external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Exports Forest Recovery certificates.
Export-RMADFERecoveryCertificate [-Path] <String> [-Password] <SecureString> [<CommonParameters>]
This cmdlet exports Forest Recovery certificates to the specified location.
You must also supply the password that is used to protect the certificates.
PS C:\> Export-RMADFERecoveryCertificate -Path C:\Certificates\RMADFeCertificates.pfx" -Password (ConvertTo-SecureString "protection password" -AsPlainText -Force)
This command exports Forest Recovery certificates to the specified location.
Specifies the password that is used to protect the Forest Recovery certificates.
Type: SecureString
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the full path to the Forest Recovery certificate file.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Export the verification result of an RMADFE project.
Export-RMADFEResult [-Results] <ProjectSummary> [-Path] <String> [[-FileType] <ExportFileType>]
[<CommonParameters>]
This cmdlet exports results after verifying all the domain controllers in a recovery project.To export the verification result, get the current status of the RMADFE project first, and then specify the file path and format to save the results of export file.
PS C:\> Open-RMADFEProject -Path C:\RMADFeProjects\SampleProject.frproj -Password (ConvertTo-SecureString "project password" -AsPlainText -Force)
Start-RMADFEVerification
$results = Get-RMADFEProject
Export-RMADFEResult -Results $results -Path "C:\result.xml"
Export-RMADFEResult -Results $results -Path "C:\result.html" -FileType Html
This example illustrates how to export verification results to an XML file and an HTML file.
The first line of this example gets the current status of the RMADFE project.
The second line of this example exports the verification results to an XML and the file path is c:\result.xml.
The third line of this example exports the verification results to an HTML file and the file path is c:\result.html.
PS C:\> Open-RMADFEProject -Path C:\RMADFeProjects\SampleProject.frproj -Password (ConvertTo-SecureString "project password" -AsPlainText -Force)
Start-RMADFEVerification
Get-RMADFEProject | Export-RMADFEResult -Path "c:\result.xml"
Get-RMADFEProject | Export-RMADFEResult -Path "c:\result.htm" -FileType Html
This example illustrates how to export verification results with the pipeline.
The first line of this example exports verification results to an XML file and saves it to c:\result.xml with the pipeline.
The second line of this example exports verification results to an HTML file and saves it to c:\result.html with the pipeline.
Specifies the format of the exported file.
Default format is XML.
Type: ExportFileType
Parameter Sets: (All)
Aliases:
Accepted values: Xml, Html, Txt, Csv
Required: False
Position: 2
Default value: Xml
Accept pipeline input: False
Accept wildcard characters: False
Specifies the path to save the results.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the current status of the RMADFE project.
Type: ProjectSummary
Parameter Sets: (All)
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Exports a backup on a Secure Storage server to a remote network share.
Export-RMADSecureStorageBackup [-InputObject] <BackupInfo[]> [-TargetRemoteFolder] <String>
[-TargetCredentials] <PSCredential> [-PassThru] [<CommonParameters>]
Export-RMADSecureStorageBackup [-Id] <Int32[]> [-TargetRemoteFolder] <String>
[-TargetCredentials] <PSCredential> [-PassThru] [<CommonParameters>]
Exports a backup on a Secure Storage server to a remote network share.
$credential = Get-Credential
$backup = Get-RMADBackup -OnlySecureStorage -ComputerName 'dc1.rmad.local' | Select-Object -First 1
Export-RMADSecureStorageBackup -InputObject $backup -TargetRemoteFolder '\\192.168.0.1\BackupsNew\Temp' -TargetCredentials $credential
$credential = Get-Credential
Export-RMADSecureStorageBackup -Id @(2, 4, 6) -TargetRemoteFolder '\\192.168.0.1\BackupsNew\Temp' -TargetCredentials $credential
Specifies the identifiers of one or more backups to export.
This parameter accepts an array of integers.
Type: Int32[]
Parameter Sets: Id
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Accepts a backup object as input to the cmdlet.
Enter a variable that contains the object or type a command or expression that gets the object.
Type: BackupInfo[]
Parameter Sets: InputObject
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
Passes the registration information for the specified backup along the pipeline.
If this parameter is omitted, the registration information is not passed along the pipeline.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credentials to access the target network location.
Type: PSCredential
Parameter Sets: (All)
Aliases:
Required: True
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Remote network share where backup should be exported.
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
Gets backups registered with Recovery Manager.
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [[-Id] <Int32[]>] [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-AfterModifiedDate <DateTime>] [-First <Int32>]
[-Skip <Int32>] [-SourceConsole <String>] [<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-Id] <Int32[]> [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-IncludeSecureStorage]
[-AfterModifiedDate <DateTime>] [-First <Int32>] [-Skip <Int32>] [-SourceConsole <String>]
[<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-Id] <Int32[]> [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-OnlySecureStorage] [-AfterModifiedDate <DateTime>]
[-First <Int32>] [-Skip <Int32>] [-SourceConsole <String>] [<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [[-Guid] <Guid[]>] [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-AfterModifiedDate <DateTime>] [-First <Int32>]
[-Skip <Int32>] [-SourceConsole <String>] [<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-Guid] <Guid[]> [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-IncludeSecureStorage]
[-AfterModifiedDate <DateTime>] [-First <Int32>] [-Skip <Int32>] [-SourceConsole <String>]
[<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-Guid] <Guid[]> [-ComputerName <String>]
[-MaxDate <DateTime>] [-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>]
[-BackupComponents <BackupComponents>] [-IncludeDeleted] [-OnlySecureStorage] [-AfterModifiedDate <DateTime>]
[-First <Int32>] [-Skip <Int32>] [-SourceConsole <String>] [<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-ComputerName <String>] [-MaxDate <DateTime>]
[-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>] [-BackupComponents <BackupComponents>]
[-IncludeDeleted] [-IncludeSecureStorage] [-AfterModifiedDate <DateTime>] [-First <Int32>] [-Skip <Int32>]
[-SourceConsole <String>] [<CommonParameters>]
Get-RMADBackup [-MinimumId <Int32>] [-Domain <String>] [-All] [-ComputerName <String>] [-MaxDate <DateTime>]
[-MinDate <DateTime>] [-Site <String>] [-CollectionId <Int32>] [-BackupComponents <BackupComponents>]
[-IncludeDeleted] [-OnlySecureStorage] [-AfterModifiedDate <DateTime>] [-First <Int32>] [-Skip <Int32>]
[-SourceConsole <String>] [<CommonParameters>]
Retrieves the backup object for the backups registered in the Recovery Manager backup registration database.
PS C:\> Get-RMADBackup | Where-Object {$_.ComputerName -eq "dc1.dom1.local"}
This command retrieves all backup objects and passes them to the Where-Object cmdlet.
The Where-Object cmdlet outputs the backup objects whose ComputerName property value is dc1.dom1.local.
PS C:\> Get-RMADBackup -Id 12345
Retrieves the backup whose identifier is 12345.
PS C:\> Get-RMADBackup | Where-Object {($_.Date -gt (Get-Date).AddDays(-5)) -and ($_.Path -like "*Toronto*")}
This command retrieves objects that represent backups created by Recovery Manager for Active Directory in the last 5 days.
The command retrieves only those backups whose file path includes the word "Toronto".
PS C:\> Get-RMADBackup -Skip 10 -First 100
This command skips the first 10 backups and starts retrieving 100 backups from the 11th one.
Retrieves the backup objects that were last modified after this date.
Type: DateTime
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
When this parameter is present, the cmdlet gets all backup objects registered in the Recovery Manager backup registration database, including those whose file is physically missing.
When this parameter is omitted, the cmdlet gets only those backup objects registered in the Recovery Manager backup registration database whose file is physically present.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects with the specified components only.
If this parameter is not specified, all backup objects are retrieved from the Recovery Manager backup registration database.
Type: BackupComponents
Parameter Sets: (All)
Aliases:
Accepted values: None, ActiveDirectory, Adam, BootFiles, CertificateServer, ClusterQuorum, EnterpriseServices, ForestRecoveryMetadata, GroupMembership, IisMetabase, PerformanceCounters, Registry, CryptoKeys, All
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects for the specified collection only.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects from the specified computer only.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects for the specified domain only.
If this parameter is not specified, all backup objects are retrieved from the Recovery Manager backup registration database.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
Specifies the GUID of the backup to get.
Type: Guid[]
Parameter Sets: Guid
Aliases:
Required: False
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Type: Guid[]
Parameter Sets: Guid_IncludeSecureStorage, Guid_OnlySecureStorage
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the identifier of the backup to get.
Type: Int32[]
Parameter Sets: Id
Aliases:
Required: False
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Type: Int32[]
Parameter Sets: Id_IncludeSecureStorage, Id_OnlySecureStorage
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
When this parameter is present, the cmdlet gets all backup objects from the Recovery Manager backup registration database, including those objects whose status has been marked as Deleted or Unregistered.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
When this parameter is present, the cmdlet gets all backup objects from the Recovery Manager backup registration database, including backups stored on Secure Storage servers.
Type: SwitchParameter
Parameter Sets: Id_IncludeSecureStorage, Guid_IncludeSecureStorage
Aliases:
Required: True
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Type: SwitchParameter
Parameter Sets: IncludeSecureStorage
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects after the specified date.
Type: DateTime
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects before the specified date.
Type: DateTime
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves backups with identifier greater than a specified number.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Return backups stored on a Secure Storage servers.
Type: SwitchParameter
Parameter Sets: Id_OnlySecureStorage, Guid_OnlySecureStorage
Aliases:
Required: True
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Type: SwitchParameter
Parameter Sets: OnlySecureStorage
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Retrieves the backup objects from the specified AD site
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Retrieves backups replicated from a specified console.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the number of backups to skip before starting retrieving.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Specifies the number of backups to retrieve.
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. 使用条款 隐私 Cookie Preference Center