Chatta subito con l'assistenza
Chat con il supporto

Rapid Recovery 6.8 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Pause

An administrator can pause snapshots, export to virtual machines, or replicate a Core. The pause command accepts three parameters: snapshot, vmexport, and replication. Only one parameter can be specified. A snapshot can be paused until a certain time, if a time parameter is specified.

A user can pause replication in three ways:

  • On a source Core for all protected machines.(-[outgoing]).

    The administrator must specify the remote machine name with the outgoing replication pairing to pause outgoing replication on the source Core:

    >cmdutil /pause replication /o 10.10.12.10
  • On the source Core for a single protected machine.(-protectedserver):
    >cmdutil /pause replication /protectedserver 10.10.12.97
  • On target Core (-incoming).

    If the local Core is a target Core, the administrator can pause replication by specifying the source Core using the incoming parameter:

    >cmdutil /pause replication /i 10.10.12.25

Usage

The usage for the command is as follows:

/pause [snapshot | vmexport | replication] -core [host name] -user [user name] -password [password] -all | -protectedserver [name | IP address] -incoming [host name] | outgoing [host name] -time [time string]

Command Options

The following table describes the options available for the pause command:

Table 45: Pause command options
Option Description
-?
Display this help message.
-pause
[snapshots], [replication] or [vmexport].
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-all
Optional. Pause all agents on the selected Core.
-protectedserver
Optional. Pause current protected server.
-incoming
Optional. Host name of the remote core that replicates to the core machine.
-outgoing
Optional. Host name of the remote target core to which data is replicated.
-time
Optional. The time in the format ‘Day-Hours-Minutes’ when the snapshots will be resumed (only for snapshots pause).

Examples:

Pause creating snapshots for a specific protected server:

>cmdutil /pause snapshot -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.4

Pause creating snapshots for a protected machine and resume it after three days, 20 hours, and 50 minutes:

>cmdutil /pause snapshot -core 10.10.10.10 -user administrator -password 23WE@#$sdd -protectedserver 10.10.10.4 -time 3-20-50

Pause export to virtual machine for all protected machines on the core:

>cmdutil /pause vmexport -core 10.10.10.10 /user administrator -password 23WE@#$sdd –all

Pause outgoing replication on the core for a specific protected machine:

>cmdutil /pause replication –core 10.10.10.10 -user administrator -password 23WE@#$sdd –protectedserver 10.10.1.76

Pause outgoing replication for all protected machines on the target core:

>cmdutil /pause replication -core 10.10.10.10 -user administrator -password -23WE@#$sdd –outgoing 10.10.1.63

Pause incoming replication for all machines on the target core:

>cmdutil /pause replication –core 10.10.10.10 -user administrator -password 23WE@#$sdd –incoming 10.10.1.82

Protect

The protect command adds a server under protection by a core.

Usage

The usage for the command is as follows:

/protect -core [host name] -user [user name] -password [password] -repository [name] -agentname [name | IP address] -agentusername [user name] -agentpassword [password] -agentport [port] -volumes [volume names]

Command Options

The following table describes the options available for the protect command:

Table 46: Protect command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-repository
Name of a repository on the Core to which the protected machine data should be stored. The name must be enclosed in double quotes.
-agentname
Name or IP address of the server you want to protect.
-agentusername
User name for the server to be protected.
-agentpassword
Password for the server to be protected.
-agentport
Protected server port number.
-volumes
List of volumes to protect. Values must be enclosed in double quotes and separated by a space. Do not use trailing slashes in volume names; for example: “c:” “d:”.

Example:

Protect specific volumes of a server with the Core:

>cmdutil /protect -core 10.10.10.10 -username administrator -password 23WE@#$sdd -repository “Repository 1” -agentname 10.10.9.120 -agentport 5002 -agentusername administrator agentpassword 12345 -volumes “c:” “d:”

ProtectCluster

The protectcluster command adds a cluster under protection by a core.

Usage

The usage for the command is as follows:

/protectcluster -core [host name] -user [user name] -password [password] -repository [name] -clustername [name | IP address] -clusterusername [user name] -clusterpassword [password] -clusterport [port] -clustervolumes [volume names] -clusternodes [cluster nodes collection]

Command Options

The following table describes the options available for the protectcluster command:

Table 47: ProtectCluster command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-repository
Name of a repository on the Core to which the protected machine data should be stored. The name must be enclosed in double quotes.
-clustername
Name or IP address of the cluster you want to protect.
-clusterusername
User name for the cluster to be protected.
-clusterpassword
Password for the cluster to be protected.
-clusterport
Protected cluster server port number.
-clustervolumes
List of volumes to protect. Values must be enclosed in double quotes and separated by a space. Do not use trailing slashes in volume names; for example: “c:” “d:”.
-clusternodes
List of the cluster nodes and the volumes you want to protect on each node.

Example:

Protect specific volumes of a cluster server with the Core:

>cmdutil /protectcluster -core 10.10.10.10 -username administrator -password 23WE@#$sdd -repository “Repository 1” -clustername 10.10.8.150 -clusterport 8006 -clusterusername clusterAdmin clusterpassword password -volumes “C:\ClusterStorage\Volume1” -clusternodes nodeName 10.10.8.150 volumes “c:” nodeName 10.10.8.151 volumes “c:”

ProtectEsxServer

You can use the protectesxserver command whenever you want to add a VMware ESX(i) virtual machine to protection.

Usage

The usage for the command is as follows:

/protectesxserver -core [host name] -user [user name] -password [password] -repository [repository name] -server [name | IP address] -serverusername [user name] -serverpassword [password for server login] -serverport [port] -virtualMachines [virtual machines collection | all] -autoProtect [object ID or name collection]

Command Options

The following table describes the options available for the protectesxserver command:

Table 48: ProtectEsxServer command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. The user name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. The password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-repository
Required. The name of the repository that is associated with the Core that you want to use to protect the virtual machine.
Note: You must enclose the name in double quotes.
-server
The name or IP address for the vCenter or ESXi server you want to protect.
-serverusername
The user name for logging in to the vCenter or ESXi server that you want to protect.
-serverpassword
The password for logging in to the vCenter or ESXi server that you want to protect.
-serverport
Optional. The port number for the vCenter or ESXi server that you want to protect.
-virtualmachines
Optional. This option lets you list the virtual machines that you want to protect.
-autoprotect
Optional. This option lets you list new virtual machines that you want to automatically protect.

Example:

Protect specific virtual machines from a vCenter or ESXi server with the Core:

>cmdutil /protectesxserver -core 10.10.10.10 -user admin -password password -repository "Repository 1" -server 10.10.8.150 -serverport 443 -serverusername root -serverpassword password -virtualmachines "VM1" "VM2" -autoprotect "Folder1"
Related Documents

The document was helpful.

Seleziona valutazione

I easily found the information I needed.

Seleziona valutazione