立即与支持人员聊天
与支持团队交流

Foglight for Infrastructure 5.9.4 - User Guide

Using Foglight for Infrastructure Monitoring log files with Foglight Log Monitor Monitoring IBM PowerVM environments
Before you begin Managing PowerVM HMC agents Monitoring your PowerVM environment
Advanced system configuration and troubleshooting Reference
Foglight for Infrastructure views Foglight Log Monitor views Rules Metrics
Appendix: Building regular expressions in Foglight

MSHostedResourceGroup topology object

An object that represents a resource group, but treated as a Host, since it extends HostExtension. The WindowsAgent’s 'treatResourceGroupAsHost' boolean must be enabled in order for these to be created. Along with the MSHostedResourceGroup, a new Host object of equivalent name is created. The two objects together can be used to represent the host on which a resource group is running. The actual host running the resource group can be determined from the object’s 'activeHost' property.

The host currently hosting the resource group. If performance metrics (such as CPU metrics) should be associated with the resource group, the values on the activeHost may be helpful.

Windows®

The cluster of which the resource group is a part.

Windows

A fabricated host, with name matching that of the MSHostedResourceGroup.

Windows

The name of the hosted resource group, shared by the host property’s name. It is a combination of the clusterName and resource group name.

Windows

The name of the resource group.

Windows

Memory topology object

There is a single Memory object attached to a host that is identified by that Host instance. The name property of a Memory object is set with the constant string Memory.

The amount of memory (megabyte) installed on or allocated to the host.

AIX®

HP-UX

Linux®

Solaris®

Windows®

The amount of memory (megabyte) that is being used on the host.

AIX

HP-UX

Linux

Solaris

Windows

The amount of physical memory (Mb) used as a file system cache.

Linux1

Solaris2

The amount of memory (Mb) allocated by the kernel that cannot be paged out.

none

The rate (count/second) at which pages are being read from disk.

AIX

HP-UX

Linux

Solaris

Windows

The rate (count/second) at which pages are being written to disk.

AIX

HP-UX

Linux

Solaris

Windows

The number of pages scanned by the clock per second.(count/second)

AIX

HP-UX

Linux

Solaris

Windows

The amount of physical memory (Mb) used by the kernel for data that can be paged out.

none

The percentage of physical memory that is currently utilized.

AIX®

HP-UX

Linux

Solaris

Windows

The total amount of virtual memory (Mb) allocated on the host. This is physical memory size plus the size of the paging/swap space.

AIX

HP-UX

Solaris

The pool size of huge pages

Linux

The available pool size of huge pages

Linux

The default size of huge page

Linux


1

Collected for Linux platforms only by the UnixAgentPlus.


2

Collected for Solaris platforms only by the UnixAgentPlus.


NetworkInterface topology object

A single network interface. Multiple network interfaces can be assigned to a single host object.

The bandwidth (bit/second) of the network interface (for example, 100Mb/s).

AIX®1

HP-UX2

Linux®3

Solaris®

Windows®

The number of collisions (requiring packet resend) that occurred on the network interface. (count)

AIX

HP-UX4

Linux

Solaris

 

This value is set to Active if the interface was recently discovered and/or verified to exist. The value is set to Inactive if the interface is considered obsolete.

AIX5

HP-UX

The number (count) of inbound packets that were dropped because of errors.

AIX

HP-UX

Linux

Solaris

Windows

The number of inbound packets that were dropped even though no error that would have prevented the packet from being received was detected. (count)

HP-UX6

Linux

Windows

A unique number (> 0) identifying the interface within the device.

none

The type of interface as assigned by the Internet Assigned Numbers Authority (IANA).

AIX

HP-UX

Linux

IP address of the interface.

AIX

HP-UX

Linux

Solaris

This property is set to true if the interface is a layer 2 interface.

none

The layer 2 segment to which the interface belongs.

none

The MAC or physical address assigned to the interface.

AIX

HP-UX

Linux

Solaris

The subnet mask associated with the IP address of the interface.

AIX

HP-UX

Linux

Solaris

The network segment to which the interface belongs.

AIX

HP-UX

Solaris

The number (count) of outbound packets that could not be transmitted because of errors.

AIX

HP-UX

Linux

Solaris

Windows

The number (count) of outbound packets that were dropped even though no error that would have prevented the transmission was detected.

HP-UX7

Linux

Windows

The length of the output packet queue (count).

HP-UX8

Windows

The number of packets received on this interface (count/second).

AIX

HP-UX

Linux

Solaris

Windows

The number of packets sent on this interface (count/second).

AIX

HP-UX

Linux

Solaris

Windows

The port number associated with the interface.

none

The receive rate on this network interface (bit/second).

AIX9

HP-UX10

Linux

Solaris

Windows

The send rate on this network interface (bit/second).

AIX11

HP-UX12

Linux

Solaris

Windows

The utilization of the network interface’s bandwidth.

AIX13

HP-UX14

Linux15

Solaris

Windows


1

This metric is not available on AIX systems using non-native collectors.


2

This metric is not available on HP-UX systems using non-native collectors.


3

This metric is reported by ethtool (or, if unavailable, by mii-tool). This metric is not available for loopback interfaces. It requires use of sudo for the agent to collect. (For more information about sudo commands that require root access, see Configuring secure launcher permissions using sudo.)


4

This metric is not available on HP-UX systems using non-native collectors.


5

This metric is not available on AIX systems using native collectors.


6

This metric is not available on HP-UX systems using non-native collectors.


7

This metric is not available on HP-UX systems using non-native collectors.


8

This metric is not available on HP-UX systems using non-native collectors.


9

This metric is not available on AIX systems using non-native collectors.


10

This metric is not available on HP-UX systems using non-native collectors.


11

This metric is not available on AIX systems using non-native collectors.


12

This metric is not available on HP-UX systems using non-native collectors.


13

This metric is not available on AIX systems using non-native collectors.


14

This metric is not available on HP-UX systems using non-native collectors.


15

This metric requires bandwidth from ethtool or mii-tool. It requires use of sudo for the agent to collect. (For more information about sudo commands that require root access, see Configuring secure launcher permissions using sudo.)


NetworkInterfaceDetails topology object

This topology object houses additional metrics related to the network interface.

The number of collisions (requiring packet resend) that occurred on the network interface. (count)

AIX®

HP-UX1

Linux®

Solaris®

 


1

This metric is not available on HP-UX systems using native collectors.


相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级