Rapid Recovery 6.5 - User Guide

Interrupting or resuming DVM repository optimization

This task requires a DVM repository to exist in your Core, with a running repository optimization job.

When you initiate the Optimize Repository Job, the selected DVM repository is deduplicated. This deduplication optimization is a processor-intensive job intended to save space in the repository. For more information, see About DVM repository optimization.

Once this job has been initiated, you can interrupt the job using the following procedure. This pauses deduplication. If you have already interrupted a optimization, you can resume the process using this procedure.

Complete the steps in this procedure to interrupt or resume a repository optimization job.

1. Navigate to the Rapid Recovery Core Console.
2. On the icon bar, click (More), and then select Repositories.

   The Repositories page appears.

3. If you want to interrupt an optimization job, do the following:
   1. In the repositories summary table, from the row representing the appropriate repository, click (More options) and then select Interrupt Optimization Job.

      A warning prompt appears asking you to confirm the interruption.

   2. To confirm the interruption, click Yes.
4. If you want to resume an interrupted optimization job, do the following:
   1. In the repositories summary table, from the row representing the appropriate repository, click (More options) and then select Optimize.

      A warning prompt appears asking you to confirm the optimization.

   2. In the dialog box, select the option Continue job from the interrupted point, and then click Yes.

   The dialog box closes, and the repository optimization job resumes from the point where it was last interrupted.

Connecting to an existing repository

To perform this procedure, you must have the appropriate credentials for the original Core, and you must have the local or network path, IP address or server name.

If connecting to a DVM repository that is currently owned by another functioning Core, you must first prepare for the impending transfer of ownership. The following prerequisites apply:

• If the original Core containing the repository is functioning, temporarily stop protection of machines on that Core.
• Then, stop the Core service of the original Core while you transfer ownership.
• After connecting the repository to the new Core as described in this procedure, return to the original Core. Ensure that all machines you continue to protect have a repository associated with them.
• Then restart the Core services on the original Core.

For more information about pausing protection, see Pausing and resuming protection. For more information about shutting down and restarting the Core service, see Restarting or shutting down the Core service.

From your Rapid Recovery Core Console, you can connect to an existing repository that is currently managed in a different Core. The repository you connect to must be accessible on a shared network location, or on a storage device accessible to the second Core.

This process is useful if your original Core is down and you wish to stand up a replacement Core. If you later wish to change ownership again from the second Core to a third Core (or to the original), you can do so. The same rules apply.

Complete the following procedure to connect to an existing repository.

1. Navigate to the Rapid Recovery Core Console.
2. On the icon bar, click (More), and then select Repositories.

   The Repositories page displays.

3. To select a repository type, click the drop-down menu next to Connect to Existing.
4. In the Connect Existing DVM Repository dialog box, enter the following information for the repository you want to open, and then click Connect.

   Table 10: Open Existing DVM Repository options

   Text Box	Description
   Path	The path for the repository (for example, D:\work\machine for a local path, or \\10.10.99.155\repositories by IP address, or \\servername\sharename for a network path).
   User name	If the repository has a network path, enter the user name for logging in to the network share.
   Password	If the repository has a network path, enter the password for logging in to the network share.

   The dialog box closes, and the selected repository is added to your current Core.

5. On the Cores page of the wizard, click to select the appropriate Core, and then click Next.
6. On the Details page of the wizard, to ensure that the selected Core is the one to which you want to connect, review the displayed details, and then click Finish.

   If you see an error indicating that the selected repository is in use, log into that Core and prepare it for transferring ownership of its repository to this Core. Pause any existing protection; pause any existing replication; wait for queued jobs to complete, or cancel them. Shut down the Core services or gracefully power down the Core server, and then repeat this procedure. For more information on pausing protection, or resuming protection that is paused, see Pausing and resuming protection. For more information on pausing replication, or resuming replication that is paused, see Pausing and resuming replication. For more information about shutting down and restarting the Core service, see Restarting or shutting down the Core service.

Viewing or modifying repository details

1. Navigate to the Rapid Recovery Core Console.
2. On the icon bar, click (More), and then select Repositories.

   The Repositories page is displayed.

3. At the top of the page, under the Repositories page title, the following general actions are available:

   Table 11: Repository actions

   Option	Description
   Create	This option opens the Create Repository Wizard, a workflow that helps you define all requirements to create a new DVM repository. For more information, see Creating a DVM repository.
   Connect to Existing	This option opens the Connect Existing DVM Repository dialog box. When you provide the local or CIFS share path and connection credentials, this lets you open a repository from another Core. NOTE: This process changes ownership of the repository to your Core. For more information, see Connecting to an existing repository.
   Refresh	Refreshes the list of repositories shown on the page.

4. In the DVM Repositories pane, from the (More options) drop-down menu for any DVM repository, you can perform the following actions:

   Table 12: DVM repository options

   Option	Description
   Expand repisotiry	Expand the existing repository by adding a storage location. NOTE: Before extending a DVM repository volume, Quest recommends pausing protection and pausing all jobs (or waiting for them to complete). Then extend the volume. Finally, resume protection and any paused jobs.
   Check	Perform a repository check.
   Settings	View or modify repository settings. These settings include: Viewing the repository name Viewing or changing the maximum concurrent operations Viewing or changing a description for the repository Enabling or disabling deduplication Enabling or disabling compression for data stored in the repository
   Optimize	Perform a repository optimization job. For more information, see About DVM repository optimization.
   Delete	Delete a repository. Caution: This option completely deletes the selected DVM repository and all data it contains.

Checking a repository

Rapid Recovery lets you perform a diagnostic check of a repository volume when errors occur on the Core. Errors could be the result of the Core being improperly shut down, a repository failing to mount or unmount, a hardware failure, or other environmental, lower IP stack factors that can be exposed in Rapid Recovery functionality.

For all repository technology types, the check performs the following tasks:

• Check repository
• Mounting repository
• Loading the recovery points from repository

The check also performs the "Recalculate deduplication cache for repository" task.

1. Navigate to the Rapid Recovery Core Console.
2. On the icon bar, click (More), and then select Repositories.

   The Repositories page appears.

3. To check a repository, in any row of the summary table for any repository technology type, click (More options), and then select Check.

   The Check Repository dialog box appears.

4. In the Check Repository dialog box, confirm that you understand that all active tasks associated with this repository will be canceled and that you want to proceed.

   Active jobs are canceled and the Checking Repository job starts.