Tchater maintenant avec le support
Tchattez avec un ingénieur du support

SharePlex 9.2.9 - Reference Guide

About this guide Conventions used in this guide SharePlex commands SharePlex parameters General SharePlex utilities Database Setup utilities SharePlex environment variables

deactivate config

Use the deactivate config command to gracefully terminate replication for an active configuration. This command stops all Capture activity for the configuration, posts all data currently in the queues, and removes the associated SharePlex processes and queues.

The deactivate config command does not remove a configuration from the system, but only stops replication of its objects until you activate it again. When you deactivate a configuration, it can cause the target data to go out of synchronization if users continue making changes to the configured source objects. Deactivating one configuration on a system does not deactivate other active configurations on the same system.

Deactivating when multiple configurations are active

When replicating from multiple databases on the same source system, use the deactivate config command only if you have named (separate) export queues in each configuration that separate the data streams of those instances. Normally, the data from all replicated instances accumulates in one export queue. When you issue the deactivate config command, it deletes all the data in the export queue (along with the queue itself), including data for configuration(s) you might not want to deactivate. See Chapter 5 of the SharePlex Administrator’s Guide for instructions on creating a configuration using named export queues.

To save time when activating a configuration that is only slightly different than the active one, you do not need to deactivate the active one first. While it is still active, you can copy the active configuration with the copy config command. Change the copy with the edit config command, and then activate the copy. Using this method saves time because SharePlex will not re-analyze the objects that are common to both configurations. SharePlex will only analyze the new objects. (If you deactivate the first configuration before activating the copy, SharePlex will analyze all of the objects. This process takes longer.) Be sure that the first config has completed the activation process before activating the copy.

Usage

Supported sources: Oracle
Supported targets: All
Authorization level: Administrator (1)
Issues on: source system
Related commands: abort config, list config, purge config, remove config, view config 

Syntax

Basic command Remote options
deactivate config filename

[ on host |

on host:portnumber |

on login/password@host |

on login/password@host:portnumber ]

Syntax description

Component Description
filename 

The name of the configuration that you want to deactivate. Configuration names are case-sensitive.

Example:

sp_ctrl(sysA)> deactivate config sales

Remote options

These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.

Option Description
on host

Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA

on host:portnumber

Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA:8304

on login/password@host

Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA

on login/password@host:portnumber

Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304

delete capture queue

Use the delete capture queue command to remove a capture queue that is left over from a deprecated replication route.

Usage

Supported sources: Oracle
Supported targets: All
Authorization level: Operator (2)
Issues on: source system
Related commands: delete export queue, delete post queue, delete export process

Syntax

Basic command Command options Remote options

delete capture queue for datasource

None

[ on host |

on host:portnumber |

on login/password@host |

on login/password@host:portnumber ]

Syntax description

Component Description
datasource

The datasource of the capture queue as shown in the Queue Name field of the lstatus command output:

sp_ctrl (mysys)> lstatus on sys102
 Type    # Msgs   Size (Mb)  Age (mn) Oldest Msg Time    Newest Msg Time
------- --------- ---------- -------- ------------------ ------------------
Capture         0          2        0 11-Jan-16 11:16:02 11-Jan-16 11:16:02
  Queue Name:       o.ora112
Export          0          9        0 10-Jan-16 23:44:54 10-Jan-16 23:44:54
  Queue Name:       sysl02
  DataSrc-DataDst:  o.ora112-o.ora112

Remote options

These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.

Option Description
on host

Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA

on host:portnumber

Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA:8304

on login/password@host

Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA

on login/password@host:portnumber

Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304

delete export process

Use the delete export process command to remove an Export process that is left over from a deprecated replication route.

Usage

Supported sources: Oracle
Supported targets: All
Authorization level: Operator (2)
Issues on: source system
Related commands: delete capture queue, delete export queue, delete post queue

Syntax

Basic command Command options Remote options

delete export process to host

queue queuename

[ on host |

on host:portnumber |

on login/password@host |

on login/password@host:portnumber ]

Syntax description

  Description
host The name of the target system.
queue queuename

Use if there are multiple Export processes on the system through the use of named export queues. For queuename, specify the name of the export queue that is linked to the Export you want to delete.

To view the Export processes and their queues, use the show export command, as shown in this example:

sp_ctrl (sys1:8567)> show export
Host   : sysl
Queue  : expquel
                           Kbytes
Target     Status          Exported     Since              Total       Backlog
---------- --------------- ------------ ------------------ ---------- ----------
sys2       Idle            245690       05-Feb-16 18:17:39 245690     0

Deleting an Export process also deletes the post queue and Post process that are associated with it on the target system.

Remote options

These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.

Option Description
on host

Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA

on host:portnumber

Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA:8304

on login/password@host

Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA

on login/password@host:portnumber

Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304

delete export queue

Use the delete export queue command to remove an export queue that is left over from a deprecated replication route.

Usage

Supported sources: Oracle
Supported targets: All
Authorization level: Operator (2)
Issues on: source system
Related commands: delete capture queue, delete post queue, delete export process

Syntax

Basic command Command options Remote options

delete export queue queuename

None

[ on host |

on host:portnumber |

on login/password@host |

on login/password@host:portnumber ]

Syntax description

Component Description
queuename

The name of the export queue, as shown in the Queue Name field of the lstatus command:

sp_ctrl (mysys)> lstatus on sys102

 Type    # Msgs   Size (Mb)  Age (mn) Oldest Msg Time    Newest Msg Time
------- --------- ---------- -------- ------------------ ------------------
Capture         0          2        0 11-Jan-16 11:16:02 11-Jan-16 11:16:02
  Queue Name:       o.ora112
Export          0          9        0 10-Jan-16 23:44:54 10-Jan-16 23:44:54
  Queue Name:       sysl02
  DataSrc-DataDst:  o.ora112-o.ora112

Remote options

These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.

Option Description
on host

Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA

on host:portnumber

Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on SysA:8304

on login/password@host

Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA

on login/password@host:portnumber

Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.

Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation