サポートと今すぐチャット
サポートとのチャット

NetVault 13.1.2 - CLI Reference Guide

Introduction Getting started Using the command-line utilities Using the nvreport utility

nvclientremove

Description

Removes a client from the NetVault Server. You must run this utility on the NetVault Server.

Syntax
nvclientremove [-client <NetVault name of the client>] [-version]
Options
 
Table 8. nvclientremove
Option
Description

-client

Specifies NetVault name of the client that you want to remove. You can only specify a single client name with this option.

-version

Displays build date of the NetVault distribution installed on the machine.

Device-specific utilities

 
•
asf_load_media
•
nvcloseeeportcleaning
•
nvopeneeport
•
asf_release_drive
•
nvdav
•
nvremovefiler
•
nvacslsmedia
•
nvrda
•
nvresetdrivestats
•
nvaddfiler
•
nvddboost
•
nvscandrives
•
nvcheckdrive
•
nvdevice
•
nvsetcleaninglives
•
nvcleandrive
•
nvdeviceeject
•
nvsetdrivecleaning
•
nvclosedoor
•
nvlibrarymodify
•
nvsmartdisk
•
nvcloseeeport
•
nvopendoor
•
nvsvtlgrow

asf_load_media

Description

Loads the specified media into the drive and locks it in the drive as Windows Advanced System Format (ASF) media.

Syntax
asf_load_media -m <Media Label> | -b <Barcode> -d <Device Name>
[-s <Server Name>] [-c <Client Name>] [-wait]
Options
 
Table 9. asf_load_media
Option
Description

-m

Specifies the label of the target media item.

-b

Specifies the barcode of the target media item

-d

Specifies the name of the target drive.

-s

Specifies the name of the NetVault machine to which the target device is locally attached. If the device is locally attached to a client (SmartClient), use this option to specify the client name.

-c

Specifies the name of the NetVault Client to which the target device is locally attached.

-wait

Waits until the task has completed.

asf_release_drive

Description

Releases lock placed by the “asf_load_media” command and allows NetVault to use the drive and the media.

Syntax
asf_release_drive -d <Device Name> [-s <Server Name>] [-c <Client Name>]
Options
 
Table 10. asf_release_drive
Option
Description

-d

Specifies the name of the target drive.

-s

Specifies the name of the NetVault Server.

Use this option if the device is locally attached to the server.

-c

Specifies the name of the NetVault Client.

Use this option if the device is attached to a client or remote NetVault Server.

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択