サポートと今すぐチャット
サポートとのチャット

KACE Desktop Authority 11.3 - Administrator Guide

Administrator's Guide
Product Improvement Program Installation Help Concepts User Interface Validation Logic Configuration Computer Management User Management Reference File Paths
Setup Tool

File Replication Locations

Replication files and their targets

Note: Please refer to the File Paths appendix for the correct path(s) based on the version of Desktop Authority you are using.

Desktop Authority uses replication as a method of publishing Desktop Authority configurations to selected targets, which are usually Domain Controllers.

A log file is created during the replication process and lists each file that is published and to which folder. The log file is named SlRepl.txt.

This file can be located on the Operations Master in either (32-bit OS) - %Program Files%\Quest\Desktop Authority\Desktop Authority Manager or (64-bit OS) - %Program Files (x86)%\Quest\Desktop Authority\Desktop Authority Manager.

User Management

User Management files are published from the %Program Files%\Quest\Desktop Authority\Desktop Authority Manager\Scripts or %Program Files (x86)%\Quest\Desktop Authority\Desktop Authority Manager\Scripts, which is shared as SLscripts$.

User Management files are replicated to the User Management replication folder specified in Server Manager. This folder, by default, is \\server_name\NETLOGON (%windir%\SYSVOL\sysvol\[Domain Name]\scripts folder is shared as NETLOGON), but can be changed if necessary.

  • DAClientInstall.msi
  • DaLocMap.ini
  • DASiteMap.ini
  • daUpdateClient.exe
  • DAUSLoc.dll
  • DAUSLocCOM.dll
  • {GUID}.sld
  • {GUID}.slp
  • dotnetfx.exe
  • Interop.SLAgent.dll
  • msvcp71.dll
  • msvcr71.dll
  • netfx64.exe
  • NetOrder.exe
  • profiles.sl
  • psapi.dll
  • ScriptLogic.MapiServer.exe
  • ScriptLogic.MapiServer64.exe
  • shfolder.dll
  • slAgent.dll
  • slAgent.exe
  • slAPIEng90.dll
  • slBoost.exe
  • SLBoost.ini
  • slDataCollection.dll
  • slEngine.dll
  • slInstall.exe
  • SLogic.bat
  • SLPdefault.SL
  • SLPDefault.sld
  • slSigs.ini
  • slStart.exe
  • SLStart.ini
  • sqlite3.dll
  • USBPort Security.exe
  • usbps_x64.exe
  • VarDefs.sl
  • vcredist_x86.exe
  • wKiX32.exe
  • xdel.exe
Computer Management

Computer Management files are published from (32-bit OS) - %Program Files%\Quest\Desktop Authority\Desktop Authority Manager\Device Policy Master or (64-bit OS) - %Program Files (x86)%\Quest\Desktop Authority\Desktop Authority Manager\Device Policy Master.

This folder is shared as DADevicePolicyMaster$.

Computer Management files are replicated to the Computer Management replication folder specified in Server Manager. This folder, by default, is SYSVOL\[DomainName]\Policies\Desktop Authority\Device Policy Master, but can be changed if necessary.

  • CBMConfig.xml.gzip
  • ComputerConfiguration.ini
  • DAClientInstall.msi
  • dalocmap.ini
  • dasitemap.ini
  • daUpdateClient.exe
  • DAUSLoc.dll
  • DAUSLocCOM.dll
  • dotnetfx.exe
  • msvcp71.dll
  • msvcr71.dll
  • NetFx64.exe
  • SLLicense.ini
  • slsigs.ini
  • slstart.ini

Desktop Authority API

The Desktop Authority API is a documented set of functions, variables and supplemental utility programs that allow you to fully harness the capabilities of Desktop Authority through custom scripting.

The Desktop Authority API can be broken down into four categories:

Functions: Wrap many lines of KiXtart code (and supplemental utilities) into a single line of code, for easy insertion into your custom scripts. Many of the Desktop Authority API functions are direct replacements for native KiXtart functions -- and they can overcome the security restrictions of the user logging on.

Dynamic Variables: Globally defined variables in the Desktop Authority engine. These variables are used by the engine itself and can be used in custom scripting.

Utility Programs have been developed to expand upon the built-in functionality of KiXtart. These tools are often wrapped by API Functions eliminating the need to execute them directly.

Dynamic Variables

Desktop Authority API - Dynamic Variables

Predefined Dynamic Variables can be used to aid in the creation of configuration elements. These variables are globally defined and used by Desktop Authority during the client logon process. Using them is helpful, if not a necessity, when writing custom scripts.

Dynamic Variables can be used in virtually every field within the Desktop Authority manager, including those fields with built-in lists. Simply press the F2 key to display a dialog that allows the selection of a predefined variable from a visual list. The dynamic variable will be inserted at the current position of the cursor.

These variables are available for a few different categories:

Applications Variables
Date and Time Variables
Folder and Disk Variables
Messaging System Variables
Network Variables
Operating System Variables
Security Variables
System Variables

$ConnType

Connection Type:

LAN - LAN or WAN connection

RAS - dial-up networking connection

$Date

Current date (e.g. "2000/04/01")

$Description

Description (from UMD)

$DllDir

Location of OS DLL's (e.g. Windows - "C:\Windows\System") (e.g. Win NT - "D:\WinNT\System32")

$Domain

Domain (or Workgroup) that computer belongs to.

$ExitFlag

If set to 1 in a custom script, Desktop Authority will immediately exit after pre or post-engine custom scripts complete.

$FreeSpace

Available disk space on $SystemDrive (in bytes)

$FreeSpaceMb

Available disk space on $SystemDrive (in Megabytes)

$GreetingTime

"morning", "afternoon" or "evening", based on time of day 00:00-11:59, 12:00-17:59, 18:00-23:59, respectively.

$HomeBase

Base sharename part of $HomePath. (e.g. "Users")

$HomeDir

'Long' name of the directory part of the home directory. (e.g. "bjohnson")

$HomePath

Complete home path, including the server, base share and home directory. (e.g. "\\Server1\Users\JohnSmith")

$HomeServer

Server-only part of $HomePath, without leading backslashes. (e.g. "MyServer")

$HomeShare

Server & base share parts of $HomePath. (e.g. "\\Server\Users")

$HostName

TCP/IP host name of the client.

$IeVersion

Internet Explorer Version

$IPAddr

IP address ( First address detected )

$IPOct1

The first octet of $IPAddr

$IPOct2

The second octet of $IPAddr

$IPOct3

The third octet of $IPAddr

$IPOct4

The fourth octet of $IPAddr

$LogonServer

Authenticating Domain Controller - without leading backslashes. (Example: "server1')

$Lserver

Authenticating Domain Controller - with leading backslashes. (Example: "\\server1")

$MACaddr

Network MAC address (adapter 0)

$MapiDefProfile

Name of the default Windows Messaging System profile for the user logging on.

$NetLogon

location of Desktop Authority scripts on authenticating server in UNC form.

Example 1 - "\\server1\netlogon"

Example 2 - "\\server2\netlogon\site1"

$NtOsVerVal

Numeric value of the OS version, expressed as an integer (e.g. 40 or 50)

$NtType

a PDC, BDC or Member Server will return "Server"

an NT Workstation or Windows 2000 Professional will return "Workstation"

$OsBuildNumber

Operating System build number (e.g. 1381)

$OsCsdVersion

Operating System current service pack (e.g. Service Pack 4.0)

$OsType

Operating System type:

95 - Windows 95

98 - Windows 98

NT - All versions of NT/2000

$OsVersion

Operating System version (e.g. " NT Workstation 4.0")

$Priv

Privilege level of user on the domain: "User" or "Admin"

$ProgramFilesDir

Loc. of Program Files on the client (e.g. " C:\Program Files")

$PwDaysLeft

Number of days before password expiration.

$RestartFlag

If set to 1, user will be forced to logoff. A 2 will force the client to reboot.

$ShellAppData

Location of client's Application Data shell folder.

$ShellCache

Location of client's Temporary Internet Files shell folder.

$ShellCookies

Location of client's Cookies folder.

$ShellDesk

Location of client's Desktop shell folder

$ShellDeskCommon

Location of NT client's Common (All Users) Desktop shell folder.

$ShellFavorites

Location of client's Favorites shell folder (IE bookmarks).

$ShellFonts

Location of client's Fonts shell folder.

$ShellHistory

Location of client's History shell folder.

$ShellLocAppData

Location of client's Local Application Data shell folder.

$ShellMyPictures

Location of client's My Pictures shell folder.

$ShellNetHood

Location of client's Network Neighborhood shell folder.

$ShellPersonal

Location of client's Personal shell folder.

$ShellPrintHood

Location of client's Printer Neighborhood shell folder.

$ShellProg

Location of client's Start-Menu Programs shell folder.

$ShellProgCommon

Location of NT client's Common (All Users) Start-Menu Programs shell folder.

$ShellQLaunch
$ShellRecent

Location of client's Recent Documents shell folder.

$ShellSendTo

Location of client's Send To shell folder.

$ShellSMCommon

Location of NT client's Common (All Users) Start-Menu shell folder.

$ShellStartMenu

Location of client's Start-Menu shell folder

$ShellStartup

Location of client's Startup shell folder.

$ShellTemplates

Location of client's Templates shell folder.

$SiCpuSpeed

System Info: CPU #1 MHz (approx.)

$SiCpuType

System Info: CPU #1 Type

$SiCpuVendID

System Info: CPU #1 Vendor ID

$SID

Security Identifier (SID) of current user.

$SiDesktopSize

System Info: Size of desktop (Width x Height)

$SiHDiskSizeGb

System Info: Size of Hard Drive #1

$SiRamMb

System Info: Physical memory, in Mb

$SiSysBiosDate

System Info: System BIOS Date

$SiSysBiosName

System Info: System BIOS Mfg.

$SiVidBiosDate

System Info: Video BIOS Date

$SystemDrive

Drive where OS loaded from (e.g. "C:")

$TermServClient

0 = Non-Terminal Server Client

1 = Terminal Server Client

$Time

Current time (e.g. "14:10")

$TimeHour

Current 2-digit hour (e.g. "14")

$TimeMin

Current 2-digit minutes (e.g. "10")

$TSClient

0 = Non-Terminal Server Client

1 = Terminal Server Client

$UserID

Logon ID of the user.

$VerboseOs

Operating System version.build (e.g. " NT Workstation 4.0.1381")

$W9xPrfEnabled

For Windows 95 & 98 clients:

0 = User Profiles are not enabled.

1 = User Profiles are enabled.

Functions

Desktop Authority API - Functions

The Desktop Authority API functions are designed to streamline your custom scripts by reducing the amount of code you must write. They will also allow you to overcome security limitations of the user.

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択