NetVault Plug-in for MySQL 11.4 - User Guide

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Phase 2: Incremental restore from Wednesday

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.

Leave all restore-related Options at their default: None of the options available on the Options tab are used.

Full restore and time-based Point-in-Time Recovery


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

In the following examples, a Full and Differential Backup scenario is in place, and the DBA wants to recover data to a specific time.

Method 1: Recovery before erroneous statement using restored Binary Logs only

The DBA must perform a recovery that restores the database up to the time right before the developer dropped the table at 8:00 P.M. on Wednesday. Therefore, the following phases would be performed:

Phase 1: Full Restore from Sunday

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to specify PIT Recovery and enable all associated options.

•

Restore and Apply Binary Logs (Used when Time or Position is already known): Selected to specify the Binary Log included in the backup for use.

•

Time Based PIT: Selected as the type.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Date/Time to “19:59” and “10 Jan 2007,” that is, one minute before 8:00 P.M. on Wednesday.

Method 2: Recovery before and after erroneous statement using restored Binary Logs only

The DBA decides to recover up to the time right before the Drop Table command was issued at 8:00 P.M. The DBA also wants to recover the transactions that occurred to the remaining tables from the time after the Orders table was dropped, and up until the end of the backed-up Binary Logs. This decision ensures that he has recovered as many of the transactions as feasible, in addition to recovering the dropped table. Therefore, the following phases would be performed:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to specify PIT Recovery and enable all associated options.

•

Restore and Apply Binary Logs (Used when Time or Position is already known): Selected to specify the Binary Log included in the backup for use.

•

Time Based PIT: Selected as the type.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Date/Time to “19:59” and “10 Jan 2007,” that is, one minute before 8:00 P.M. on Wednesday.

•

Enable Recovery After Erroneous/Bad SQL Statements: Selected to recover transactions that occurred after the Order table was dropped, entered a later time and date in the Start Date/Time. Finally, because the recovery is to be performed to the end of the restored Binary Log, the None option was selected for the Stop Date/Time.

Method 3: Recovery before erroneous statement using restored and current Binary Logs

The DBA must perform a recovery that restores the database up to the time right before the developer dropped the table at 6:00 A.M. on Thursday.

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to specify PIT Recovery and enable all associated options.

•

Restore and Apply Binary Logs (Used when Time or Position is already known): Selected to indicate that the Binary Log included in the backup is to be used.

•

Include Current Binary Logs: Selected to use the current Binary Logs to apply entries that occurred between the time the backup was completed on Wednesday, and the issuance of the Drop Table command.

•

Time Based PIT: Selected as the type.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Date/Time to “05:59” and “11 Jan 2007,” that is, one minute before 6:00 A.M. on Thursday.

Method 4: Recovery before and after erroneous statement using restored and current Binary Logs

The DBA decides to recover up to the time right before the Drop Table command was issued. The DBA also wants to recover the transactions that occurred to the remaining tables from the time after the Orders table was dropped, and up until the end of the current Binary Logs. This decision ensures that he has recovered as many of the transactions as feasible, in addition to recovering the dropped table. Therefore, the following phases would be performed:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to specify PIT Recovery and enable all associated options.

•

Restore and Apply Binary Logs (Used when Time or Position is already known): Selected to indicate that the Binary Log included in the backup is to be used.

•

Include Current Binary Logs: Selected to use the current Binary Logs to apply entries that occurred between the time the backup was completed on Wednesday, and the issuance of the Drop Table command.

•

Time Based PIT: Selected as the type.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Date/Time to “05:59” and “11 Jan 2007,” that is, one minute before 6:00 A.M. on Thursday.

•

Enable Recovery After Erroneous/Bad SQL Statements: Selected to recover transactions that occurred after the Order table was dropped, entered a later time and date in the Start Date/Time. Finally, because the recovery is to be performed to the end of the current Binary Log, the None option was selected for the Stop Date/Time.

Full restore and position-based Point-in-Time Recovery

In the following examples, a Full and Incremental Backup scenario is in place, and the DBA wants to recover data to a specific time, but use a more definitive method to define the time. This process is done using identified “position values” that exist in the MySQL Binary Logs.

Method 1: Recovery before erroneous statement using restored Binary Logs only

The DBA decides to recover up to the time right before the Drop Table command was issued. Furthermore, the DBA wants a more precise recovery, so he decides to use a position-based recovery. The following phases illustrate this process:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Phase 2: Restore backed-up Binary Logs to determine the position of the erroneous statement

In this phase, only the Binary Logs recorded in Wednesday night’s Differential Backup are restored to a temporary location. This process lets the DBA locate the specific position in the log that marks when the Orders table was dropped.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to enable this form of restore and all associated options.

•

Restore Logs to Temporary Directory to Identify Time or Position: Selected to restore only the Binary Logs included in Wednesday night’s Differential Backup.

•

Time Based PIT: Selected as the type, but left all options in the Time Based PIT Details section cleared.

Phase 3: Identify the position of the Drop Table command in the restored Binary Logs

Use the mysqlbinlog utility against the restored Binary Logs: This step is performed outside of NetVault Backup to identify the position of the Drop Table command that the DBA does not want to restore. (For information about this utility and process, see the MySQL Reference Guide.) In this process, the DBA identified the Drop Table command as log position “805” in the “MYSQLSVR-bin.000009” Binary Log that was restored to the temporary location on the MySQL Server, and both values were noted.

Phase 4: Perform the position-based PIT restore

With the position identified from the restored Binary Log, a PIT restore is then performed using Wednesday’s Differential Backup.

Select the Differential Backup performed Wednesday night: The DBA again selects the backup saveset on the Create Restore Job — Choose Saveset page that corresponds to Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to enable this form of restore and all associated options.

•

Apply Binary Logs from Temporary Directory: Selected to target the Binary Logs that were restored to the temporary location in the last phase of this procedure. Because the restored Binary Log was used to identify the specific position that the Drop Table command occupied, this option is selected to tell the plug-in to use this same Binary Log.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Position to “804,” the position in the Binary Logs that exists before the Drop Table command position identified using mysqlbinlog. The Binary Log Containing Stop Position option was used to select the Binary Log, “MYSQLSVR-bin.000009,” that was restored to the temporary directory.

Method 2: Recovery before and after erroneous statement using restored Binary Logs only

The DBA decides to recover up to the time right before the Drop Table command was issued. The DBA also wants to recover the transactions that occurred to the remaining tables from the time after the Orders table was dropped, and up until the end of the backed-up Binary Logs. Furthermore, the DBA wants a more precise recovery, so he decides to use a position-based recovery. The following phases illustrate this process:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Phase 2: Restore backed-up Binary Logs to determine the position of the erroneous statement

In this phase, only the Binary Logs recorded in Wednesday night’s Incremental Backup are restored to a temporary location. This process lets the DBA locate the specific position in the log that marks when the Orders table was dropped.

Select the Differential Backup performed Wednesday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Wednesday’s Differential Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to enable this form of restore and all associated options.

•

Restore Logs to Temporary Directory to Identify Time or Position: Selected to restore only the Binary Logs included in Wednesday night’s Differential Backup.

•

Time Based PIT: Selected as the type, but left all options in the Time Based PIT Details section cleared.

Phase 3: Identify the position of the Drop Table command in the restored Binary Logs

Phase 4: Perform the position-based PIT restore

With the position identified from the restored Binary Logs, the PIT restore is then performed using Wednesday’s Incremental Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to enable this form of restore and all associated options.

•

Enable Recovery After to Erroneous/Bad SQL Statement(s): Selected this option, and set the Start Position to “806,” the position in the Binary Logs that exists after the Drop Table command position identified using mysqlbinlog. The Binary Log Containing Stop Position option was used to select the Binary Log, “MYSQLSVR-bin.000009,” that was restored to the temporary directory. Finally, because the recovery is to be performed to the end of the named Binary Log, the None option was selected for the Stop Position.


	IMPORTANT: Stop and Start positions must be actual positions listed in a Binary Log, not arbitrary numbers that are greater than the position of the unwanted transaction.

Method 3: Recovery before erroneous statement using restored and current Binary Logs

On Thursday at 9:00 A.M., the DBA learns that users are encountering “table not found” errors for the Orders table. The DBA then learns that the table no longer exists because a developer unknowingly dropped it at 6:00 A.M. on Thursday.

The DBA must perform a recovery that restores the database up to the time right before the developer dropped the table at 6:00 A.M. on Thursday. Furthermore, the DBA wants a more precise recovery, so he decides to use a position-based recovery. The following phases illustrate this process:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.

Phase 2: Identify the position of the Drop Table command in the current Binary Logs

Use the mysqlbinlog utility against the current Binary Logs: This step is performed outside of NetVault Backup to identify the position of the Drop Table command that the DBA does not want to restore. (For information about this utility and process, see the MySQL Reference Guide.) In this process, the DBA identified the Drop Table command as log position “805” in the current Binary Log, “MYSQLSVR-bin.000009”.

Phase 3: Perform the position-based PIT restore

With the position identified from the restored Binary Logs, the PIT restore is then performed using Wednesday’s Differential Backup.


	IMPORTANT: The DBA does not have to restore Monday and Tuesday night’s Differential Backups. By choosing to perform Differential Backups, each night’s backup is cumulative, back to Sunday night’s Full Backup; that is, Wednesday night’s backup includes all the Binary Logs that were generated on Monday, Tuesday, and Wednesday — back to Sunday’s Full Backup.

Set specific options on the restore-related Options tab: The DBA sets the following options:

•

Perform PIT Recovery: Selected to enable this form of restore and all associated options.

•

Restore and Apply Binary Logs (Used when Time or Position is already known): Selected to tell the plug-in to use the Binary Log that was included in the backup.

•

Include Current Binary Logs: Selected to tell NetVault Backup to use the current Binary Logs to apply all database transactions that occurred after Wednesday night’s Differential Backup. This step recovers all transactions that occurred between the completion of the Differential Backup on Wednesday night, and the time the Drop Table command was issued.

•

Enable Recovery Prior to Erroneous/Bad SQL Statement(s): Selected this option, and set the Stop Position to “804,” the position in the current Binary Log that exists before the Drop Table command position identified using mysqlbinlog. Set Binary Log Containing Stop Position to OTHER FILE, and entered the name of the current binary file in the text box, for example, “MYSQLSVR-bin.000009.”

Method 4: Recovery before and after erroneous statement using restored and current Binary Logs

The DBA decides to recover up to the time right before the Drop Table command was issued. The DBA also wants to recover the transactions that occurred to the remaining tables from the time after the Orders table was dropped, and up until the end of the current Binary Log. Furthermore, the DBA wants a more precise recovery, so he decides to use a position-based recovery. The following phases illustrate this process:

Select the Full Backup performed Sunday night: On the Create Restore Job — Choose Saveset page, the DBA selects the backup saveset that corresponds to Sunday’s Full Backup.

Leave all restore-related Options at their default: None of these options are used.