サポートと今すぐチャット
サポートとのチャット

Foglight for Citrix XenDesktop and XenApp 5.8.2 - Release Notes

System requirements

System requirements

Before installing Foglight for Citrix XenDesktop and XenApp, ensure your system meets the following minimum hardware and software requirements.

 

Operating System

Foglight for Citrix XenDesktop and XenApp can be installed on any supported configuration listed in Upgrade and compatibility.

Platform, Memory and Hard Disk Space The platform, memory, and hard disk space requirements for the monitored servers must match the Agent Manager requirements. For complete information, see the System Requirements and Platform Support Guide.

 


Product licensing

Product licensing

Foglight includes a licensing capability that restricts access to those features that are defined in the license. Any Management Server installation requires a license that grants access to server-specific parts of the browser interface and the features associated with them. Foglight cartridges are also license-protected. While some cartridges are covered by the base Foglight license (such as Foglight Agent Manager cartridges and Foglight for Infrastructure), others may require an additional license. Foglight for Citrix XenDesktop and XenApp is covered by the Foglight Evolve Monitor, Operate, and Flex license.

To activate a trial or a purchased commercial license:

  1. On the navigation panel, under Dashboards, click Administration > Setup > Manage Licenses.
  2. Click Install.
  3. In the Install License dialog box, click Browse.
  4. In the file browser that appears, specify the location of the license file.
  5. In the Install License dialog box, click Install License.

 


Getting started with Foglight for Citrix XenDesktop and XenApp

Getting started with Foglight for Citrix XenDesktop and XenApp

Contents of the release package

The Foglight for Citrix XenDesktop and XenApp release package contains the following:

  1. Cartridge file:
    • XenDesktop-5_8_2.car
  2. Product Documentation, including:
    • Foglight for Citrix XenDesktop and XenApp Release Notes (this document, in HTML format)
    • Foglight for Citrix XenDesktop and XenApp User Guide (PDF and online help)

Installation instructions

Foglight Evolve 9.2 or Foglight for Virtualization, Enterprise Edition 8.9.2 includes Foglight for Citrix XenDesktop and XenApp 5.8.2. Once you installed Foglight Evolve 9.2 or Foglight for Virtualization, Enterprise Edition 8.9.2, Foglight for Citrix XenDesktop and XenApp is also installed on the Foglight Management Server. You just need to go the XenDesktop Environment dashboard to activate the trial license or install a commercial license.

Note: Citrix XenDesktop requires Foglight for VMware 5.8.2 to be installed on the same Management Server.

 

To install the cartridge file, activate a license, and deploy monitoring agents:

  1. Download the following packages from Quest Support Portal:
    • Foglight for VMware version 5.8.2 (which includes the vUsage-Feedback-5_8_2.car, DRP-5_8_2.car, Virtual-VMware-5_8_2.car, and Virtual-VMware-Admin-5_8_2.car cartridge files)
    • Foglight for Citrix XenDesktop and XenApp version 5.8.2 (which includes the XenDesktop-5_8_2.car cartridge file)
  2. On the Cartridge Inventory dashboard, install and enable the following cartridge files. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-5_8_2.car
    2. DRP-5_8_2.car
    3. Virtual-VMware-5_8_2.car
      Note: After installing the Virtual-VMware-5_8_2.car cartridge, existing vCenter agents (VC agents) must be updated using the Update Agent button in the VMware Environment > Administration tab.
    4. Virtual-VMware-Admin-5_8_2.car
    5. XenDesktop-5_8_2.car

    For cartridge installation instructions, see "Installing Foglight cartridges" in the Foglight Administration and Configuration Help.

  3.  Navigate to the XenDesktop Environment dashboard, and activate the trial license, or install a commercial license, as required. For instructions, see Product Licensing.
  4. On the XenDesktop Environment dashboard, on the Administration tab, run the XenDesktop and NetScaler discovery wizards to deploy XenDesktop and NetScaler agents and to start collecting data. For more information, see the Foglight for Citrix XenDesktop and XenApp User Guide.

After installing the cartridge files, the following cartridge appears on the Cartridge Inventory dashboard:

  • XenDesktop 5.8.2
  • XenDesktop-Agent 5.8.2
  • NetScaler-Agent 5.8.2

Configuration prerequisites

Configuring Process & Session Timeout

To change the Session Timeout:

  • On the agent machine, open the baseline.jvmargs.config file for editing. The file is located in the <Agent_Manager_home>/state/default/config directory.
  • Comment out the # vmparameter.0 = ""; at the bottom of this file.
  • Add the Timeout period in millisecond. For example, set the Timout period to 30 seconds. Then you should add the following line:
    vmparameter.0 = "-Dcom.quest.xendesktop.process.collector.ProcessDataCollectorWorker=30000";

To change the Process Timeout:

  • On the agent machine, open the baseline.jvmargs.config file for editing. The file is located in the <Agent_Manager_home>/state/default/config directory.
  • Comment out the # vmparameter.0 = ""; at the bottom of this file.
  • Add the Timeout period in millisecond. For example, set the Timout period to 30 seconds. Then you should add the following line:
    vmparameter.0 = "--Dcom.quest.xendesktop.session.collector.SessionDataCollector=30000";

Configuring NetScaler https

To configure this, you need to specify the port and protocol in the FglAM configuration file:

vmparameter.0 = "-Dcom.dell.netscaler.10.30.180.70.protocol=https";

vmparameter.1 = "-Dcom.dell.netscaler.10.30.180.70.protocol.port=443";

Configuring your XenDesktop system for monitoring

To discover your XenDesktop environment for configuration, you must enable a remote connection to at least one of the XenDesktop Delivery Controllers in your XenDesktop site. Follow the instructions in Configuring a remote connection on a XenDesktop Delivery Controller to enable the remote connection for a XenDesktop Delivery Controller in each XenDesktop site.

To monitor the License Server, StoreFront Server, Database Server, Domain Controller Server, and Delivery Controllers that the XenDesktop Discovery Wizard detects in a XenDesktop environment, you must enable remote connections to the machines running these components. See Configuring remote connections on a License Server, StoreFront Server, Database Server, Domain Controller Server, and Multiple Delivery Controllers for instructions.

Monitoring process-level information for each virtual application requires that a remote connection to each virtual machine is enabled. To simplify the configuration process, it is recommended that you enable a remote connection on the XenDesktop virtual machine’s master image. For complete instructions on how to enable a remote connection on a master image and to update it, see Configuring XenDesktop Master Images for monitoring virtual applications.

XenDesktop agents rely on the Foglight Agent Manager services to collect data from the monitored system. These remote connections use Kerberos authentication. It is recommended that you verify the Kerberos configuration before creating XenDesktop agent instances. For more information, see Configuring the Agent Manager Kerberos settings.

Obtaining WinRM (or DCOM) scripts

Foglight for Citrix XenDesktop and XenApp comes with scripts that allow you to automatically configure your WinRM or DCOM connection:

  • WinRMConfig.zip: Use the script provided in this file to configure WinRM settings on a single host.
  • DComConfig.zip: Use the script provided in this file to configure DCom settings on a single host.
  • WinRMGPOConfig.zip: Use the script to quickly configure WinRM settings on multiple hosts within the same domain.

While both WinRM and DCOM connections are supported, WinRM is recommended. The scripts are available for download from the Foglight browser interface. Running a WinRM or DCOM script on the XenDesktop Delivery Controller allows you to automatically configure remote connections.

To configure a remote connection using a WinRM or DCOM script:
  1. Log in to the Foglight browser interface.
  2. On the navigation panel, under Dashboards, choose Administration > Cartridges > Components for Download.
  3. On the Cartridge Inventory dashboard, locate the row containing WinRM PowerShell automation script or DCom PowerShell automation script, as required, and click to download it.
    For more information about the Cartridge Inventory dashboard, see the Administration and Configuration Help.
    Tip: The WinRM and DCOM scripts are also available for download from the XenDesktop Discovery Wizard. For more information about this wizard, see the Foglight for Citrix XenDesktop and XenApp User Guide.

Configuring a remote connection on a XenDesktop Delivery Controller

After obtaining a WinRM or DCOM script, use it to configure a remote connection on your XenDesktop Delivery Controller.

To configure a remote connection on a XenDesktop Delivery Controller:
  1. Log in to the XenDesktop Delivery Controller machine.
  2. Copy the ZIP file containing the WinRM script to the XenDesktop Delivery Controller machine, and extract its contents, consisting of a readme file and a PowerShell script.
  3. Review the instructions in the readme. Run the PowerShell script locally on the XenDesktop Delivery Controller machine.

Configuring remote connections on a License Server, StoreFront Server, Database Server, Domain Controller Server, and Multiple Delivery Controllers

After obtaining a WinRM or DCOM script, use it to configure a remote connection on your Citrix components, including the License Server, StoreFront Server, Database Server, Domain Controller Server, and multiple Delivery Controllers.

To configure remote connection on a License Server, StoreFront Server, Database Server, Domain Controller Server, and Delivery Controllers:
  1. For each License Server, StoreFront Server, Database Server, Domain Controller Server, and Delivery Controller that you want to configure, log in to its machine.
  2. Copy the ZIP file containing the WinRM script to each machine, and extract its contents, consisting of a readme file and a PowerShell script.
  3. Review the instructions in the readme. Run the PowerShell script locally on each machine.

Configuring XenDesktop Master Images for monitoring virtual applications

To collect the performance metrics from a virtual application, Foglight for Citrix XenDesktop and XenApp must connect to the virtual machines providing virtual application instances using a WinRM or DCOM connection in order to collect the virtual application process data.

Note: The configuration described in this step is optional. It is only required if you want to collect the virtual application process data.

To simplify this workflow, it is recommended to enable WinRM or DCOM connectivity on the XenDesktop machine’s master image. A master image is a template that you use to deploy your environment. Creating a master image involves installing and configuring the operating system and any software you want to include on your image.

Start by obtaining the WinRM or DCOM script. The scripts can be downloaded from the Components for Download dashboard. For more information, see Obtaining WinRM (or DCOM) Scripts.

Next, prepare a XenDesktop master image. This procedure must be applied to all master images that are the templates of those machines that you want to monitor (for virtual applications, more specifically).

Finally, update all master images that are the templates of the virtual machines that you want to monitor.

To prepare a new XenDesktop master image for configuration:
  1. Find the virtual machine and snapshot for current master image.
  2. Optional. If you do not need to keep the changes after the last master image, revert the virtual machine to the master image snapshot.
  3. Start the virtual machine using a Remote Desktop Connection or the virtualization platform console, and follow instructions in the WinRM or DCOM script to enable a remote connection.
    Tip: The WinRM and DCOM scripts are available for download from the Components for Download dashboard. For more information, see Obtaining WinRM (or DCOM) scripts.
  4. Create a new snapshot as the new template of the master image.
To update a XenDesktop master image:
  1. Open the XenDesktop Studio.
  2. In the XenDesktop studio, in the left pane, click the Machine Catalogs node. In the right pane, select a machine catalog, and click Update Machine.
  3. On the Master Image page, select the newly prepared master image (a virtual machine snapshot), and click Next.
  4. On the Rollout Strategy page, specify how the new or updated master image is applied to the users' desktops, and click Next.
  5. On the Summary page, click Finish.

System permissions

After a successful configuration of your XenDesktop system for monitoring, ensure that the following account privileges are granted to the Delivery Controller, NetScaler, and VMware accounts that the monitoring agents will use to connect to these systems.

Account Type

Required Account Privileges

Delivery Controller login domain account

Read-only access for running:

  • XenDesktop PowerShell cmdlets through WinRM/DCOM
  • OData queries

Note: The XenDesktop management account includes the above privileges.

NetScaler Management Account

System advanced features (enable/disable AppFlow): Read, Modify

AppFlow collectors/Policies/Actions: Read, Modify, Delete

NetScaler Gateway:

  • Policies > AppFlow: Read, Modify, Delete
  • Virtual Server > Policies > AppFlow: Read, Modify

Note: The NetScaler default Administrator account the above privileges.

VMware vCenter Account

  • Datastore > Browse datastore
  • Datastore > Remove file
  • Sessions > View and stop sessions
  • Virtual machine > Configuration > Change CPU count
  • Virtual machine > Configuration > Change resource
  • Virtual machine > Configuration > Memory
  • Virtual machine > Interaction > Power Off
  • Virtual machine > Interaction > Power On
  • Virtual machine > State > Remove Snapshot

Note: The vCenter default Administrator account includes the above privileges.

Performing network connectivity checks

To successfully you start monitoring your environment with Foglight for Citrix XenDesktop and XenApp, ensure that there are no connectivity issues between the following connection points in your environment:

  • Foglight Agent Manager and NetScaler®
  • Foglight Agent Manager and XenDesktop Controller

Foglight for Citrix XenDesktop and XenApp uses the following ports. Make sure they are not blocked by your firewall.

Client

Server

Default Port

Foglight Agent Manager

Controller

WinRM: 5985
OData: 80

Foglight Agent Manager

NetScaler Server

NetScaler SDK: 80

NetScaler Server

Foglight Agent Manager

AppFlow: customized port (UDP)

Foglight Agent Manager

License Server

StoreFront Server

Database Server

Domain Controller Server

Machine delivering virtual applications

WinRM: 5985

Foglight Agent Manager

vCenter® Server

VMware® SDK: 443

 

If you are using the Foglight Evolve vApp, update the Foglight Management Server SuSE firewall UDP port setting before creating a NetScaler Agent instance.

To update the SuSE firewall UDP port:
  1. In the vCenter, open the Foglight Management Server VM console vApp.
  2. Open the SuSE firewall configuration file for editing by typing the following at the command prompt:
    vi /etc/sysconfig/SuSEfirewall2
  3. In the SuSEfirewall2 file, locate the FW_SERVICES_EXT_UDP parameter and set it to the NetFlow listener port (9995 by default, this should be the same port number as the one you specify in the NetScaler Agent wizard) by typing the following:
    FW_SERVICES_EXT_UDP =”9995”
  4. Save your changes to the SuSEfirewall2 file by pressing ESC and typing the following:
    wq!
  5. Restart the SuSEfirewall service by typing the following:
    rcSuSEfirewall2 restart

From here, you can create a NetScaler Agent instance.

Configuring the Agent Manager Kerberos settings

Foglight for Citrix XenDesktop and XenApp agents use Foglight Agent Manager services to run cmdlets and queries on monitored hosts to collect data. This interface relies on Kerberos authentication. In most cases, the Agent Manager automatically generates required Kerberos configuration files. To ensure these services work as expected, after installing Foglight for Citrix XenDesktop and XenApp on the Management Server, and before running the Discover XenDesktop Infrastructure wizard, verify the Kerberos configuration on the Agent Manager. If you update any settings, restart the Agent Manager in order for these changes to take effect.

To check a Kerberos configuration file:
  1. Open one of these files for editing:

    • <fgl_home>\fglam\state\default\config\fglam.config.xml (embedded Agent Managers)

    • <fglam_home>\state\default\config\fglam.config.xml (stand-alone Agent Managers)

  2. In the fglam.config.xml file, locate the <config:krb5-config-file> element. It should point to the OS krb5.config file, or the Agent Manager's own krb5.config file, if the OS does not include one.

  3. Locate and open the krb5.config file for editing. You can find this file in your Agent Manager installation directory: <fglam_home>/state/default/config.

  4. In the krb5.config file, ensure that the target host’s domain (the XenDesktop Delivery Controller’s domain) is specified as the default realm. For example, if the domain is example.com, look for the following lines in the file.

    Tip
    : The KDC (Key Distribution Center) IP address (or hostname) is usually same as the Active Directory IP address (or host name).

    [libdefaults]
        default_realm = EXAMPLE.COM

    [realms]
        EXAMPLE.COM = {
        kdc = 192.0.2.0
        }

    [domain_realm]
        .example.com = EXAMPLE.COM

  5. If you make any changes to the krb5.config file, restart the Agent Manager.

    1. Log in to the Foglight browser interface.

    2. On the navigation panel, under Dashboards, choose Administration > Agents > Agent Managers.

    3. Select the row containing the Agent Manger host, and click Restart.

    For more information about this dashboard, see the Administration and Configuration Help. For more information about the Agent Manager, see the Agent Manager Guide.

Sizing recommendations

This section presents the sizing formula used to calculate the memory needed for Foglight Agent Manager and Foglight Management Server to run stable.

Sizing formula and examples for Foglight Agent Manager

VMWare® = 512 MB + 0.50 MB * Desktop(VM)#

XenDesktop® and XenApp® = 256 MB +0.25 MB * Session#

Session/Process Collection = 0.5 MB * Desktop(VM)#  

Note: The VMware agent requires a minimum of 2.5 GB of memory.

 

Example: The first line in the following table shows a XenDesktop environment with 200 desktops.

The VMware agent was set up to collect full metrics, and consumes 512 MB + 0.5 MB * 200 = 612 MB for running stable.

XenDesktop consumes 256 MB + 0.25 MB * 200 = 306 MB for running stable. 

The total cost is 612 MB + 306 MB = 918 MB of total memory.

When the Session/Process Collection is enabled, addition memory is consumed for the same environment: 200 * 0.5 = 100 MB. The total cost in this case is 918 + 100 = 1018 MB.

After the total memory (MB) is determined, you have the following two options:

  1. If "Total Memory" is less than or equal to 2560 MB, no changes are required in the Agent Manager, as the default memory of the VMware agent manifest should suffice.
  2. If "Total Memory" is greater than 2560 MB, you must change the default Agent Manager settings. The amount of additional memory required is the total memory (see "Total Memory" column in the table below) minus the default value of 2560 MB.
    In example 5, the additional memory required is: 4518 – 2560 = 1958 MB.
    1. On the agent machine, open the baseline.jvmargs.config file for editing. The file is located in the <Agent_Manager_home>/state/default/config directory.
    2. Add the following lines in the Memory Settings section:
      vmparameter.0 = "-Xms1958m";
      vmparameter.1 = "-Xmx1958m";
      Note: If this file has been previously edited, increment the numeric parameters accordingly.
    3.  Delete the existing deployed negotiation configuration settings directory: <Agent_Manager_home>/state/default/config/deployments.
    4. Restart the Agent Manager for these settings to take effect.

Example #

Desktop Count

VMware

Session/Process Collection

XenDesktop and XenApp Sessions

Total Memory (MB)

Example 1

200

612

0

306

918

Example 2

500

762

0

381

1143

Example 3

1000

1012

0

506

1518

Example 4

2000

1512

0

756

2268

Example 5

5000

3012

0

1506

4518

Example 6

10000

5512

0

2756

8268

With Virtual Application enabled Session/Process collection

Example 1

200

612

100

306

1018

Example 2

500

762

250

381

1393

Example 3

1000

1012

500

506

2018

Example 4

2000

1512

1000

756

3268

Example 5

5000

3012

2500

1506

7018

Example 6

10000

5512

5000

2756

13268

 

 Foglight Management Server minimum memory requirements

Desktop Count Memory
 < 1000

8G

2500 17G
5000 25G
10000 40G

Additional resources

Additional information is available from the following:

Globalization

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.

 


About Us

About Us

We are more than just a name

We are on a quest to make your information technology work harder for you. That is why we build community-driven software solutions that help you spend less time on IT administration and more time on business innovation. We help you modernize your data center, get you to the cloud quicker and provide the expertise, security and accessibility you need to grow your data-driven business. Combined with Quest’s invitation to the global community to be a part of its innovation, and our firm commitment to ensuring customer satisfaction, we continue to deliver solutions that have a real impact on our customers today and leave a legacy we are proud of. We are challenging the status quo by transforming into a new software company. And as your partner, we work tirelessly to make sure your information technology is designed for you and by you. This is our mission, and we are in this together. Welcome to a new Quest. You are invited to Join the Innovation™.

Our brand, our vision. Together.

Our logo reflects our story: innovation, community and support. An important part of this story begins with the letter Q. It is a perfect circle, representing our commitment to technological precision and strength. The space in the Q itself symbolizes our need to add the missing piece — you — to the community, to the new Quest.

Contacting Quest

For sales or other inquiries, visit www.quest.com/contact.

Technical support resources

Technical support is available to Quest customers with a valid maintenance contract and customers who have trial versions. You can access the Quest Support Portal at https://support.quest.com.

The Support Portal provides self-help tools you can use to solve problems quickly and independently, 24 hours a day, 365 days a year. The Support Portal enables you to:

  • Submit and manage a Service Request.
  • View Knowledge Base articles.
  • Sign up for product notifications.
  • Download software and technical documentation.
  • View how-to-videos.
  • Engage in community discussions.
  • Chat with support engineers online.
  • View services to assist you with your product.

 


Copyright© 2020 Quest Software Inc.

Quest, the Quest logo, Foglight, and Join the Innovation are trademarks and registered trademarks of Quest Software Inc. in the U.S.A. and other countries. For a complete list of Quest Software trademarks, please visit our website at www.quest.com/legal. Red Hat, JBoss, the JBoss logo, and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the U.S. and other countries. CentOS is a trademark of Red Hat, Inc. in the U.S. and other countries. Fedora and the Infinity design logo are trademarks of Red Hat, Inc. Microsoft, .NET, Active Directory, Internet Explorer, Hyper-V, Office 365, SharePoint, Silverlight,SQL Server, Visual Basic, Windows, Windows Vista and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. AIX, IBM, PowerPC, PowerVM, and WebSphere are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide. Java, Oracle, Oracle Solaris, PeopleSoft, Siebel, Sun, WebLogic, and ZFS are trademarks or registered trademarks of Oracle and/or its affiliates in the United States and other countries. SPARC is a registered trademark of SPARC International, Inc. in the United States and other countries. Products bearing the SPARC trademarks are based on an architecture developed by Oracle Corporation. OpenLDAP is a registered trademark of the OpenLDAP Foundation. HP is a registered trademark that belongs to HewlettPackard Development Company, L.P. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. MySQL is a registered trademark of MySQL AB in the United States, the European Union and other countries. Novell and eDirectory are registered trademarks of Novell, Inc., in the United States and other countries. VMware, ESX, ESXi, vSphere, vCenter, vMotion, and vCloud Director are registered trademarks or trademarks of VMware, Inc. in the United States and/or other jurisdictions. Sybase is a registered trademark of Sybase, Inc. The X Window System and UNIX are registered trademarks of The Open Group. Mozilla and Firefox are registered trademarks of the Mozilla Foundation. IOS is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. Apple, iPad, iPhone, Mac OS, Safari, Swift, and Xcode are trademarks of Apple Inc., registered in the U.S. and other countries. Ubuntu is a registered trademark of Canonical Ltd. Symantec and Veritas are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. OpenSUSE, SUSE, and YAST are registered trademarks of SUSE LCC in the United States and other countries. Citrix, AppFlow, NetScaler, XenApp, and XenDesktop are trademarks of Citrix Systems, Inc. and/or one or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries. PostgreSQL is a registered trademark of the PostgreSQL Global Development Group. MariaDB is a trademark or registered trademark of MariaDB Corporation Ab in the European Union and United States of America and/or other countries. Intel, Itanium, Pentium, and Xeon are trademarks of Intel Corporation in the U.S. and/or other countries. Debian is a registered trademark of Software in the Public Interest, Inc. OpenStack is a trademark of the OpenStack Foundation. Amazon Web Services, the "Powered by Amazon Web Services" logo, and "Amazon RDS" are trademarks of Amazon.com, Inc. or its affiliates in the United States and/or other countries. Infobright, Infobright Community Edition and Infobright Enterprise Edition are trademarks of Infobright Inc. POLYCOM®, RealPresence® Collaboration Server, and RMX® are registered trademarks of Polycom, Inc. All other marks and names mentioned herein may be trademarks of their respective companies.

 

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択