Management.Automation.PSCredential]::Empty value for this parameter.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the hostname of the replication console.
Type: String[]
Parameter Sets: ComputerName
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False
Set replication item enabled.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Supplies a fallback account for replacing the account that is used by the backup schedule task. The account must have administrator privileges on the system(s) to be backed up. If you need to reset the fallback account, specify [System.Management.Automation.PSCredential]::Empty value for this parameter. You can use this parameter only when Full mode is set for the console.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Enables replication of forest recovery project files.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the ID of the replication console.
Type: Int32[]
Parameter Sets: Id
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False
Specifies the replication console object you want to update.
Type: ReplicationConsole[]
Parameter Sets: InputObject
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Specifies which forest recovery project files to replicate from the source console.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the folder to store the forest recovery project files replicated from the source console.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Sets replication schedules for a computer.
Set-RMADReplicationSchedule [-Schedules <Schedule[]>] -Credential <PSCredential> [-WhatIf] [-Confirm]
[<CommonParameters>]
Sets replication schedules with credentials for the Recovery Manager computer you specify.
PS C:\> $credential = Get-Credential
$schedule=(New-RMADSchedule -Daily -StartDate "9/20/2022 10:00" -DaysInterval 1), (New-RMADSchedule -Daily -StartDate "9/20/2022 22:00" -DaysInterval 1)
C:\PS>Set-RMADReplicationSchedule -Schedule $schedule
This example illustrates how to replicate computers by using two replication schedules. The first line of this example creates a PSCredential object. The second line of this example creates two replication schedules and stores them in the $schedule variable. One schedule invokes the replicate operation once in every two days at 10 a.m. Another schedule invokes the replicate operation once in every two days at 10 p.m. The two replication schedules become effective starting from the 20th September 2022. The third line of this example set schedules with credentials to the computer you specify.
PS C:\> $credential = Get-Credential
C:\PS>Set-RMADReplicationSchedule -Credential $credential
This command updates the credentials for an existing schedule.
Specifies the user credentials for setting the replication schedule. The user must be a local Administrator on the target computer. To obtain the user credentials, create a PSCredential object using the Get-Credential cmdlet provided by Windows PowerShell.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Causes the computer you specify to use the replication schedule you set by using the New-RMADSchedule cmdlet.
Type: Schedule[]
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Prompts for confirmation before executing the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Describes what would happen if you ran the command without actually running the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Performs the restore operation for the RMADFE project.
Start-RMADFERecovery [-Force] [-NotifyByEmail <Boolean>] [-GroupPasswords <Hashtable>] [-WhatIf] [-Confirm]
[<CommonParameters>]
This cmdlet starts the restore operation on the current RMADFE project.
PS C:\> Start-RMADFERecovery
This command performs the restore operation on the current RMADFE project.
$pwd1 = ConvertTo-SecureString "new password 1" -AsPlainText -Force
$pwd2 = ConvertTo-SecureString "new password 2" -AsPlainText -Force
$pwd3 = ConvertTo-SecureString "new password 3" -AsPlainText -Force
$passwords = @{ "Enterprise Admins"=$pwd1; "Domain Admins"=$pwd2; "Administrators"=$pwd3 }
Start-RMADFERecovery -GroupPasswords $passwords
This command performs the restore operation and resets the password for domain users in the following privileged groups: Enterprise Admins, Domain Admins, and Administrators.
Overrides restrictions that prevent the command from succeeding, apart from security settings.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Resets a password for domain users in specified privileged groups. The new password can be only used once, users must change their password after logging in with the new password. Use the Set-RMADFEDomain cmdlet to enable the password resetting before you reset the password with this parameter. The password resetting option is available only for Forest Recovery and Domain Recovery modes.
Type: Hashtable
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows notification about the recovery result by email.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Prompts for confirmation before running the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Describes what would happen if you ran the command without actually running the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© ALL RIGHTS RESERVED. 使用条款 隐私 Cookie Preference Center