NetVault 12.1 - Administration Guide

Adding a client to the NetVault Backup Server

To use a client in a backup or restore operation, you must first add the client to the NetVault Backup Server. You can use the configuration wizard to add and configure a NetVault Backup Client.


	NOTE: A NetVault Backup Server can only support clients of the same version as itself or older. The NetVault Backup Client software version cannot be higher than the NetVault Backup Server software version.

To add a client to the NetVault Backup Server:

In the Navigation pane, click Manage Clients, and then click Add Client.

On Linux-based machines, you can also start the wizard from the Guided Configuration link. In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, click Add Clients.

In the list of available clients, select the client that you want to add, and click Next.

The list includes machines that are automatically discovered on the network broadcast range. These are machines on which you have installed the NetVault Backup Server or Client software.

You can view the following information about the machines:

•

Status: Displays the status icons, which indicate whether the client is online of offline.

•

Client: Displays the NetVault Backup name assigned to the client.

•

Version: Displays the NetVault Backup version installed on the machine.

•

Description: Displays the client description.

The following table provides a brief description of the client status icons.

Table 16. Client status icons
Icon	Description
	The client is online. You can add the client to the NetVault Backup Server.
	The client is online, but it is password-protected. To add the client, you require its NetVault Backup password.
	The client is offline. Try adding the client later when it is online.


	NOTE: The clients that reside in a different subnet are not listed on this page. You can use the Find Machine option to locate and add such clients. For more information, see Locating a client.

NetVault Backup web application supports multiple-column sorting for the tables. For more information, see Sorting records in NetVault Backup WebUI.

To view the page size setting, sorting order in the table, export the records, or edit table settings, click the icons at the lower-right corner of the table. For more information, see Customizing tables in NetVault Backup WebUI.

If the client is password-protected, type the NetVault Backup password for the client. You can also provide the root or administrator password for the client.

If a NetVault Backup password is not set for the client, provide the root or administrator password for the client.

Click Next.

This page is not displayed if security is disabled on the client. For more information, see Configuring security settings.

Type a descriptive text for the client, and click Next.

If the client resides on a network that is outside the firewall, select the Client is Outside Firewall check box, and configure the firewall settings. For more information, see Firewall settings.

Click Next.

After the client is successfully added to the server, a message is displayed.

Adding multiple clients (Windows only)

When adding clients to a Windows-based NetVault Backup Server, you can use the following procedure to add multiple clients at the same time.


	NOTE: A NetVault Backup Server can only support clients of the same version as itself or older. The NetVault Backup Client software version cannot be higher than the NetVault Backup Server software version.

To add multiple clients to a Windows-based NetVault Backup Server:

In the Navigation pane, click Guided Configuration, and then on the NetVault Configuration Wizard page, select the Install Software/Add Clients option.

Select Add remote machines, which already have NetVault installed, as clients to this server, and click Next.

On the Machines to Be Added as Clients page, click Choose Machines, and select a method for adding the deployment targets.

Method

Description

By FQDN or IP

To manually add the deployment targets, select this method.

On the Machine Details tab, specify the FQDN or IP address of the client.

Click Next.

From Active Directory

To select machines from an Active Directory Domain, select this method.

On the AD Details tab, provide the following details:

•

AD Server Address: Type the host name or IP address of the Active Directory Server.

•

User Name: Specify a Domain Account that is in the local Administrators group of all target machines.

The user name must be specified in the following format:

— or —

•

Password: Specify the password for the user account.

Optionally, if you want NetVault Backup to remember the password for this user name, select Save Password.

NOTE: Saved credentials are visible only to the user who saved them. They are not available to any other users.

Click Connect.

In the list of Active Directory Objects, select the target machines, and click Next.

From a file

To import the target list from a file, select this method.

In the Add machines from file dialog box, click Select a file. After selecting the file in the browse window, click OK to upload the file.

For more information about the file format, see File format for specifying deployment targets.

From available machines

To add a client from available machines, select this method.

On the NetVault Machine Details tab, select the client that you want to add.

If the client is password-protected, provide the NetVault Backup password in the Machine Password box.

If a NetVault Backup password is not set for the client, leave the field blank.

Click Next.

Configure the applicable parameters.

Option

Description

Installation Settings

On the Installation Settings tab, provide the NetVault Backup password.

If no NetVault Backup password is set for the client, specify the administrator password for the machine.

Click Next.

Client Settings

On the Client Settings tab, provide the following details:

•

Client Description: Type a descriptive text for the client.

Client description can help you determine the location of the client or the role of the machine.

•

Client Group: To add the client to one or more client groups, select the corresponding check boxes.

The client groups that are configured to contain all clients are selected by default. You cannot change these selections.

Click Next.

Firewall Settings

If the client resides on a network that is outside the firewall, select the Client is Outside Firewall check box on the Firewall Settings tab, and provide the TCP/IP port specifications. For more information about these settings, see Firewall settings.

To save the client details, click OK.

Before submitting the task, do the following:

•

Click Verify to check connectivity to the clients. If any errors are reported, click Edit, and modify the applicable installation parameters.

•

If you want to assign a user-defined task name, type the name in the Task Name box.

To submit the task, click Install Software/Add Clients.

You can monitor the progress and status of the task from the Deployment Task Status page. For more information, see Monitoring deployment tasks.

Firewall settings

Firewall settings are required to communicate with NetVault Backup Clients that reside outside the firewall. You can use these settings to specify the TCP/IP ports for establishing data transfer channels, message channels, and broadcast channels through the firewall.

You can configure the firewall settings when deploying or adding a client, or update these settings from the Change Settings page. You can also use the NetVault Backup WebUI or Txtconfig utilities to configure the firewall settings for new or existing clients.


	NetVault Backup does not support firewalls using NAT (Network Address Translation)/IP Masquerading.

The following table provides a brief description of the firewall settings.

Table 17. Firewall settings
Option	Description
Listen ports for devices	Ports to listen on for device requests. Configure this option on the NetVault Backup machines that have a locally attached device (for example, NetVault Backup Server or NetVault Backup Clients with SmartClient licenses). Requirement: Two ports per drive.
Connect ports for devices	Ports that plug-ins use to connect to remote storage devices. Configure this option on clients that connect to remote devices. Requirement: Two ports per drive.
Listen ports for NetVault Backup message channels	Ports for receiving messages during data transfers. Configure this option on both the NetVault Backup Server and the Client. NetVault Backup requires a two-way connection between the Server and the Client for message channels. Requirement: Three ports per client. To run two or more plug-ins simultaneously on a client, configure two ports per plug-in and an extra port per client. For example, to run two plug-ins simultaneously, configure (2 * 2) + 1 = 5 ports for a client.
Connect ports for NetVault Backup message channels	Ports for sending messages during data transfers. Configure this option on both the NetVault Backup Server and the Client. NetVault Backup requires a two-way connection between the Server and the Client for message channels. Requirement: Three ports per client. To run two or more plug-ins simultaneously on a client, configure two ports per plug-in and an extra port per client. For example, to run two plug-ins simultaneously, configure (2 * 2) + 1 = 5 ports for a client.
Connect ports for NDMP control channels	Ports for sending NDMP messages (NDMP control channels). Configure this option on the NetVault Backup Server (on which the plug-in is installed) when a firewall separates an NDMP filer and the NetVault Backup Server. By default, NetVault Backup uses port number 10000. You can change it, if necessary.
Listen ports for NDMP data channels	Ports to listen on for NetVault Backup devices operating as NDMP movers. Configure this option on the NetVault Backup Server or Client to which the device is attached. These ports are used for data transfers between the NDMP filer and storage device when a firewall separates the two networks.
Connect ports for inter-machine setup	Ports for establishing initial contact (broadcast channels) while adding a NetVault Backup Client, and later to ascertain its availability. Requirement: Two ports per client.

You can use the following formats to specify the ports or port ranges for data channels, message channels, and broadcast channels:

•

A comma-separated list (example: 20000, 20050)

•

A port-range separated by a dash (example: 20000-20100)

•

A combination of comma-separated list and port-range (example: 20000-20100, 20200)


	NOTE: You must configure the same port-range for data, message, and broadcast channels across all NetVault Backup machines.

IMPORTANT:

•

NetVault Backup does not support firewalls using NAT (Network Address Translation)/IP Masquerading.

•

NetVault Backup uses port number 20031 for TCP and UDP messaging. Make sure that this port is open on the firewall.

For more information, see the following sections:

•

Firewall filtering rules

•

Firewall configuration example

Firewall filtering rules

When creating firewall rules on the server and client machines, make sure that you open the following ports to send and receive traffic from NetVault Backup.

Table 18. Firewall filtering rules
From	To	TCP/UDP	Source port	Destination port
Server	Client	TCP	Connect ports for inter-machine connection setup specified on the NetVault Backup Server	20031
Client	Server	TCP	Connect ports for inter-machine connection setup specified on the NetVault Backup Clients	20031
Server	Client	TCP	Connect ports for message channels specified on NetVault Backup Server	Listen Ports for Message Channels specified on the NetVault Backup Clients
Client	Server	TCP	Listen ports for message channels specified on the NetVault Backup Clients	Connect Ports for Message Channels specified on the NetVault Backup Server
Server	Client	UDP	20031	20031
Client	Server	UDP	20031	20031
Server	Client	TCP	Listen ports for devices specified on the NetVault Backup Server and Clients	Connect ports for devices specified on the NetVault Backup Clients
Client	Server	TCP	Connect ports for devices specified on NetVault Backup Clients	Listen ports for devices specified on NetVault Backup Server and Clients

製品を選択してください:

サービス向上のために、「Purpose of your Chat（チャットの目的）」を記入してください。

お客様の不具合に推奨されるソリューション

NetVault 12.1 - Administration Guide

Adding a client to the NetVault Backup Server

Adding multiple clients (Windows only)

Firewall settings

Firewall filtering rules