サポートと今すぐチャット
サポートとのチャット

SharePlex 9.2.7 - Installation and Setup for Oracle Source

About this Guide Conventions used in this guide SharePlex pre-installation checklist Download the SharePlex installer Installation and setup for Oracle cluster Installation and setup for remote capture Install SharePlex on Linux and UNIX Install SharePlex on Windows Assign SharePlex users to security groups Set up an Oracle environment for replication Set up replication from Oracle to a different target type Generic SharePlex demonstration-all platforms Advanced SharePlex demonstrations for Oracle Solve Installation Problems Database Setup Utilities General SharePlex Utilities Uninstall SharePlex Advanced installer options Install SharePlex as root Run the installer in unattended mode SharePlex installed items

SQL Server Setup (mss_setup)

Overview

Run the Database Setup utility for SQL Server (mss_setup) on a Microsoft SQL Server system to establish SharePlex as a SQL Server database user. This utility creates the following:

  • A SharePlex user account with full DBA privileges
  • Tables and indexes for use by SharePlex and owned by the SharePlex user in a database of your choosing
  • A default database connection.

Supported databases

Microsoft SQL Server on Windows

Guidelines for use

  • A system DSN (data source name) must exist for the SQL Server database. SharePlex Post uses the DSN to connect to the database through ODBC.
  • Run the Database Setup utility on all SQL Server instances in the SharePlex replication configuration.
  • Within a cluster, run the Database Setup utility on the node to which the shared disk that contains the variable-data directory is mounted.
  • For consolidated replication, run the Database Setup utility for each variable-data directory.

Required privileges

Review the following requirements to ensure that the setup succeeds.

  • The Database Setup utility must be run as a SQL Server System Administrator in order to grant SharePlex the required privileges to operate on the database and to create the SharePlex database account and objects.

  • (Cloud installations) Common restrictions on privileges in cloud-hosted database services make it difficult for the setup utility to succeed in every possible type of scenario. To ensure that the database setup succeeds, only use the setup utility for the following purposes: To do a first-time database setup with a new SharePlex user, or, to modify an existing SharePlex user that either owns the database or has access to it.

Run Database Setup for SQL Server

  1. Shut down any running SharePlex processes and sp_cop on the SQL Server system.

  2. Run the mss_setup program from the bin subdirectory of the SharePlex product directory.

    Important! If you installed the SharePlex instance on any port other than the default of 2100, use the -p option to specify the port number. For example, in the following command the port number is 9400.

    C:\users\splex\bin> mss_setup -p9400

Table 9: Setup prompts and responses

Prompt Response

Enter the Microsoft SQL Server DSN name [] :

Enter the data source name (DSN) that connects to SQL Server. Make certain the DSN is a system DSN, not a user DSN.

Enter the Microsoft SQL Server Administrator name :

Enter the name of the SQL Server Administrator. This user will perform the setup work on the SharePlex account and schema.

Enter the password for the Administrator account :

Enter the password of the Administrator.

Enter the database name:

Enter the name of the database where you want to install the SharePlex objects.

Database name database does not exist. Would you like to create it? [y] :

If this prompt is displayed, the specified database does not exist. Press Enter to have the setup utility create it for you.

Would you like to create a new SharePlex login [y]:

Press Enter to accept the default to create a new SharePlex database user account, or enter n to use an existing account as the SharePlex database user.

Enter the name of the existing SharePlex login:

Enter the name of the new SharePlex login:

One of these prompts is displayed depending on whether you elected to create a new user or use an existing user. Enter the name of the SharePlex user.

 

Enter the password for login:

Enter the password of the SharePlex user account.

Re-enter the password for login :

Enter the SharePlex password again.

Will this database be used as a source?

Accept the default of n if the database will only be a target. Enter y if this database will be a source database for SharePlex. A response of y prompts the setup to prepare the database for data capture and installs the SharePlex account and objects.

A successful setup terminates with a message similar to the following:

Completed SharePlex for Microsoft SQL Server database configuration

SharePlex User name: splex

Database name: db1

Target specification in SharePlex configuration: r.db1

Teradata Setup (td_setup)

Overview

Run the Database Setup utility for Teradata (td_setup) on a Teradata system to establish a user account and database for use by SharePlex.

Supported databases

Teradata on supported platforms

Requirements for use

  • You can provide a connection string for the database, or you can use an ODBC Data Source Name (DSN). See the Teradata ODBC documentation for instructions if you want to use a DSN.
  • Run the setup utility on all target Teradata instances in the SharePlex replication configuration.
  • Within a server cluster, run the setup utility on the node to which the shared disk that contains the SharePlex variable-data directory is mounted.
  • For consolidated replication, run the setup utility for each variable-data directory on the Teradata target.

Required privileges

The setup utility must be run as a Teradata Administrator in order to grant SharePlex the required privileges to operate on the database and to create the SharePlex database account.

Run Database Setup for Teradata

  1. Shut down any running SharePlex processes and sp_cop on the target system.

  2. Run the td_setup program from the bin subdirectory of the SharePlex product directory.

    Important! If you installed the SharePlex instance on any port other than the default of 2100, use the ‑p option to specify the port number. For example, in the following command the port number is 9400.

    $/users/splex/bin> td_setup ‑p9400

Table 10: Setup Prompts and Responses

Prompt Response

Please enter the full directory path of the Teradata ODBC driver:

 Enter the full path to the Teradata ODBC driver library. This step initializes the driver location within the setup utility so that the rest of the setup can take place. It requires a second running of the setup utility to complete the setup steps.

Please run td_setup again to create the tables, login and user accounts needed to run SharePlex replication.

Run the setup utility again, including the port number if you installed SharePlex on any port other than 2100:

$/users/splex/bin> td_setup -p9400

Enter the Teradata DSN name or connection string[]:

 Enter the Data Source Name that connects to Teradata.

Enter the Teradata Administrator name:

 Enter the name of the Teradata Administrator. This user will perform the work on the SharePlex account.

Enter the password for the Administrator account:

 Enter the password of the Administrator.

Would you like to create a new SharePlex user [y]:

Press Enter to accept the default to create a new SharePlex database user account or enter n to use an existing SharePlex account.

Enter the name of the new SharePlex user:

(or...)

Enter the name of the existing SharePlex user:

Enter the name of the new or existing SharePlex user, depending on which option you chose in the previous step.

 

Enter the password for new SharePlex user:

(or...)

Enter the password for existing SharePlex user:

Enter the password of the new or existing SharePlex user account.

Re-enter the password for new SharePlex user:

 This prompt is only shown if you created a new user. Enter the SharePlex password again.

Enter the name of the database:

Accept the default or enter a different name for the database.

Database name database does not exist. Would you like to create it? [y]:

If this prompt is displayed, the specified database does not exist. Press Enter to have the setup utility create it for you.

A successful setup terminates with a message similar to the following:

Completed SharePlex for Teradata database configuration

SharePlex User name: splex

Database name: splex

Target specification in SharePlex configuration: r.splex

Grant additional database privileges

The setup utility creates the following objects:

  • a database user by which SharePlex Post will operate (which also owns a database)
  • a database into which SharePlex can install its internal objects (which can be the database owned by the SharePlex Post user or a different one)

The setup utility then prompts you to specify any additional Teradata databases that you want to include as replication targets. For each of those databases, the utility issues the following grant to the SharePlex user:

grant all on database to SharePlex_user;

Tibero Setup (tb_setup)

Overview

Run the Database Setup utility for Tibero (tb_setup) on a Tibero system to establish SharePlex as a Tibero database user. This utility creates the following:

  • A SharePlex user account with full DBA privileges
  • Tables and indexes for use by SharePlex and owned by the SharePlex user in a database of your choosing
  • A default database connection.

Supported databases

For supported Linux platforms and versions, see the SharePlex Release Notes.

Guidelines for use

  • Run the setup utility on all Tibero instances in the SharePlex replication configuration.
  • Within a cluster, run the setup utility on the node to which the shared disk that contains the SharePlex variable-data directory is mounted.
  • For consolidated replication, run the setup utility for each variable-data directory.

Required privileges

The setup utility must be run as a Tibero Administrator that retains all of that user's default privileges. The Administrator user is able to grant SharePlex the required privileges to operate on the database and to create the SharePlex database account and objects.

Run Database Setup for Tibero

  1. Shut down any running SharePlex processes and sp_cop on the Tibero system.

  2. Run the tb_setup program from the bin subdirectory of the SharePlex product directory.

    Important! If you installed the SharePlex instance on any port other than the default of 2100, use the -p option to specify the port number. For example, in the following command the port number is 9400.

    C:\users\splex\bin> tb_setup -p9400

Table 11: Setup prompts and responses

Prompt Response

Enter the Tibero DSN name or connection string [] :

Enter a connection string that connects to the Tibero database.


Enter the Tibero Administrator name :

Enter the name of the Tibero Administrator. This user will perform the setup work on the SharePlex account and schema.

Enter the password for the Administrator account :

NOTE:User 'shareplex' does not have the superuser role.

Enter the password of the Administrator.

Enter the replication target database name :

Enter the name of the Tibero database where you want to install the SharePlex objects.

Database name database does not exist. Would you like to create it? [y] :

If this prompt is displayed, the specified database does not exist. Press Enter to have the setup utility create it for you.

Would you like to create a new SharePlex user [y]:

Press Enter to accept the default to create a new SharePlex database user account, or enter n to use an existing account as the SharePlex database user.

Enter the name of the new SharePlex user:

Enter the name of the existing SharePlex user:

One of these prompts is displayed depending on whether you elected to create a new user or use an existing user. Enter the name of the SharePlex user.

 

Enter the password for the SharePlex user :

Enter the password of the SharePlex user account.

Re-enter the password for the SharePlex user :

 Enter the SharePlex password again.

A successful setup terminates with a message similar to the following:

Completed SharePlex for Tibero database configuration

SharePlex User name: splex

Database name: tbl29

Target specification in SharePlex configuration: r.tbl29

General SharePlex Utilities

The SharePlex utilities help you configure, test, and manage the SharePlex environment.

Contents
関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択