Chat now with support
Chat with Support

SharePlex 11.0 - SharePlex Installation and Setup Guide

About this Guide Conventions used in this guide Revision History SharePlex pre-installation checklist Download the SharePlex installer Installation and setup for Oracle cluster Installation and setup for remote capture Install SharePlex on Linux and UNIX Assign SharePlex users to security groups Set up an Oracle environment for replication Set up replication from Oracle to a different target type Generic SharePlex demonstration-all platforms Advanced SharePlex demonstrations for Oracle Advanced SharePlex Demonstrations for PostgreSQL Solve Installation Problems Database Setup Utilities General SharePlex Utilities Uninstall SharePlex Advanced installer options Install SharePlex as root Run the installer in unattended mode SharePlex installed items

Create and populate SharePlex groups on Unix and Linux

Create and Populate SharePlex Groups on Unix and Linux

Where and when to create the SharePlex groups on Unix and Linux depends on whether you install SharePlex as a root or non-root user.

  • If you install as non-root, create the groups in the /etc/group file before you run the SharePlex installer. In a cluster, create them on all nodes.*
  • If you install SharePlex as a root user, you can direct the installer to create the groups in the /etc/group file. If you install in a cluster, the installer creates the groups on the primary node, but you must create them yourself on the other nodes.

* The groups must exist because the installer adds the SharePlex Administrator user to the spadmin group during the installation process. In a cluster, this user is only added to the primary node. You must add the SharePlex Administrator user to the other nodes.

To create the groups in /etc/group :

# groupadd spadmin

# groupadd spopr

# groupadd spview

To assign a user to a group:

  1. Open the /etc/group file.
  2. Add the Unix or Linux user name to the appropriate group. To assign a list of user names to a group, use a comma-separated list (see the following example).

    spadmin:*:102:spadmin,root,jim,jane,joyce,jerry

    If the password field is null, no password is associated with the group. In the example, the asterisk (*) represents the password, “102” represents the numerical group ID, and spadmin is the group. The group ID must be unique.

  3. Save the file.

Users can verify their authorization levels by issuing the authlevel command in sp_ctrl.

Set up an Oracle environment for replication

Contents

 

Overview

This chapter contains instructions for preparing an Oracle source or target database environment for replication. The tasks outlined in this chapter must be performed before you perform initial synchronization to start replication in your environment. Perform all tasks that apply to your data and to your replication objectives.

Set up Oracle logging to support SharePlex

Set up Oracle Logging to Support SharePlex

SharePlex captures from the online and archived Oracle redo logs. SharePlex supports redo logs and datafiles that are stored on raw devices, on filesystem devices, and ASM instances.

Enable archive logging

If the Capture process stops (or is stopped by a SharePlex user) while replication is active, Capture records its location in the redo log and continues from that point when started again. However, Capture may need to read the archive logs instead of the redo logs if the following conditions occur:

  • There is a long delay between when Capture stops and starts again, and the redo logs wrap during that time. When the archive logs are available, Capture reads through them to locate the records rhR it missed.
  • Capture loses pace with Oracle transaction activity, and the redo logs wrap before Capture catches up to Oracle.

To support uninterrupted capture when an online log is not available, archive logging must be enabled on the source system and any other system from which SharePlex will capture data, such as an intermediate system in a cascading replication strategy. Otherwise, if the online logs wrap before Capture is finished processing them, a resynchronization of the source and target data will be necessary.

To avoid Capture issues, configure archive logging to support faster and uninterrupted replication as follows:

Requirement Description
Time compression and removal properly Do not compress or remove the archive logs until SharePlex is finished processing them. Otherwise, SharePlex returns a "log wrap detected" message and will stop because it cannot process the data. To determine the current log for SharePlex, issue the show capture command with the detail option in sp_ctrl on the source system. You can compress any logs that were generated before the current one.
Specify a non-default archive location If you are storing the archive logs in a location other than the Oracle default, set the SP_OCT_ARCH_LOC parameter to the full path name of the directory where the archive logs are located. If the redo logs wrap, SharePlex searches for the archive logs in Oracle’s archive log list. If SharePlex does not find the archive log there, it searches the directory or directories specified by the SP_OCT_ARCH_LOC parameter. To have Capture go directly to the SP_OCT_ARCH_LOC location and skip the read of the Oracle log list, set the SP_OCT_CK_LOC_FIRST to 1.
Configure Capture to wait for log-management processes If using SP_OCT_ARCH_LOC and you are using an automated method to move the logs to that location, you can configure Capture to wait a certain amount of time for the move to be completed. This prevents Capture from stopping because a log it needs is not yet available. Capture waits, checks for the logs, stops if they are not yet available, and continues checking and stopping until the logs are available. To configure Capture to wait, set the SP_OCT_LOGWRAP_RESTART parameter to the number of seconds that you want Capture to wait. Monitor these processes regularly to prevent replication latency.
Disable archive logging on the target You can disable archive logging on the target systems to eliminate unnecessary Oracle activity on that system, except for high availability or peer-to-peer strategies.
Do not place logs at the root ASM location

If the database uses ASM, the Oracle redo logs (online and archive) cannot be located under the ASM root directory. SharePlex will not be able to read them at that location.

ASM raw device permission The ASM 'oracle' user must have permission to access the raw device. For example, when the raw device permission default is u:root g:disk add the 'oracle' user group 'disk'. Giving permission only to the 'grid' user is insufficient.

Configure the online logs

Ideally, the redo logs should be configured so that SharePlex can avoid reading the archive logs. In most cases, reading the online logs is faster than reading the archives. Ensure that the online redo logs are large and numerous enough to minimize processing from the archive logs. At minimum, there should be enough redo log capacity to hold several hours worth of data without wrapping.

To test an appropriate online log configuration:

In pre-production testing, you can determine if Capture is reading the archive logs by doing the following:

  1. Determine the log that SharePlex is processing by querying the SHAREPLEX_ACTID table.

    SQL> select seqno from splex.shareplex_actid

  2. Determine the log that Oracle is writing to by querying Oracle's V$LOG table.

    SQL> select sequence# from v$log where status='CURRENT'

  3. Subtract the seqno value from the sequence# value. This reveals how many logs Capture lags behind Oracle.
  4. Subtract the number of online redo logs from that value. If the number is negative, SharePlex is processing archive logs. For example, if you have 10 redo logs and SharePlex is 11 logs behind, it is processing archive logs. You can then use this result to adjust the online logging configuration.

Important: If Capture falls behind the pace at which Oracle generates redo volume, the following may apply:

  • It might be more practical to resynchronize the data instead of waiting for SharePlex to restore parity by capturing from the archive logs.
  • It is possible to run out of disk space on the source system while Capture processes and queues the operations that it missed.
  • There is the potential for SharePlex to lose information needed for Post to construct SQL statements, especially if the needed archive logs no longer are available. Always monitor disk space and latency while SharePlex is running.

Set the appropriate logging level

  • Minimal supplemental logging must be set before you activate the SharePlex replication configuration.
  • In addition to minimal supplemental logging, it is strongly recommended that you enable both primary key and unique key supplemental logging, or that you create a supplemental log group on unique columns for every table in replication. When the key column values for a row update are in the redo log, SharePlex does not have to fetch them from the database. On a busy system, this greatly improves the performance of the Read process. Some SharePlex features require primary key and unique key logging to be enabled.

    Note:

    ALTER TABLE DDL commands that change the rowid of a table can affect subsequent DML operations if the primary or unique keys of the tables in replication are not being logged. When the keys are not logged, SharePlex fetches their values based on the rowid. Any operation that changes the rowid, such as ALTER TABLE...MOVE, can cause the wrong key values to be used for subsequent DML operations.

  • If you are using vertically partitioned replication for any table, you can use table-level logging to log only the columns that you want to replicate, plus any other columns that may be referenced by them, such as foreign keys. If you are using horizontally partitioned replication for the same table, make certain that you log the columns that you specified as the filters.

Set up Oracle database objects for replication

This topic provides information about how to configure certain characteristics of Oracle database objects that you will be replicating with SharePlex.

Ensure row uniqueness

SharePlex must have a way to ensure that the row it is changing on the target is the correct one that matches the source row. This is accomplished by ensuring a one-to-one relationship through the use of keys and indexes.

The role of keys

SharePlex works fastest when there is a primary key or a unique key on all source and target tables being replicated, especially large tables and tables containing LONG columns. When choosing a key to use, SharePlex uses the best available key column in the following order of priority.

  • Primary key
  • Unique key with the fewest columns, where at least one of the columns is NOT NULL
  • Unique key with the fewest columns.

For best performance, it is recommended that you enable primary and unique key supplemental logging.

If a table does not have a primary or unique key, or if Oracle logs the wrong unique key for SharePlex, you can specify columns for SharePlex to use as a key when you create the configuration file. This is known as a key definition and is specified in the configuration file. For more information, see Define a Unique Key in the SharePlex Administration Guide.

An alternative to a key definition is to create or use a unique index based on one or more columns that establish uniqueness.

Ensure that the correct key is logged

When primary and unique key supplemental logging is enabled and a table does not have a primary key, Oracle has to decide what type of unique key to log. If the table has multiple unique keys, Oracle determines the best key to use and logs those column values for every UPDATE. If a table does not have any type of key, Oracle logs all columns that are not a LONG or a LOB.

SharePlex must also identify a key to use to replicate data. Like Oracle, SharePlex chooses a key in this order:

  • primary key if there is one
  • the best (or only) unique key if there is one
  • all the columns

If a table being replicated by SharePlex does not have a primary key, but does have multiple unique keys, it is possible that the key columns that Oracle logs are not those that SharePlex requires.

Tables without a key or unique index

If SharePlex cannot detect a key or unique index on a table, it constructs a key using all of the columns except LONGs and LOBs. This key is maintained internally and is not created on the table itself.

This is not a desirable option, because the resultant WHERE clause causes Oracle to perform a full table scan on the target table to find the row, and that significantly slows replication. Additionally, row uniqueness cannot be enforced.

For example, if there is a possibility that non-LONG columns in different rows could contain identical values, but the LONG columns could have different values, the table can be out of synchronization without being detected by you or SharePlex. The following example illustrates the problem. The rows in the table are identical except for the LONG columns, and there is no primary or unique key.

COLUMN A COLUMN B COLUMN C (LONG)
10 20 100
10 20 200
10 20 300

Suppose a user on the source system changes Column A to 15 in the first row. When constructing the SQL statement to apply the change to the target table, SharePlex constructs a key using Columns A and B (UPDATE tablename SET Column A to 15 WHERE Column A = 10 and Column B = 20) to locate the row to change. There are three rows that meet this criteria, so SharePlex could post the change to the wrong row.

Keys with nulls

If a key permits NULLs, SharePlex cannot ensure the uniqueness of a row for UPDATEs and DELETES, so there is a possibility it could change the wrong row on the target system. To control how SharePlex addresses keys that permit NULLs, set the SP_SYS_IN_SYNC parameter. See the SharePlex Reference Guide for more information.

Changes to key values

SharePlex handles changes to the value of a key column without any special settings. However, if sequences are used for keys and if there is a possibility that those values will be updated, create the sequences so that the updates cannot result in a duplication of keys on the target system. Otherwise, if a new value is used to apply an operation, and that value already exists as a key in another row in the target table, SharePlex will return unique-key constraint violations and out-of-sync errors. This type of error can happen when you update values using an “x +n” formula, where n is an incremental increase. It is possible for one of the “x +n” values to equal an existing value.

The following is an example, where the values in the key column are increased by 1:

Key_Col

1

4

5

7

SQL> update table X set a=a+1; commit

The new values become the following, and they are replicated to the target system:

Key_Col

2

5

6

8

SharePlex performs the update in the order that the operations enter the redo log:

update x set a=2 where a=1; (Succeeds)

update x set a=5 where a=4; (Fails because a value of 5 already exists.)

update x set a=6 where a=5; (Succeeds)

update x set a=8 where a=7; (Succeeds)

The pre-image value that Post uses for the target sequence is the same as the increased value replicated from the source. Oracle rejects the operation as a unique constraint violation. Another example would be a transaction that updates A to B and then updates B to C.

Important! If you plan to use peer-to-peer replication, there are additional requirements for keys. For more information, see the Configure Replication to Maintain Multiple Peer Databases section in the SharePlex Administration Guide.

Indexes

The correct use of indexes is important in a replication environment. An index maintains the integrity of the target data.

  • When replicating a source table that has a unique index, the target table also should have a unique index.
  • All large tables should have a unique index on the target system. If there is no unique index, Oracle scans the entire table in order to locate the rows to be changed by Post.
  • Some applications do not use primary key constraints, and therefore a unique index is not created by default. Often, however, there will be an index that was created, but not named, as a unique index (not using CREATE UNIQUE INDEX command), although it was created on one or more columns populated with unique values, such as a person’s name and employee identification number. If no unique index exists for a table, it is recommended that you create one or specify a user-defined key when you create the configuration file. For more information, see the Define a Unique Key section in the SharePlex Administration Guide.
  • Once you have identified or created a unique index, you can ensure that Oracle uses it by employing the hints feature of SharePlex. For more information, see the Use Oracle Index Hints section in the SharePlex Administration Guide.
  • If tables have foreign keys, make sure the appropriate columns are indexed so that modifications to the foreign keys do not cause full table scans.

  • Keep your indexes up-to-date, or it can slow the Post process. Rebuild the ones that are fragmented.

If there are too many indexes on a target table, Oracle must update them all as rows are added and deleted. This slows the entire system, including replication. Consider limiting the number of indexes to the ones that have the most utility.

For applications that perform mostly one type of DML, consider the following:

  • INSERTs: Use just a few indexes, to limit their maintenance.
  • UPDATEs: Use an index on a column that does not change after an INSERT statement.
  • DELETEs: Remove as many indexes as you can.

If you run large batch jobs that do millions of SQL operations, remove unnecessary indexes before the batch job, then rebuild them at the end. This makes SharePlex run faster, and you will have more organized indexes afterward.

Bitmap indexes

For performance purposes, avoid the use of bitmap indexes while the Post process is applying the data. These indexes can adversely affect the performance of the Post process.

If you must use bitmap indexes on target tables, weigh their benefit for queries against the their impact on the transactions applied by Post:

  • When Oracle adds, updates or deletes a bitmap entry, it effectively locks all the rows associated with the bitmap segment.
  • A bitmap segment can contain references to hundreds of rows. As a result, changes made by different Post sessions (there is a Post session for every session on the source system) can block each other if their work updates bitmap entries in the same bitmap segment.
  • To proceed, Post must detect and resolve the blocking, which delays posting significantly if the number of locks is high.
  • In general, frequent inserts by multiple concurrent sessions into a table with bitmap indexes will incur lock conflicts, but random update and delete activity on such a table will not. SharePlex follows the Oracle recommendation to have a bitmap index on a more static table.

Note: Replicating bitmap indexes is not recommended. Every time you change a table with a bitmap index, the index is rebuilt. This associated cost (Oracle time and resources) to rebuild is added to your SQL UPDATE statement.

Prevent triggers from firing on the target

DML changes resulting from a trigger firing on the source system enter the redo log and are replicated to the target database by SharePlex. Consequently, if the same trigger fires on the target system and initiates the same DML changes (which already were made through replication) there will be out-of-sync errors.

For example, if an INSERT to TableA on the source system triggers an INSERT into TableB, SharePlex replicates both INSERTs to the target system. The Post process applies the first INSERT to TableA on the target system, triggering an INSERT into TableB. Thus, when Post attempts to post the replicated INSERT to TableB, there will be a unique-key violation. The row already exists because the trigger fired for TableA.

Triggers can be handled as follows, depending on your replication strategy:

Replication strategy How to handle triggers on the target

High availability

and

Peer-to-peer

  1. Enable triggers for users other than SharePlex, either in preparation for failover or because transactions are performed on multiple source systems.
  2. Disable triggers for the SharePlex user by running the sp_add_trigger.sql script. This script puts a WHEN clause into each trigger’s procedural statement that tells it to ignore operations posted by the SharePlex user.
Reporting, data sharing, other basic one-way replication
  • Either disable triggers entirely on the target system or run the sp_add_trigger.sql script to ignore operations posted by the SharePlex user.
  • Triggers on objects not in the replication configuration can remain active.

    For important information about how to use the trigger scripts, see theSharePlex Reference Guide.

    Configure integrity constraints

    Integrity constraints have a effect on replication. Follow these guidelines to ensure that they are handled.

    Foreign key constraints

    Foreign key constraints must be disabled on the target tables. SharePlex replicates the results of the source foreign key constraints. Tables with foreign keys to one another must all be included in the replication configuration for accurate replication of the source foreign key results. All tables with referential constraints must exist in the target database. If you leave one or more out, the referential integrity could become corrupted.

    Note: If constraints are DEFERRED on the target tables, the Post transaction can fail on the constraint validation. To work around this problem, enable the SP_OPO_DISABLE_OBJNUM parameter to allow the transaction to succeed. The underlying target table still remains out-of-sync until it is resynchronized.

    ON DELETE CASCADE constraints

    SharePlex provides a feature that allows ON DELETE CASCADE constraints to remain enabled on the target tables, but it must be enabled explicitly through a parameter setting. Post detects the ON DELETE CASCADE dependencies and suppresses the posting of any replicated cascaded deletes to the child tables.

    If you do not enable this support through SharePlex you must disable these constraints manually on the target. Otherwise SharePlex replicates both the primary delete and the cascaded deletes, which results in conflicts and errors when the deletes cascade on the target.

    To enable ON DELETE CASCADE support:

    1. Enable the logging of primary keys, unique index columns, and foreign key columns on the source.
    2. Set the following SharePlex parameters:

      • SP_OPO_DEPENDENCY_CHECK parameter to 2
      • SP_OCT_REDUCED_KEY parameter to 0
      • SP_OPO_REDUCED_KEY parameter to 0, 1 or 2

    NOTE: In peer-to-peer replication, SP_OPO_REDUCED_KEY must be set to 0.

    Check constraints

    Disable check constraints on the target system. They add unnecessary overhead. These checks are redundant in a well maintained, synchronized replication environment because they are satisfied on the source system. For high-availability purposes, you can build a script that re-enables the constraints as part of the failover procedure.

    Prevent access to target objects

    In all scenarios except peer-to-peer replication, the SharePlex database user must be the only user allowed to perform DML or DDL on the target objects. If DML or DDL changes are made to target objects by other individuals, jobs or applications, the target data may no longer reflect the state of the data on the source system. For more information, see the Understand the Concept of Synchronization section in the SharePlex Administration Guide.

    Configure sequences

    SharePlex replicates changes to Oracle sequences that are made in an ALTER SEQUENCE and DROP SEQUENCE commands and during DML transactions. It may not be necessary to replicate sequences in certain replication strategies.

    • High availability: Yes

      The way that SharePlex replicates sequences allows users to begin using the failover database immediately without worrying about incrementing the sequences or reusing one.

    • Reporting, data sharing, other basic one-way replication: No

      If sequences are unnecessary on the target system, do not replicate them. It can slow down replication. Even if a sequence is used to generate keys in a source table, the sequence values are part of the key columns when the replicated rows are inserted on the target system. The sequence itself does not have to be replicated.

    • Peer-to-peer: No

      SharePlex does not support peer-to-peer replication of identical sequences. For more information, see the Configure Replication to Maintain Multiple Peer Databases section in the SharePlex Administration Guide.

    To configure sequences for replication:

    1. To replicate sequences, the supplemental logging of primary and unique keys must be enabled at the database level, or you must enable supplemental logging for primary keys on the sys.seq$ table.

    2. Use caching and set the cache to increments of at least 20. When sequences are cached, SharePlex can replicate the values as a group. When sequences are not cached, SharePlex must go to disk every time a value is obtained from the sequence, which slows replication of more critical data.
    3. To ensure the uniqueness of sequences on the target system, the start value of the target sequence must be larger than the start value of the source sequence. Use the following formula to determine the target START_WITH value:

      source_current_value+ (source_INCREMENT_BY_value x source_CACHE_value) =target_START_WITH_value

      Important! (source_INCREMENT_BY_value x source_CACHE_value) should not exceed 2 GB, or replication of sequences will fail.

    1. Specify sequences in the configuration by owner and name, as you would a table.
    1. Because changes to sequences are DDL commands, the Post process pauses all posting until the sequence update is finished. For that reason, it is recommended that you process sequences through a separate post queue from the tables, especially if the sequences are not cached. For more information, see the Configure SharePlex to Replicate Data section in the .SharePlex Administration Guide.

    SharePlex uses the ALTER SEQUENCE command to update sequences in a target database as follows:

    • Change the increment value to:

      source_INCREMENT_BY_valuexsource_CACHE_value

    • Set to NOCACHE.
    • UPDATE the sequence(s).
    • ALTER the sequence(s) again by setting the following values:

      Increment_value=source_INCREMENT_BY_value

      Cache_value=source_CACHE_value

    SharePlex treats ALTER SEQUENCE operations like a simple SELECT (UPDATE) to a sequence because the redo log records make no distinctions between the two operations.

    Related Documents

    The document was helpful.

    Select Rating

    I easily found the information I needed.

    Select Rating