Chat now with support
Chat with Support

Change Auditor 7.2 - SIEM Integration User Guide

Integrating Change Auditor and SIEM Tools Subscription Management
Adding the PowerShell module Viewing available commands and help Connecting to Change Auditor Managing subscriptions Working with event subscriptions in the client Managing a Splunk integration Managing an IBM QRadar integration Managing a Micro Focus Security ArcSight Logger and Enterprise Security Manager (ESM) integration Managing a Quest IT Security Search integration (Preview) Managing a Syslog integration
Webhook technical insights

Managing subscriptions

Managing subscriptions

To begin sending event data, you need to create a subscription with Change Auditor. The subscription contains information about the URL to send the notifications and heartbeats and the event subsystems to include.

* 
NOTE: You must be a member of the Change Auditor Administrators group to run these commands.
NOTE: These are generic commands not tied to a specific SIEM tool.
•
New-CAEventWebhookSubscription
•
Get-CAEventWebhookSubscriptions
•
Set-CAEventWebhookSubscription
•
Remove-CAEventWebhookSubscription
•
Get-CAEventExportSubsystems

New-CAEventWebhookSubscription

Use this command to create the subscription required to receive Change Auditor event data.

Table 2. Available parameters

Parameter
Description

-Connection

A connection obtained by using the Connect-CAClient command. See the Change Auditor Command Guide for details.

-NotificationUrl

Specifies where to send notifications. The notification URL is provided by the webhook receiver.

-Subsystems

Specifies an array of event subsystems from which to send events. This can be single or multiple subsystems.

NOTE: To obtain an array of subsystems, use the Get-CAEventExportSubsystems command and filter the list to specify the required subsystems.

-StartTimeUTC (Optional)

Specifies date and time from which events should be sent. The default is to start sending events from the time when the subscription is created.

For example:

•
20 July, 2020 12:01 PM uses local time
•
2020-07-20 12:10:00Z uses UTC time

The time will be local unless you specify the required flag to convert to UTC.

NOTE: The time cannot be more than 30 days prior to the Change Auditor installation date.

-BatchSize (Optional)

Specifies the maximum number of events to include in a single notification. The default is 10000 events.

-Enabled (Optional)

Specifies whether the subscription is enabled or disabled. By default it is enabled.

-HeartbeatUrl (Optional)

Specifies where (URL) to send heartbeat notifications. The URL is provided by the webhook receiver.

NOTE: If no value is specified, heartbeat notifications are not sent.

-NotificationInterval (Optional)

Specifies how often (in milliseconds) notifications are sent to the receiver. By default, this is set to 0, resulting in a continuous stream of events.

-HeartbeatInterval (Optional)

Specifies how often (in milliseconds) heartbeat notifications are sent to webhook receiver. By default, this is set to every 5 minutes. Setting this to 0 disables the heartbeat notifications.

-AuthorizationId (Optional)

Specifies the unique identifier used to confirm that the specified subscriber is authorized to accept event data. The Id is provided by webhook receiver.

-AllowedCoordinators (Optional)

Specifies the DNS or NetBIOS name of the coordinators permitted to send events. By default, any coordinator can send the events.

NOTE: The list order does not determine which coordinator is selected to send events.

-IncludeO365AADDetails (Optional)

Specifies whether to include the raw JSON event details provided by Microsoft. When set to true, the event will include a field named additionalDetails, containing the raw JSON string for Office 365 and Azure Active Directory events. When set to false, the additionalDetails field is not included.

By default, this is set to true.

Example: Create a subscription that sends O365, Active Directory, and Exchange events captured since March 1 to www.quest.com

$startTimeUTC = Get-Date "March 1, 2020 12:00 PM"

$notificationUrl = "https://www.quest.com/api/webhook"

$selectedSubsystems = Get-CAEventExportSubsystems -Connection $connection | Where-Object DisplayName -In -Value "Office 365", "Active Directory", "Exchange"

New-CAEventWebhookSubscription -Connection $connection -NotificationUrl $notificationUrl -StartTimeUTC $startTimeUTC -Subsystems $selectedSubsystems

Get-CAEventWebhookSubscriptions

Use this command to see the details of the current subscriptions.

Table 1. Available parameters
Parameter
Description

-Connection

A connection obtained by using the Connect-CAClient command. See the Change Auditor Command Guide for details.

-SubscriptionId (optional)

The ID of an existing webhook subscription.

If specified, the command will only return the webhook subscription with that ID. If not specified, all event subscriptions are returned,

You can find the SubscriptionId by running this command using just the connection information. It is also returned by the New-CAEventWebhookSubscription command.

Example: List defined webhook subscriptions

Get-CAEventWebhookSubscriptions -Connection $connection

Command output

The command returns the following information.

Table 2. Available configuration information
Setting
Description

Id

The subscription ID.

StartTimeUTC

Starting point in time for events being sent.

Subsystems

Subsystems that contain the event data being sent.

Enabled

Whether the subscription is enabled.

NotificationInterval

How often how often (in milliseconds) notifications are sent.

HeartbeatInterval

How often (in milliseconds) heartbeat notifications are sent.

BatchSize

Batch size. (The maximum number of events that the active batch size can increase to.)

ActiveBatchSize

The current batch size. (The current number of events to include in a single notification message.) The batch size is automatically adjusted based on network throughput and system performance. Its value never exceeds the specified batch size.

NotificationUrl

URL for event notifications.

HeartbeatUrl

URL for heartbeat notifications.

LastEventTimeUTC

When the last event was sent.

LastEventResponse

The last event response. Provides the response in JSON format from the event receiver.

LastHeartbeatTimeUTC

When the last heartbeat was sent.

LastHeartbeatResponse

Last heartbeat response.

(For example OK, HTTP 429 - Too many events being sent., and HTTP 401 - Unauthorized access.)

EventsSent

Number of events sent.

BatchesSent

Number of batches sent.

HeartbeatsSent

Number of heartbeats sent.

BookmarkTime

Time of the event that was last sent.

AllowedCoordinators

List of coordinators permitted to send events.

LastCoordinator

The coordinator that is sending events. If the subscription is disabled, this is the last coordinator that sent events.

Internal

Whether this is an internal webhook created for a particular subscription.

Set-CAEventWebhookSubscription

Use this command to edit the subscription.

Table 3. Available parameters
Parameter
Description

-Connection

A connection obtained by using the Connect-CAClient command. See the Change Auditor Command Guide for details.

-Subscription

The PSCAEventWebhookStatus object that corresponds to the subscription to modify. This parameter is required if the SubscriptionId parameter is not specified.

-SubscriptionId

The ID of the subscription to modify. This parameter is required if the Subscription parameter is not specified.

-NotificationUrl (Optional)

Specifies where to send notifications. The notification URL is provided by the webhook receiver.

-BatchSize (Optional)

Specifies the maximum number of events to include in a single notification. The default is 10000 events.

-Enabled (Optional)

Specifies whether the subscription is enabled or disabled. By default it is enabled.

-HeartbeatUrl (Optional)

Specifies where (URL) to send heartbeat notifications. The URL is provided by the webhook receiver.

NOTE: If no value is specified, heartbeat notifications are not sent.

-NotificationInterval (Optional)

Specifies how often (in milliseconds) notifications are sent to the receiver. By default, this is set to 0, resulting in a continuous stream of events.

-HeartbeatInterval (Optional)

Specifies how often (in milliseconds) heartbeat notifications are sent to webhook receiver. By default, this is set to every 5 minutes. Setting this to 0 disables the heartbeat notifications.

-AuthorizationId (Optional)

Specifies the unique identifier used to confirm that the specified subscriber is authorized to accept event data. The Id is provided by webhook receiver.

-AllowedCoordinators (Optional)

Specifies the DNS or NetBIOS name of the coordinators permitted to send events. By default, any coordinator can send the events.

NOTE: The list order does not determine which coordinator is selected to send events.

-Subsystems (Optional)

Specifies an array of event subsystems from which to send events. This can be single or multiple subsystems.

NOTE: To obtain an array of subsystems, use the Get-CAEventExportSubsystems command and filter the list to specify the required subsystems.
NOTE: The subsystems specified override the current subsystems included in the subscription.

-IncludeO365AADDetails (Optional)

Specifies whether to include the raw JSON event details provided by Microsoft. When set to true, the event will include a field named additionalDetails, containing the raw JSON string for Office 365 and Azure Active Directory events. When set to false, the additionalDetails field is not included.

By default, this is set to true.

Example: Edit a webhook subscription to send events to www.quest.com for Office 365 and Active Directory

$subscriptionId = "ed01cc15-b67f-428d-b836-25405235dd1f"

$notificationUrl = "https://www.quest.com/api/webhook"

Set-CAEventWebhookSubscription -Connection $connection -SubscriptionId $subscriptionId -NotificationUrl $notificationUrl

Example: Edit the subsystems included in a webhook subscription

$newSubsystems = Get-CAEventExportSubsystems -Connection $connection | ? { $_.DisplayName -eq "File System" -or $_.DisplayName -eq "Active Directory" }

Set-CAEventWebhookSubscription -Connection $connection -SubscriptionId cd87b774-8e65-46e1-8520-da478c60c4c3 -Subsystems $newSubsystems

Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating