Brocade Switch configuration and troubleshooting (4292670)

Configuration Flow:

Foglight -> Agent Manager(FGLAM) -> SMI-S(BNA) -> Brocade Switch

1.

1.1  Storage: How to monitor Brocade switches( This is the whole installation)

SOL190875

1.2  Please check prerequisites and make sure those are configured properly.

Then look for Foglight for Storage Management User Guide and check:
Configuring Agents to Monitor Storage Devices | Brocade SAN Switches | Requirements for Brocade SAN Switches
Configuring Agents to Monitor Storage Devices | Brocade SAN Switches | Configuring Agents to Monitor Brocade SAN Switches

2. After configured the Brocade Agent, if still there is no connectivity, first of all please use Connection Tester from FGLAM (Foglight Agent Manager) server to the SMI-S, then get the output and provide it to support for further analysis (Please see attachment for the Connection Tester). 

Extract the file and run: ConnectionTester.cmd

Note: The fglam asks for information from the BNA server on the SMIS ports. Those ports need to be opened on the BNA server for incomming traffic.