Chatta subito con l'assistenza
Chat con il supporto

DR Series Software 4.0.3.1 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --hybrid_replication [--enable][--disable][--status] system --rdairgap [--enable][--disable][--set_retention_period <0 days to 365 days>][--get_retention_period][--open][--close][--status] system --rdairgap_schedule [--start_time <HH:MM>][--end_time <HH:MM>][--remove] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --configuration --enable_sha256_web_certificate maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands About us

Network Command Usage

•
network --show [options]
•
network --delete (Option only available on a Physical DR)
•
network --restart
•
network --setdhcp [options]
•
network --setstatic_ip [options]
•
network --create_bond (Option only available on a Physical DR)
•
network --create_eth (Option only available on a Physical DR)
•
network --add_member (Option only available on a Physical DR)
•
network --setdns [options]
•
network --setbonding [options] (Option only available on a Physical DR)
•
network --update (Option only available on a Physical DR)
•
network --factory_reset (Option only available on a Physical DR)
•
network --host (Option only available on a Physical DR)
•
network --route (Option only available on a Physical DR)
•
network --nslookup [options]
•
network --traceroute [options]
•
network --ping [options]
•
network --blink (Option only available on a Physical DR)
•
network --enable (Option only available on a Physical DR)
•
network --disable (Option only available on a Physical DR)
•
network --troubleshoot [options]
•
network --tcpdump [options]
•
network --iperf_client [options]
•
network --iperf_server [options]
•
network --help
* 
NOTE: If you specify a command without supplying the expected value or option, you are prompted to provide the correct value or option.
* 
NOTE: Most network commands require a network --restart command for the changes to occur.

network --show

Description

Displays the current networking configuration for a DR Series system. (Only a Physical DR has sub-options for network –show.)

Syntax

network --show [--bondif <bond0,bond1,...,bondN>] [--nwif <eth0,eth1,...,ethN>] [--hosts] [--routes] [--interface <bondN|ethN>]

--bondif Bond interface(s) to show.
--nwif Eth interface(s) to show.
--hosts Show local host.
--routes Show local routes.
--interface Routes for a specific interface.

Result

Device : bond0
Enabled : yes
Link : yes
Boot protocol : dhcp
IP Addr : 10.20.24.55
Netmask : 255.255.252.0
Gateway : 10.20.32.13
MAC Addr : 78:2B:CB:47:D0:08
MTU : 1500
Bonding options : "mode=balance-alb miimon=100 xmit_hash_policy=2"
Slave Interfaces : eth0,eth1,eth2,eth3
eth0 MAC : 78:2B:CB:47:D0:08
eth0 Max Speed : 1000baseT/Full
eth0 Speed : 1000Mb/s
eth0 Duplex : Full
eth1 MAC : 00:50:56:93:5A:02
eth1 Max Speed : 1000baseT/Full
eth1 Speed : 1000Mb/s
eth1 Duplex : Full
eth2 MAC : 00:50:56:93:5A:03
eth2 Max Speed : 1000baseT/Full
eth2 Speed : 1000Mb/s
eth2 Duplex : Full
eth3 MAC : 00:50:56:93:5A:04
eth3 Max Speed : 1000baseT/Full
eth3 Speed : 1000Mb/s
eth3 Duplex : Full
DNS Suffix : storage.local
Primary Nameserver : 10.25.19.15
Secondary Nameserver : 10.25.19.16

network --delete

Description

The command deletes a network interface.

Syntax

network --delete [--bondif <bond0,bond1,...,bondN>]
[--member <eth0,eth1,...,ethN>]
[--nwif <eth0,eth1,...,ethN>]

--bondif Bond interface(s) to delete.
--member Bond member interface(s) to delete.
--nwif Eth interface(s) to delete.
For example, to delete network interface eth2, run the command: network --delete --nwif eth2

Result

Interface delete successful. Please restart networking for the changes to take effect.

network --restart

Description

Restarts the current networking configuration for a DR Series system.

Syntax

Result

Shutting down interface eth0: [ OK ]
Shutting down interface eth1: [ OK ]
Shutting down interface eth2: [ OK ]
Shutting down interface eth3: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0:
Determining IP information for bond0... done. [ OK ]
DNS Updated hostname: acme11.storage.local
Related Documents

The document was helpful.

Seleziona valutazione

I easily found the information I needed.

Seleziona valutazione