立即与支持人员聊天
与支持团队交流

NetVault 13.0.3 - CLI Reference Guide

Introduction Getting started Using the command-line utilities Using the nvreport utility

nvresetdrivestats

Resets the statistics for a drive.

The option -drivename or -drivenumber must be used with ‑libraryname to specify the target drive.

nvscandrives

Displays drives that are available on a local or remote NetVault Server or Client. The output does not include drives that are added as shared devices.

The output of this command provides the drive path as it appears on the NetVault WebUI. It can be used to add a drive to an existing library configuration using the nvlibrarymodify utility. For more information about this utility, see nvlibrarymodify.

nvsetcleaninglives

Sets the number of lives for a cleaning tape in the specified library.

Before running the nvsetcleaninglives command, verify that the slot that you want to use is configured as a Cleaning Slot and a cleaning tape is placed in the slot. For more information about setting a cleaning slot, see the Quest NetVault Administrator's Guide.

nvsetdrivecleaning

Sets cleaning cycle for the specified library.

The document was helpful.

选择评级

I easily found the information I needed.

选择评级