Chatta subito con l'assistenza
Chat con il supporto

Foglight Resource Optimizer 6.1.0 - Release Notes

Known issues

Known issues

The following is a list of issues known to exist at the time of this release:

Foglight Resource Optimizer for VMware Environments known issues

Defect ID

Known Issue

VFOG-12427

Summary: Foglight Resource Optimizer can reclaim CPU & Memory resources only on one VM at the same time, when the Hot-Add feature was not enabled.

Details:

The Hot-Add feature only can be enabled in VMware® vSphere® Advanced, Enterprise, and Enterprise Plus versions, but not on the Standard version.

Only VM Hardware version 7 or later support the Hot-Add feature.

The Guest OS of the VM also needs to support the Hot-Add feature.

Workaround: For any Hot-Add disabled VMs, do not reclaim CPU & Memory resources at the same time, otherwise, one of the reclaim actions would fail.

VFOG-12306

When upgrading VMware-Optimizer-5_6_16_1.car to version 5.7.0 (or later), follow one of these processes:

  • Upgrade the VMware-Optimizer-5_7_4.car before upgrading Optimizer-5.7.4 car.

  • Disable VMware-Optimizer-5_6_16_1.car before upgrading to Optimizer-5_7_4.car and VMware-Optimizer-5_7_4.car.

VFOG-12221

When reclaiming selected resources based on the Optimizer recommendations, these entries are removed from the recommendations list while the reclaim operation is in progress. When the reclaim operation completes, these recommendations re-appear on the list for a short time (less than 5 minutes). These recommendations are finally removed from the list only after new data has been retrieved (in next 5 minutes).

VFOG-11968

Support resize for hosts using GRUB2 boot loader.

VFOG-11203

Remove platforms that have reached end of life and add support to new releases.

VFOG-11144

Support disk resize on disk without partition.

VFOG-10712

Adding constraints on an ESX Host does not change the recommendations for the VMs residing within that host.

VFOG-9477

When installing the CommonAnalytics-5_6_16.car cartridge, a lot of warnings are reported in the Management Server log file. These warnings refer to deprecated properties, and can be ignored.

VFOG-9104

Implement Storage remediation for SQL Server clusters.

VFOG-7235

Renew the currently used version of NTFS-3G in vOptimizer ISO.

Foglight Resource Optimizer for Hyper-V Environments known issues

Defect ID

Known Issue

VFOG-12221

When reclaiming selected resources based on the Optimizer recommendations, these entries are removed from the recommendations list while the reclaim operation is in progress. When the reclaim operation completes, these recommendations re-appear on the list for a short time (less than 5 minutes). These recommendations are finally removed from the list only after new data has been retrieved (in next 5 minutes).

 

Back to Top

Third party known issues

Third party known issues

There are no known third-party issues specific to this release of Foglight Resource Optimizer.

 

Back to Top

Upgrade and compatibility

Upgrade and compatibility

The latest version of Foglight Resource Optimizer is 6.1.0. 

For upgrade and compatibility information, see the following sections:

Compatibility information for Foglight Resource Optimizer

The following is a list of product versions and platforms compatible with this Foglight Resource Optimizer release.

Product Name

Product Version

Platform

Foglight Management Server

6.1.0

All platforms supported by this version of the Foglight Management Server

Foglight Agent Manager

6.1.0

All platforms supported by this version of the Foglight Agent Manager

Foglight Evolve

6.1.0

All platforms supported by this version of the Foglight Evolve

 

Upgrading Foglight Resource Optimizer for VMware Environments

The latest version of Foglight Resource Optimizer for VMware Environments is 6.1.x.

Foglight Resource Optimizer 6.1.x requires Management Server version 6.1.x or Foglight Evolve 6.1.x.

Foglight Resource Optimizer for VMware Environments also requires Foglight for VMware version 6.1.x.

 

Note: When upgrading VMware-Optimizer-5_6_16_1.car to version 6.1.0 (or later), follow one of these processes:

  • Upgrade the VMware-Optimizer-6_1_0.car before upgrading Optimizer-6.1.0 car.
  • Disable VMware-Optimizer-5_6_16_1.car before upgrading to Optimizer-6_1_0.car and VMware-Optimizer-6_1_0.car.

 

To upgrade Foglight Resource Optimizer for VMware Environments to version 6.1.0:

  1. Download the following packages from Quest Support Portal:
    • Foglight for VMware version 6.1.0 (which includes the vUsage-Feedback-6_1_0.car, DRP-6_1_0.car, Virtual-VMware-6_1_0.car, and Virtual-VMware-Admin-6_1_0.car cartridge files)
    • Foglight Resource Optimizer version 6.1.0 (which includes the CommonAnalytics-6_1_0.car, vUsage-Feedback-6_1_0.car, DRP-6_1_0.car, Optimizer-6_1_0.car, and VMware-Optimizer-6_1_0.car cartridge files)
    • Foglight Resource Optimizer Automation version 6.1.0 (which includes the OptimizerAutomation-6_1_0.car cartridge file)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. Do not remove the older version of these cartridges. Install the new versions over the older versions. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-6_1_0.car
    2. DRP-6_1_0.car
    3. OptimizerAutomation-6_1_0.car
    4. CommonAnalytics-6_1_0.car
    5. Virtual-VMware-6_1_0.car
      Note: After installing the Virtual-VMware-6_1_0.car cartridge, existing vCenter agents (VC agents) must be updated using the Update Agent button in the VMware Environment > Administration tab.
    6. Virtual-VMware-Admin-6_1_0.car
    7. VMware-Optimizer-6_1_0.car
    8. Optimizer-6_1_0.car
    9. ChangeAnalyzer-6_1_0.car (recommended)
  3. If configuration has been previously edited to support larger environments, please refer to Foglight for VMware Release Notes to restore the configuration.

For cartridge installation instructions, see “Installing Foglight cartridges” in the Foglight Administration and Configuration Help.

 

Upgrading Foglight Resource Optimizer for Hyper-V Environments

The latest version of Foglight Resource Optimizer for Hyper-V Environments is 6.1.x.

Foglight Resource Optimizer 6.1.0 requires Management Server version 6.1.x or Foglight Evolve 6.1.x.

Foglight Resource Optimizer for Hyper-V Environments also requires Foglight for Hyper-V version 6.1.x.

 

To upgrade Foglight Resource Optimizer for Hyper-V Environments to version 6.1.0:

  1. Download the following packages from Quest Support Portal:
    • Foglight for Hyper-V version 6.1.0 (which includes the vUsage-Feedback-6_1_0.car, DRP-6_1_0.car, Virtual-HyperV-6_1_0.car, and Virtual-HyperV-Admin-6_1_0.car cartridge files)
    • Foglight Resource Optimizer version 6.1.0 (which includes the CommonAnalytics-6_1_0.car, vUsage-Feedback-6_1_0.car, DRP-6_1_0.car, Optimizer-6_1_0.car, and HyperV-Optimizer-6_1_0.car cartridge files)
    • Foglight Resource Optimizer Automation version 6.1.0 (which includes the OptimizerAutomation-6_1_0.car cartridge file)
  2. On the Cartridge Inventory dashboard, install the following cartridge files. Do not remove the older version of these cartridges. Install the new versions over the older versions. The sequence of cartridge installation is important because of their dependencies:
    1. vUsage-Feedback-6_1_0.car
    2. DRP-6_1_0.car
    3. OptimizerAutomation-6_1_0.car
    4. CommonAnalytics-6_1_0.car
    5. Virtual-HyperV-6_1_0.car
      Note: After installing the Virtual-HyperV-6_1_0.car cartridge, existing Hyper-V agents must be updated using the Update Agent button in the Hyper-V Environment > Administration tab.
    6. Optimizer-6_1_0.car
    7. Virtual-HyperV-Admin-6_1_0.car
    8. HyperV-Optimizer-6_1_0.car

For cartridge installation instructions, see “Installing Foglight cartridges” in the Foglight Administration and Configuration Help.

 

Back to Top

System requirements

System requirements

Foglight Resource Optimizer 6.1.0 can be installed on Foglight and comes installed on Foglight Evolve 9.3 or Foglight for Virtualization, Enterprise Edition 8.9.3.

For information about system requirements for this release, see section "Hardware requirements and guidelines" in the System Requirements and Platform Support Guide for the product you have installed.

 

Before installing Foglight Resource Optimizer, ensure your system meets the following minimum hardware and software requirements:

Platform, Memory and Hard Disk Space The platform, memory, and hard disk space requirements for the monitored servers must match the Agent Manager requirements. For complete information, see the System Requirements and Platform Support Guide.
Operating System Foglight Resource Optimizer can be installed on any supported Foglight Management Server or Foglight Evolve configuration.

 

Back to Top

Related Documents

The document was helpful.

Seleziona valutazione

I easily found the information I needed.

Seleziona valutazione