Error Code List (4240585)

INFORMATIONAL:

Error Code 200:
System not found. Scan not performed.
This indicates that the specified computer was not located and could not be scanned.

Error Code 201:
System not found. <system error message>
A network problem is preventing the specified machine from being scanned. Check to see that your computer (the scanning machine) is properly connected to the network and that you can remotely logon to the specified machine.

Error Code 202:
System not found. Scan not performed.
A network or system error occurred while the scan was in process. Check to see that your scanning machine is properly connected to the network and the machine being scanned is still connected to the network. Also ensure that the remote machine is running the Server service.

Error Code 230:
Scan not performed. <system error message>
A general network error has occurred. Please refer to the system documentation for more information.

Error Code 235:
System not found, or NetBIOS ports may be firewalled. Scan not performed.
Most likely, there is no machine with the specified IP address. If a machine does exist at this address, a personal firewall or port filtering device may be dropping packets destined for tcp ports 139 and 445.

Error Code 261:
System found but it is not listening on NetBIOS ports. Scan not performed.
A machine exists at this IP address but it is either not listening on, or is blocking access to, tcp ports 139 and 445.

Error Code 301:
SystemRoot share access required to scan.
Unable to connect to the remote machine’s system share. This may occur if the administrator has unshared the systemroot (typically C$ or similar) or has disabled the AutoShareServer(Wks) via the registry. Set Value from 0 to 1.

HKLM\\SYSTEM\\CurrentControlSet\\Services\\lanmanserver\\paratermers\\AutoShareServer

HKLM\\SYSTEM\\CurrentControlSet\\Services\\lanmanserver\\paratermers\\AutoShareWks

Check the following MS article for direction on restoring Admin Shares. http://support.microsoft.com/kb/318755

Error Code 429:
DLL is not properly registered.

Error Code 430:
Incorrect version of MDAC.

Error Code 451:
Admin rights are required to scan. Scan not performed.
The current or specified user account performing the scan does not have administrative rights to the machine being scanned. Check to see that the specified account is a member of the local administrators group on the machine being scanned (or a member of a group having local administrative rights).

Error Code 452:
Patch Authority Ultimate is unable to scan this machine. Please check to see that you have administrative rights to this machine and are able to login to this machine from your workstation. Scan not performed. Check to see that the Server service is enabled on the remote machine and that you can remotely logon to this machine. Ensure that the Workstation service is running on the machine performing the scan.

Error Code 501:
Remote registry access denied. Scan not performed.
Check to see that the Remote Registry service is enabled on the machine being scanned.

Error Code 502:
Scan not performed. Error reading Registry <system error message>
A general registry error has occurred. Please refer to the system documentation for more information.

Error Code 503:
Scan not performed. Error reading Registry.
A general registry error has occurred. No additional information is available.

Error Code 553:
Unable to read registry. Please ensure that the remote registry service is running. Scan not performed.
Check to see that the Remote Registry service is enabled on the machine being scanned.

Error Code 621:
Machine is not one of Windows (NT 4, 2000, XP or .NET). Scan not performed.
The machine being scanned does not appear to be a product supported by this tool. The specified may be a non-Microsoft platform running SMB services or otherwise emulating a Microsoft product.

Error Code 622:
Machine OS is not Recognized. Please run with tracing on and send to technical support. Scan not performed.
Unable to determine the Operating System of the specified machine. This may occur when scanning beta or unreleased versions of Microsoft Operating Systems.

Error Code 623:
Machine Service pack is not Recognized. Please run with tracing on and send to technical support. Scan not performed.
Unable to determine the Service Pack of the specified machine. This may occur when scanning beta or unreleased versions of Microsoft Service Packs.

Error Code 701:
File http://download.microsoft.com/download/xml/security/1.0/NT5/EN-US/mssecure.cab was NOT downloaded.
The signed, compressed CAB file containing the security patch information could not be obtained from the specified location. This may occur if the scanning machine is not connected to a network, or is otherwise unable to access the specified file or location. If the CAB file is not obtained, an attempt is made to access the uncompressed XML file via https.

Error Code 702:
File https://www.microsoft.com/technet/security/search/mssecure.xml was NOT downloaded. Attempting to find local copy of mssecure.cab.
The uncompressed XML file containing the security patch information could not be obtained from the specified location via https. This may occur if the scanning machine is not connected to a network, or is otherwise unable to access the specified file or location. If the XML file is not obtained from the network, an attempt is made to locate an existing version of this file on the local machine.

Error Code 799:
Itanium class servers are not support by Patch Authority Ultimate.

Error Code 802:
Could not read boot.ini file in harddrive at '%s'
\"Unable to read the image's boot.ini file after successfully mounting the hard disk (non-Vista systems).\"

Error Code 803:
Could not find windows install directory in boot.ini file in harddrive at '%s'
\"The virtual image hard drive was successfully mounted and the boot.ini file was read but the scan engine was unable to locate the %systemroot% folder at the specified location (non-Vista systems).\"

Error Code 804:
Could not find system32 directory for virtual system at '%s'
\"The virtual image hard drive was successfully mounted and the boot.ini file was read but the scan engine was unable to locate the %systemroot%\\system32 folder at the specified location (non-Vista systems).\"

Error Code 805:
Timeout when mounting hard drive at '%s' to drive '%c'
\"An attempt to mount the virtual image was not successful. The mounting process timed out after 60 seconds. Try scanning this image individually to see if the mount will succeed.\"

Error Code 806:
Error mounting hard drive at '%s' to drive '%c'
\"An attempt to mount the virtual image was not successful. This can happen if the image being mounted is encrypted, is on a compressed drive, is a template or a linked clone, or any of the vmdk files are read-only. If this is a VMware Workstation or VMware Server image, this error will occur if the image is currently powered on or suspended.\"

Error Code 807:
Error mounting hard drive at '%s' to drive '%c' with exit code %d
\"An attempt to mount the virtual image was not successful. The mounting process returned an unknown error code. Please contact support for assistance.\"

Error Code 808:
Could not get return code from mounting tool when mounting hard drive at '%s' to drive '%c' due to %s
\"The virtual image mounting process completed but the mount process was unable to determine if the mounting was successful.\"

Error Code 809:
Unknown virtual image type '%s' extracted from '%s'.
\"The scan engine was unable to determine the virtual image type. This may occur if scanning a currently unsupported virtual image platform.\"

Error Code 810:
Could not find system32 directory for virtual image: '%s'
\"The virtual image hard drive was successfully mounted but the scan engine was unable to locate the image's %systemroot%\\system32 folder.\"

Error Code 811:
Could not get information about drive mounted at '%s' for system:'%s'
\"The scan engine was unable to determine the systemroot drive letter for the mounted image.\"

Error Code 812:
Could not open mounted registry key 'HKLM\\\\Software\\\\MountedDevices' for system: '%s'
\"The virtual image hard drive and registry was successfully mounted but the scan engine was unable to read the mounted registry.\"

Error Code 813:
Could not enumerate the values under the key HKLM\\\\Software\\\\MountedDevices for system: '%s'
\"The virtual image hard drive and registry was successfully mounted but the scan engine was unable to enumerate values from the mounted registry.\"

Error Code 814:
No path to vmware-mount.exe provided!
\"The scan engine was unable to locate the VMware mounting tool. Please make sure that the VMware Virtual Disk Development Kit has been properly installed. \"

Error Code 815:
Could not find mounting tool at '%s'
\"The scan engine was unable to locate the VMware mounting tool. Please make sure that the VMware Virtual Disk Development Kit has been properly installed. \"

Error Code 816:
Could not read system file at '%s'
\"The vmx configuration file does not exist for the specified VMware Workstation or VMware Server image.\"

Error Code 817:
Error parsing system file at '%s'
\"The scan engine was unable to read the vmx file for the specified VMware Workstation or VMware Server image. Please check the vmx file and ensure that it can be read in a text viewer.\"

Error Code 818:
'%s'. Unable to mount the virtual image. The virtual image is currently powered on.
\"The scan engine was unable to mount the virtual image because the virtual image was powered on. The scan engine is only capable of scanning images that are offline (powered off).\"

Another possibility is that VMware tools is not running or installed on the client machine.

Error Code 819:
'%s'. Unknown PowerStatus '%d'
\"The scan engine was unable to determine the current state of the image (powered on, suspended, powered off).\"

Error Code 820:
%s'. Scanning suspended or paused images is not currently supported.
\"The scan engine was unable to mount the virtual image because the virtual image was suspended (paused). The scan engine is only capable of scanning images that are offline (powered off).\"

Error Code 821:
Could not open Objects key in BCD for image at '%s'
\"The scan engine was unable to access the boot configuration data (BCD) for this image. This error message could indicate that there is a problem with the specified image. Try powering on this image to ensure that it is still valid. This error message applies to Vista images only.\"

Error Code 822:
Could not enumerate keys in 'BCD\\\\Objects' for image at '%s'
\"The scan engine was unable to enumerate information from the boot configuration data (BCD) for this image. This error message could indicate that there is a problem with the specified image. Try powering on this image to ensure that it is still valid. This error message applies to Vista images only.\"

Error Code 823:
Could find default boot section in the BCD for image at '%s'
\"The scan engine was unable to enumerate boot information from the boot configuration data (BCD) for this image. This error message applies to Vista images only.\"

Error Code 824:
Could not open key at 'BCD\\\\Objects\\\\%s\\\\Elements\\\\22000002' for image at '%s'
\"The scan engine was unable to open the boot information data from the boot configuration data (BCD) for this image. This error message applies to Vista images only.\"

Error Code 825:
Could find the Windows root in default boot section of the BCD for image at '%s'
\"The scan engine was unable to locate the value which stores the location of the windows directory in the boot configuration data (BCD) for this image. This error message applies to Vista images only.\"

Error Code 826:
Registry mount sentry is NULL!
\"The scan engine was enable to mount the virtual image's registry. The console may be running low on memory.\"

Error Code 827:
Hard-drive mount sentry list is NULL or empty!
\"The scan engine was unable to read the vmx file and/or this file had no hard drives configured for the image.\"

Error Code 828:
Could not mount registry for image '%s'. This could be caused by running a non supported configuration. Windows 2000 can't mount x64 registries.
\"The scan engine was unable to mount the registry for the virtual image. This may occur if using a Windows 2000 console and trying to mount x64 images (unsupported).\"

Error Code 829: [this error can occur due to a number of different reasons. This is an error that occurs prior to mounting the image - it's not related to mounting the image, as are the above error messages. more details below]
Error: 829 - Accessing disk ID
Error: 829 - Accessing disk ID, Code:16054 – Invalid connection

/* General errors */
VIX_E_FAIL = 1,
VIX_E_OUT_OF_MEMORY = 2,
VIX_E_INVALID_ARG = 3,
VIX_E_FILE_NOT_FOUND = 4,
VIX_E_OBJECT_IS_BUSY = 5,
VIX_E_NOT_SUPPORTED = 6,
VIX_E_FILE_ERROR = 7,
VIX_E_DISK_FULL = 8,
VIX_E_INCORRECT_FILE_TYPE = 9,
VIX_E_CANCELLED = 10,
VIX_E_FILE_READ_ONLY = 11,
VIX_E_FILE_ALREADY_EXISTS = 12,
VIX_E_FILE_ACCESS_ERROR = 13,
VIX_E_REQUIRES_LARGE_FILES = 14,
VIX_E_FILE_ALREADY_LOCKED = 15,
VIX_E_NOT_SUPPORTED_ON_REMOTE_OBJECT = 20,
VIX_E_FILE_TOO_BIG = 21,
VIX_E_FILE_NAME_INVALID  

0 – VIX_OK

The operation was successful.

1 – VIX_E_FAIL

Unknown error.

2 – VIX_E_OUT_OF_MEMORY

Memory allocation failed: out of memory.

3 – VIX_E_INVALID_ARG

One of the parameters was invalid.

4 – VIX_E_FILE_NOT_FOUND

A file was not found.

5 – VIX_E_OBJECT_IS_BUSY

This function cannot be performed because the handle is executing another function.

6 – VIX_E_NOT_SUPPORTED

The operation is not supported.

7 – VIX_E_FILE_ERROR

A file access error occurred on the host or guest operating system.

8 – VIX_E_DISK_FULL

An error occurred while writing a file; the disk is full. Data has not been saved. Free some space and try again.

9 – VIX_E_INCORRECT_FILE_TYPE

An error occurred while accessing a file: wrong file type.

10 – VIX_E_CANCELLED

The operation was canceled.

11 – VIX_E_FILE_READ_ONLY

The file is write-protected.

12 – VIX_E_FILE_ALREADY_EXISTS

The file already exists.

13 – VIX_E_FILE_ACCESS_ERROR

You do not have access rights to this file.

14 – VIX_E_REQUIRES_LARGE_FILES

The file system does not support sufficiently large files.

15 – VIX_E_FILE_ALREADY_LOCKED

The file is already in use.

16 – VIX_E_VMDB

The system returned an error. Communication with the virtual machine may have been interrupted.

20 – VIX_E_NOT_SUPPORTED_ON_REMOTE_OBJECT

The command is not supported on remote objects.

21 – VIX_E_FILE_TOO_BIG

The file is too big for the filesystem.

22 – VIX_E_FILE_NAME_INVALID

The file name is not valid.

23 – VIX_E_ALREADY_EXISTS

Already exists.

24 – VIX_E_BUFFER_TOOSMALL

Buffer is too small.

25 – VIX_E_OBJECT_NOT_FOUND

The request refers to an object that no longer exists or has never existed.

26 – VIX_E_HOST_NOT_CONNECTED

Unable to connect to the host.

8 – VIX_E_INVALID_UTF8_STRING

The string parameter has incorrect encoding.

31 – VIX_E_OPERATION_ALREADY_IN_PROGRESS

Operation is already in progress.

29 – VIX_E_UNFINISHED_JOB

Job has not finished yet.

30 – VIX_E_NEED_KEY

A decryption key is needed to perform the operation.

32 – VIX_E_LICENSE

This operation is not supported with the current license.

34 – VIX_E_VM_HOST_DISCONNECTED

Unable to communicate with the virtual machine's host, since it is disconnected.

35 – VIX_E_AUTHENTICATION_FAIL

Authentication for Encrypted VM failed.

36 – VIX_E_HOST_CONNECTION_LOST

The connection to the host was lost.

1000 – VIX_E_INVALID_HANDLE

The handle is not a valid VIX object.

1001 – VIX_E_NOT_SUPPORTED_ON_HANDLE_TYPE

The operation is not supported on this type of handle.

1002 – VIX_E_TOO_MANY_HANDLES

Too many handles are open.

2000 – VIX_E_NOT_FOUND

Invalid file - a required section of the file is missing.

2001 – VIX_E_TYPE_MISMATCH

Invalid file - an object has the wrong type.

2002 – VIX_E_INVALID_XML

Invalid file - contents may be corrupt.

3000 – VIX_E_TIMEOUT_WAITING_FOR_TOOLS

Timeout error while waiting for .

3001 – VIX_E_UNRECOGNIZED_COMMAND

The command is not recognized by the virtual machine.

3003 – VIX_E_OP_NOT_SUPPORTED_ON_GUEST

The requested operation is not supported on this guest operating system.

3004 – VIX_E_PROGRAM_NOT_STARTED

A program could not run on the guest operating system.

3005 – VIX_E_CANNOT_START_READ_ONLY_VM

Cannot power on a read-only virtual machine.

3006 – VIX_E_VM_NOT_RUNNING

The virtual machine needs to be powered on.

3007 – VIX_E_VM_IS_RUNNING

The virtual machine should not be powered on. It appears to be running already.

3008 – VIX_E_CANNOT_CONNECT_TO_VM

Cannot connect to the virtual machine.

3009 – VIX_E_POWEROP_SCRIPTS_NOT_AVAILABLE

Cannot execute scripts.

3010 – VIX_E_NO_GUEST_OS_INSTALLED

No operating system installed in the virtual machine.

3011 – VIX_E_VM_INSUFFICIENT_HOST_MEMORY

Not enough physical memory is available to power on this virtual machine.

3012 – VIX_E_SUSPEND_ERROR

An error occurred while suspending the virtual machine.

3013 – VIX_E_VM_NOT_ENOUGH_CPUS

This virtual machine is configured to run with 2 CPUs, but the host only has 1 CPU. The virtual machine cannot be powered on.

3014 – VIX_E_HOST_USER_PERMISSIONS

Insufficient permissions in host operating system.

3015 – VIX_E_GUEST_USER_PERMISSIONS

Authentication failure or insufficient permissions in guest operating system.

3016 – VIX_E_TOOLS_NOT_RUNNING

are not running in the guest.

3017 – VIX_E_GUEST_OPERATIONS_PROHIBITED

Guest operations are not allowed on this virtual machine.

3018 – VIX_E_ANON_GUEST_OPERATIONS_PROHIBITED

Guest operations are not allowed for the anonymous user on this virtual machine.

3019 – VIX_E_ROOT_GUEST_OPERATIONS_PROHIBITED

Guest operations are not allowed for administrative user on this virtual machine.

3023 – VIX_E_MISSING_ANON_GUEST_ACCOUNT

The virtual machine configuration must specify guest account name to be used for anonymous guest operations.

3024 – VIX_E_CANNOT_AUTHENTICATE_WITH_GUEST

The virtual machine cannot authenticate users with guest.

3025 – VIX_E_UNRECOGNIZED_COMMAND_IN_GUEST

The command is not recognized by .

3026 – VIX_E_CONSOLE_GUEST_OPERATIONS_PROHIBITED

Guest operations are not allowed for console user on this virtual machine.

3027 – VIX_E_MUST_BE_CONSOLE_USER

The command can only be run by console user.

3028 – VIX_E_VMX_MSG_DIALOG_AND_NO_UI

The virtual machine is blocked waiting for a user operation.

3029 – VIX_E_NOT_ALLOWED_DURING_VM_RECORDING

Not allowed while the virtual machine is recording.

3030 – VIX_E_NOT_ALLOWED_DURING_VM_REPLAY

Not allowed while the virtual machine is replaying.

3031 – VIX_E_OPERATION_NOT_ALLOWED_FOR_LOGIN_TYPE

The command is not allowed by this login type.

3032 – VIX_E_LOGIN_TYPE_NOT_SUPPORTED

This login type is not supported.

3033 – VIX_E_EMPTY_PASSWORD_NOT_ALLOWED_IN_GUEST

The guest does not support empty passwords.

3034 – VIX_E_INTERACTIVE_SESSION_NOT_PRESENT

The specified guest user must be logged in interactively to perform this operation.

3035 – VIX_E_INTERACTIVE_SESSION_USER_MISMATCH

The specified guest user does not match the user currently logged in interactively.

3039 – VIX_E_UNABLE_TO_REPLAY_VM

Unable to replay the virtual machine.

3041 – VIX_E_CANNOT_POWER_ON_VM

The virtual machine could not start.

3043 – VIX_E_NO_DISPLAY_SERVER

Cannot launch the UI because no display server is present in the current environment.

3044 – VIX_E_VM_NOT_RECORDING

The operation failed because the virtual machine is not recording.

3045 – VIX_E_VM_NOT_REPLAYING

The operation failed because the virtual machine is not replaying.

4000 – VIX_E_VM_NOT_FOUND

The virtual machine cannot be found.

4001 – VIX_E_NOT_SUPPORTED_FOR_VM_VERSION

The operation is not supported for this virtual machine version.

4002 – VIX_E_CANNOT_READ_VM_CONFIG

Cannot read the virtual machine configuration file.

4003 – VIX_E_TEMPLATE_VM

Cannot perform this operation on a template virtual machine.

4004 – VIX_E_VM_ALREADY_LOADED

The virtual machine has already been loaded.

4006 – VIX_E_VM_ALREADY_UP_TO_DATE

The virtual machine is already up-to-date.

4011 – VIX_E_VM_UNSUPPORTED_GUEST

The specified guest operating system is not supported on the host that is the target of the operation.

6000 – VIX_E_UNRECOGNIZED_PROPERTY

Unrecognized handle property identifier.

6001 – VIX_E_INVALID_PROPERTY_VALUE

Invalid property value.

6002 – VIX_E_READ_ONLY_PROPERTY

Cannot change a read-only property.

6003 – VIX_E_MISSING_REQUIRED_PROPERTY

This handle is missing a required property.

6004 – VIX_E_INVALID_SERIALIZED_DATA

A serialized object is invalid and cannot be deserialized.

8000 – VIX_E_BAD_VM_INDEX

The index parameter does not correspond to a result set.

10000 – VIX_E_INVALID_MESSAGE_HEADER

A message header was corrupted or has the incorrect version.

10001 – VIX_E_INVALID_MESSAGE_BODY

A message body was corrupted or is missing.

13000 – VIX_E_SNAPSHOT_INVAL

A snapshot related error has occurred.

13001 – VIX_E_SNAPSHOT_DUMPER

Unable to open snapshot file.

13002 – VIX_E_SNAPSHOT_DISKLIB

Disk problem.

13003 – VIX_E_SNAPSHOT_NOTFOUND

The snapshot does not exist.

13004 – VIX_E_SNAPSHOT_EXISTS

The snapshot already exists.

13005 – VIX_E_SNAPSHOT_VERSION

Snapshots are not allowed on this virtual machine.

13006 – VIX_E_SNAPSHOT_NOPERM

Insufficient permissions.

13007 – VIX_E_SNAPSHOT_CONFIG

Something is wrong with the configuration file.

13008 – VIX_E_SNAPSHOT_NOCHANGE

The state of the virtual machine has not changed since the last snapshot operation.

13009 – VIX_E_SNAPSHOT_CHECKPOINT

Unable to save snapshot file.

13010 – VIX_E_SNAPSHOT_LOCKED

A snapshot operation is already in progress.

13011 – VIX_E_SNAPSHOT_INCONSISTENT

The snapshot files are in an inconsistent state.

13012 – VIX_E_SNAPSHOT_NAMETOOLONG

The filename is too long.

13013 – VIX_E_SNAPSHOT_VIXFILE

Cannot snapshot all metadata files.

13014 – VIX_E_SNAPSHOT_DISKLOCKED

One or more of the disks are busy.

13015 – VIX_E_SNAPSHOT_DUPLICATEDDISK

The virtual disk is used multiple times.

13016 – VIX_E_SNAPSHOT_INDEPENDENTDISK

Powered on snapshot are not allowed on virtual machines with indpendent disks.

13017 – VIX_E_SNAPSHOT_NONUNIQUE_NAME

The name does not uniquely identify one snapshot.

13018 – VIX_E_SNAPSHOT_MEMORY_ON_INDEPENDENT_DISK

Failed to take a memory snapshot, since the virtual machine is configured with independent disks.

13019 – VIX_E_SNAPSHOT_MAXSNAPSHOTS

Exceeded the maximum number of permitted snapshots.

13020 – VIX_E_SNAPSHOT_MIN_FREE_SPACE

Available free space is less than configured minimum free space.

13021 – VIX_E_SNAPSHOT_HIERARCHY_TOODEEP

Snapshot hierarchy is too deep.

14003 – VIX_E_HOST_DISK_INVALID_VALUE

The specified device is not a valid physical disk device.

14004 – VIX_E_HOST_DISK_SECTORSIZE

Disk sector size check failed.

14005 – VIX_E_HOST_FILE_ERROR_EOF

Read beyond the end of file.

14006 – VIX_E_HOST_NETBLKDEV_HANDSHAKE

Error in protocol.

14007 – VIX_E_HOST_SOCKET_CREATION_ERROR

Unable to create socket.

14008 – VIX_E_HOST_SERVER_NOT_FOUND

The specified server could not be contacted.

14009 – VIX_E_HOST_NETWORK_CONN_REFUSED

The server refused connection.

14010 – VIX_E_HOST_TCP_SOCKET_ERROR

There was an error in communication.

14011 – VIX_E_HOST_TCP_CONN_LOST

The connection was lost.

14012 – VIX_E_HOST_NBD_HASHFILE_VOLUME

NBD_ERR_HASHFILE_VOLUME.

14013 – VIX_E_HOST_NBD_HASHFILE_INIT

NBD_ERR_HASHFILE_INIT.

16000 – VIX_E_DISK_INVAL

One of the parameters supplied is invalid.

16001 – VIX_E_DISK_NOINIT

The disk library has not been initialized.

16002 – VIX_E_DISK_NOIO

The called function requires the virtual disk to be opened for I/O.

16003 – VIX_E_DISK_PARTIALCHAIN

The called function cannot be performed on partial chains. Please open the parent virtual disk.

16006 – VIX_E_DISK_NEEDSREPAIR

The specified virtual disk needs repair.

16007 – VIX_E_DISK_OUTOFRANGE

You have requested access to an area of the virtual disk that is out of bounds.

16008 – VIX_E_DISK_CID_MISMATCH

The parent virtual disk has been modified since the child was created.

16009 – VIX_E_DISK_CANTSHRINK

The specified virtual disk cannot be shrunk because it is not the parent disk.

16010 – VIX_E_DISK_PARTMISMATCH

The partition table on the physical disk has changed since the disk was created. Remove the physical disk from the virtual machine, then add it again.

16011 – VIX_E_DISK_UNSUPPORTEDDISKVERSION

than the version supported by this program.

16012 – VIX_E_DISK_OPENPARENT

The parent of this virtual disk could not be opened.

16013 – VIX_E_DISK_NOTSUPPORTED

The specified feature isn't supported by this version.

16014 – VIX_E_DISK_NEEDKEY

One or more required keys were not provided.

16015 – VIX_E_DISK_NOKEYOVERRIDE

Won't create unencrypted child of encrypted disk without explicit request.

16016 – VIX_E_DISK_NOTENCRYPTED

Not an encrypted disk.

16017 – VIX_E_DISK_NOKEY

No keys supplied for encrypting disk.

16018 – VIX_E_DISK_INVALIDPARTITIONTABLE

The partition table is invalid.

16019 – VIX_E_DISK_NOTNORMAL

Only sparse extents with embedded descriptors may be encrypted.

16020 – VIX_E_DISK_NOTENCDESC

Not an encrypted descriptor file.

16022 – VIX_E_DISK_NEEDVMFS

File system isn't VMFS.

16024 – VIX_E_DISK_RAWTOOBIG

The physical disk is too big. The maximum size allowed is 2TB.

16027 – VIX_E_DISK_TOOMANYOPENFILES

The host's limit for open files has been exceeded.

16028 – VIX_E_DISK_TOOMANYREDO

Too many levels of redo logs.

16029 – VIX_E_DISK_RAWTOOSMALL

The physical disk is too small.

16030 – VIX_E_DISK_INVALIDCHAIN

Invalid disk chain: cannot mix hosted and managed style disks in the same chain.

16052 – VIX_E_DISK_KEY_NOTFOUND

The specified key is not found in the disk data base.

16053 – VIX_E_DISK_SUBSYSTEM_INIT_FAIL

One or more required subsystems failed to initialize.

16054 – VIX_E_DISK_INVALID_CONNECTION

Invalid connection handle.

16061 – VIX_E_DISK_ENCODING

Disk Encoding error.

16062 – VIX_E_DISK_CANTREPAIR

Disk is corrupted and unrepairable.

16063 – VIX_E_DISK_INVALIDDISK

The specified file is not a virtual disk.

16064 – VIX_E_DISK_NOLICENSE

Host is not licensed for this feature.

16065 – VIX_E_DISK_NODEVICE

Device does not exist.

16066 – VIX_E_DISK_UNSUPPORTEDDEVICE

Operation is not supported on this type of device.

17000 – VIX_E_CRYPTO_UNKNOWN_ALGORITHM

Security library error.

17001 – VIX_E_CRYPTO_BAD_BUFFER_SIZE

Security library error.

17002 – VIX_E_CRYPTO_INVALID_OPERATION

Security library error.

17003 – VIX_E_CRYPTO_RANDOM_DEVICE

Security library error.

17004 – VIX_E_CRYPTO_NEED_PASSWORD

Password required for this operation.

17005 – VIX_E_CRYPTO_BAD_PASSWORD

Incorrect password.

17006 – VIX_E_CRYPTO_NOT_IN_DICTIONARY

Security library error.

17007 – VIX_E_CRYPTO_NO_CRYPTO

Security library error.

17008 – VIX_E_CRYPTO_ERROR

Security library error.

17009 – VIX_E_CRYPTO_BAD_FORMAT

Security library error.

17010 – VIX_E_CRYPTO_LOCKED

Security library error.

17011 – VIX_E_CRYPTO_EMPTY

Security library error.

17012 – VIX_E_CRYPTO_KEYSAFE_LOCATOR

Security library error.

18000 – VIX_E_CANNOT_CONNECT_TO_HOST

Cannot connect to host.

18001 – VIX_E_NOT_FOR_REMOTE_HOST

This feature can only be supported on local host.

18002 – VIX_E_INVALID_HOSTNAME_SPECIFICATION

Malformed hostname parameter. For the given service provider, the hostname must be a URL, in the form https://:/sdk.

19000 – VIX_E_SCREEN_CAPTURE_ERROR

Could not capture screen.

19001 – VIX_E_SCREEN_CAPTURE_BAD_FORMAT

Requested unsupported format.

19002 – VIX_E_SCREEN_CAPTURE_COMPRESSION_FAIL

Could not compress screen capture.

19003 – VIX_E_SCREEN_CAPTURE_LARGE_DATA

The screen capture data is larger than the given maximum size.

20000 – VIX_E_GUEST_VOLUMES_NOT_FROZEN

Drives are not frozen.

20001 – VIX_E_NOT_A_FILE

The object is not a file.

20002 – VIX_E_NOT_A_DIRECTORY

The object is not a directory.

20003 – VIX_E_NO_SUCH_PROCESS

No such process.

20004 – VIX_E_FILE_NAME_TOO_LONG

File name too long.

21000 – VIX_E_TOOLS_INSTALL_NO_IMAGE

No .

21001 – VIX_E_TOOLS_INSTALL_IMAGE_INACCESIBLE

The .

21002 – VIX_E_TOOLS_INSTALL_NO_DEVICE

The guest operating system does not have a device configured for the .

21003 – VIX_E_TOOLS_INSTALL_DEVICE_NOT_CONNECTED

The guest operating system device used for installation of .

21004 – VIX_E_TOOLS_INSTALL_CANCELLED

The .

21005 – VIX_E_TOOLS_INSTALL_INIT_FAILED

The .

21006 – VIX_E_TOOLS_INSTALL_AUTO_NOT_SUPPORTED

The .

21007 – VIX_E_TOOLS_INSTALL_GUEST_NOT_READY

are not running in the guest; auto-upgrade not possible.

21008 – VIX_E_TOOLS_INSTALL_SIG_CHECK_FAILED

The .

21009 – VIX_E_TOOLS_INSTALL_ERROR

The .

21010 – VIX_E_TOOLS_INSTALL_ALREADY_UP_TO_DATE

are already up to date.

21011 – VIX_E_TOOLS_INSTALL_IN_PROGRESS

A .

22001 – VIX_E_WRAPPER_WORKSTATION_NOT_INSTALLED

Service type VIX_SERVICEPROVIDER_VMWARE_WORKSTATION was specified, but not installed.

22002 – VIX_E_WRAPPER_VERSION_NOT_FOUND

The specified version was not found.

22003 – VIX_E_WRAPPER_SERVICEPROVIDER_NOT_FOUND

The specified service provider was not found.

22004 – VIX_E_WRAPPER_PLAYER_NOT_INSTALLED

Service type VIX_SERVICEPROVIDER_VMWARE_PLAYER was specified, but not installed.

22005 – VIX_E_WRAPPER_RUNTIME_NOT_INSTALLED

Cannot find support libraries; Vix appears to have not been installed.

22006 – VIX_E_WRAPPER_MULTIPLE_SERVICEPROVIDERS

Cannot connect with multiple service providers.

24000 – VIX_E_MNTAPI_MOUNTPT_NOT_FOUND

Could not find the specified mountpoint.

24001 – VIX_E_MNTAPI_MOUNTPT_IN_USE

The mountpoint is already in use.

24002 – VIX_E_MNTAPI_DISK_NOT_FOUND

Could not find the specified virtual disk.

24003 – VIX_E_MNTAPI_DISK_NOT_MOUNTED

The specified disk is not mounted.

24004 – VIX_E_MNTAPI_DISK_IS_MOUNTED

The specified disk is already mounted.

24005 – VIX_E_MNTAPI_DISK_NOT_SAFE

It is not safe to mount the virtual disk. It may be attached to a suspended or powered-on VM, or it may be inside a snapshot chain.

24006 – VIX_E_MNTAPI_DISK_CANT_OPEN

Cannot open the virtual disk.

24007 – VIX_E_MNTAPI_CANT_READ_PARTS

Cannot read or parse the partition table on the virtual disk.

24008 – VIX_E_MNTAPI_UMOUNT_APP_NOT_FOUND

Could not find the umount application in a standard system directory such as /bin /usr/bin or /sbin.

24009 – VIX_E_MNTAPI_UMOUNT

umount command failed.

24010 – VIX_E_MNTAPI_NO_MOUNTABLE_PARTITONS

The virtual disk does not have any partitions that the host system knows how to mount.

24011 – VIX_E_MNTAPI_PARTITION_RANGE

An invalid partition number was specified.

24012 – VIX_E_MNTAPI_PERM

Insufficient permissions to perform this operation.

24013 – VIX_E_MNTAPI_DICT

Error accessing metadata. You may not have sufficient permission to access this disk or the metadata may be corrupted.

24014 – VIX_E_MNTAPI_DICT_LOCKED

The metadata for this disk is locked. Please check for other virtual disk mounter applicaitons running.

24015 – VIX_E_MNTAPI_OPEN_HANDLES

Another process is performing an operation on this mounted virtual disk.

24016 – VIX_E_MNTAPI_CANT_MAKE_VAR_DIR

Cannot create directory '/var/run/vmware/fuse'.

24017 – VIX_E_MNTAPI_NO_ROOT

This application must be run setuid root.

24018 – VIX_E_MNTAPI_LOOP_FAILED

A loop device operation failed.

24019 – VIX_E_MNTAPI_DAEMON

The VMware fuse daemon failed to start.

24020 – VIX_E_MNTAPI_INTERNAL

An internal error has occurred. Please contact VMware support.

24021 – VIX_E_MNTAPI_SYSTEM

A system call has failed.

24022 – VIX_E_MNTAPI_NO_CONNECTION_DETAILS

Unable to get vixDiskLib connection details.

24300 – VIX_E_MNTAPI_INCOMPATIBLE_VERSION

The product version number is less than the expected version number.

24301 – VIX_E_MNTAPI_OS_ERROR

The was an operating system specific error.

24302 – VIX_E_MNTAPI_DRIVE_LETTER_IN_USE

The specified drive letter is already in use.

24303 – VIX_E_MNTAPI_DRIVE_LETTER_ALREADY_ASSIGNED

The specified drive letter is already assigned.

24304 – VIX_E_MNTAPI_VOLUME_NOT_MOUNTED

The specified volume is not mounted.

24305 – VIX_E_MNTAPI_VOLUME_ALREADY_MOUNTED

The specified volume is already mounted.

24306 – VIX_E_MNTAPI_FORMAT_FAILURE

Unable to format volume.

24307 – VIX_E_MNTAPI_NO_DRIVER

Driver not found.

24308 – VIX_E_MNTAPI_ALREADY_OPENED

A handle to the Volume or DiskSet is already open.

24309 – VIX_E_MNTAPI_ITEM_NOT_FOUND

Invalid file - a required section of the file is missing.

24310 – VIX_E_MNTAPI_UNSUPPROTED_BOOT_LOADER

Boot loader not supported.

24311 – VIX_E_MNTAPI_UNSUPPROTED_OS

The current operating system is not supported.

24312 – VIX_E_MNTAPI_CODECONVERSION

Error converting string.

24313 – VIX_E_MNTAPI_REGWRITE_ERROR

There was an error writing to the registry.

24314 – VIX_E_MNTAPI_UNSUPPORTED_FT_VOLUME

Windows NT4 Fault Tolerant volume type is not supported.

24315 – VIX_E_MNTAPI_PARTITION_NOT_FOUND

The specified partition was not found.

24316 – VIX_E_MNTAPI_PUTFILE_ERROR

Putfile error.

24317 – VIX_E_MNTAPI_GETFILE_ERROR

Getfile error.

24318 – VIX_E_MNTAPI_REG_NOT_OPENED

Unable to open registry key.

24319 – VIX_E_MNTAPI_REGDELKEY_ERROR

There was an error deleting the registry key.

24320 – VIX_E_MNTAPI_CREATE_PARTITIONTABLE_ERROR

There was an error while creating the partition table.

24321 – VIX_E_MNTAPI_OPEN_FAILURE

Failed to open DiskSet.

24322 – VIX_E_MNTAPI_VOLUME_NOT_WRITABLE

The volume is write-protected.

30001 – VIX_E_NET_HTTP_UNSUPPORTED_PROTOCOL

The URL you passed in used a protocol that is not supported.

30003 – VIX_E_NET_HTTP_URL_MALFORMAT

The URL was not properly formatted.

30005 – VIX_E_NET_HTTP_COULDNT_RESOLVE_PROXY

Failed to resolve proxy.

30006 – VIX_E_NET_HTTP_COULDNT_RESOLVE_HOST

Failed to resolve host.

30007 – VIX_E_NET_HTTP_COULDNT_CONNECT

Failed to connect to host or proxy.

30022 – VIX_E_NET_HTTP_HTTP_RETURNED_ERROR

Server returned HTTP error code >= 400.

30028 – VIX_E_NET_HTTP_OPERATION_TIMEDOUT

Network operation timed out.

30035 – VIX_E_NET_HTTP_SSL_CONNECT_ERROR

A problem occurred during the SSL/TLS handshake.

30047 – VIX_E_NET_HTTP_TOO_MANY_REDIRECTS

Hit the maximum number of redirects.

30200 – VIX_E_NET_HTTP_TRANSFER

Failure sending/receiving network data.

30201 – VIX_E_NET_HTTP_SSL_SECURITY

An SSL error occurred.

30202 – VIX_E_NET_HTTP_GENERIC

A generic HTTP error occurred.