Tchater maintenant avec le support
Tchattez avec un ingénieur du support

LiteSpeed for SQL Server 8.9.8 - Installation Guide

TSM Examples

Following are several TSM examples. For more information about the LiteSpeed extended stored procedures and command-line utilities, please refer to the LiteSpeed User Guide.

Back up Database to TSM Using SQL 

The following command backs up the database:

exec master.dbo.xp_backup_database
@database = 'pubs_50gb'
, @tsmclientnode = 'testsystemwas'
, @tsmclientownerpwd = 'password'
, @tsmobject = 'TWAS1_50GB\All_pubs50gb_Backups\pubs50gb_FirstBackup'
, @tsmconfigfile = 'C:\Program Files\Tivoli\tsm\api\SAMPSRC\dsm.opt'
, @init = 1
, @AdaptiveCompression = 'Speed'

In this example, LiteSpeed backs up the database pubs_50gb by:

  • Connecting to the tsm server as noted by the tsmserveraddress option specified in the dsm.opt file.
  • Using the client node name and client owner password to authenticate the user to the TSM server.
  • Storing the backup in the TSM name space designated by @tsmobject.
  • (If there is a TSM object with the same name) Versioning the backup using the @init = 1 option.
  • Using Adaptive Compression to optimize backup for speed.

Back Up to TSM with the Passwordaccess Generate Option Using SQL

If the Passwordaccess Generate option is specified in the dsm.opt file, then the node name and password are not required:

exec master.dbo.xp_backup_database
@database = 'Northwind'
, @tsmobject = 'fsMH\nw\Northwind_%z'
, @tsmconfigfile = 'C:\program files\Tivoli\TSM\baclient\dsm.opt'
, @compressionlevel = 1
, @tsmmanagementclass = N'SPS_MGTD'
, @init = 1

Use Command-Line to Back Up to TSM

Use the following command to back up the "Northwind" database:

sqllitespeed -Bdatabase -DNorthwind -i"fsMH\nw\testcmd" -c"10.0.1.200" -k"password" -j"c:\program files\Tivoli\TSM\baclient\dsm.opt" --AdaptiveCompression "Speed" -z"SPS_MGTD" S"MyServer\Instance" -T

This will back up the "Northwind" database with the following options:

To the unique location

fsMH\nw\testcmd

Where:

  • fsMH is TSM filespace
  • nw is TSM high level
  • testcmd is TSM low level

(If backing up to a non-unique location, use -I parameter.)

From the client node

10.0.1.200

(As set up with the TSM server. In this example that node name is the IP address of the client.)

Connecting to the server instance MyServer\Instance
Using a trusted connection (Instead of passing the username -U and password -P.)
Connecting with the client password "password"
Using the TSM option file C:\Program Files\Tivoli\TSM\baclient\dsm.opt
Using the Adaptive Compression option Optimize for speed
Using the specified management class

SPS_MGTD

(If not specified, LiteSpeed uses the default management class.)

Use Command-Line to Back Up to TSM with the Passwordaccess Generate Option

If the Passwordaccess Generate option is specified in the dsm.opt file, you can use the following command:

sqllitespeed -Bdatabase -D"Northwind" -i"fsMH\nw\Northwind_%z" -j"C:\program files\Tivoli\TSM\baclient\dsm.opt" -C1 -I -S"MyServer\Instance" -T

Restore Database from TSM Using SQL

Exec master.dbo.xp_restore_database
@database = 'pubs4'    
, @with = 'move ''pubs'' to ''C:\test\pubs4.mdf''' 
, @with = 'move ''pubs_log'' to ''C:\test\pubs4_log.ldf'''  
, @tsmclientnode = 'nodet1'  
, @tsmobject = 'm1\pubs_mb\test1'  
, @tsmclientownerpwd = 'password'  
, @tsmconfigfile = 'C:\Program Files\Tivoli\tsm\api\SAMPSRC\dsm.opt'  

Verify TSM Backup Using SQL

exec master.dbo.xp_restore_verifyonly
@tsmclientnode = 'nodet1'    
, @tsmclientownerpwd = 'nodet1'  
, @tsmobject = 'm1\pubs_mb\test1'  
, @tsmconfigfile = 'C:\Program Files\Tivoli\tsm\api\SAMPSRC\dsmmt.opt'  

Restore File List Only from TSM Using SQL

Exec master.dbo.xp_restore_filelistonly
@tsmclientnode = 'nodet1'    
, @tsmclientownerpwd = 'password'  
, @tsmobject = 'm1\pubs_mb\test1'  
, @tsmconfigfile = 'C:\Program Files\Tivoli\tsm\api\SAMPSRC\dsmmt.opt'  

Striped Backup To TSM Using SQL

exec master.dbo.xp_backup_database
@database = 'Northwind'
, @tsmobject = 'fsMH\nw\stripetest01'
, @tsmobject = 'fsMH\nw\stripetest02'
, @tsmobject = 'fsMH\nw\stripetest03'
, @tsmobject = 'fsMH\nw\stripetest04'
, @tsmclientnode = '10.0.1.200'
, @tsmclientownerpwd = 'password'
, @tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'
, @init = 1

Striped Restore from TSM Using SQL

Verify Striped Backup

exec master.dbo.xp_restore_verifyonly
@tsmobject = 'fsMH\nw\stripetest01'
,@tsmobject = 'fsMH\nw\stripetest02'
,@tsmobject = 'fsMH\nw\stripetest03'
,@tsmobject = 'fsMH\nw\stripetest04'
,@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

Restore Header Only

exec master.dbo.xp_restore_headeronly
@tsmobject = 'fsMH\nw\stripetest01'
,@tsmobject = 'fsMH\nw\stripetest02'
,@tsmobject = 'fsMH\nw\stripetest03'
,@tsmobject = 'fsMH\nw\stripetest04'
,@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

Restore File List Only

exec master.dbo.xp_restore_filelistonly  
@tsmobject = 'fsMH\nw\stripetest01'
,@tsmobject = 'fsMH\nw\stripetest02'
,@tsmobject = 'fsMH\nw\stripetest03'
,@tsmobject = 'fsMH\nw\stripetest04'
,@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

Restore from Striped Backup

exec master.dbo.xp_restore_database
@database = 'Northwind'
,@tsmobject = 'fsMH\nw\stripetest01'
,@tsmobject = 'fsMH\nw\stripetest02'
,@tsmobject = 'fsMH\nw\stripetest03'
,@tsmobject = 'fsMH\nw\stripetest04'
,@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

Striped Backup to TSM Using the Command Prompt

sqllitespeed -Bdatabase -DNorthwind -i"fsMH\nw\testcmd1" -i"fsMH\nw\testcmd2" -i"fsMH\nw\testcmd3" -c"10.0.1.200" -k"password" -j"c:\program files\Tivoli\TSM\baclient\dsm.opt" -I -S"MyServer\Instance" -T

Striped Restore from TSM Using the Command Prompt

sqllitespeed -RDatabase -j"c:\program files\Tivoli\TSM\baclient\dsm.opt" -i"fsMH\nw\testcmd1" --TSMPointInTime "2011-04-12 11:46:48" -i"fsMH\nw\testcmd3" --TSMPointInTime "2011-04-12 11:46:48" -i"fsMH\nw\testcmd2" --TSMPointInTime "2011-04-12 11:46:48" -N1 -DNorthwind c"10.0.1.200" -k"password"-S"MyServer\Instance" -T

View Filespaces Associated with a Client Node

exec master.dbo.xp_view_tsmfilespaces
@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

View Contents of TSM Filespace

exec master.dbo.xp_view_tsmcontents
@tsmclientnode = '10.0.1.200'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'
,@tsmfilespace = 'fsMH'

View Information on TSM Management Classes

List all the management classes:

exec master.dbo. xp_view_tsmmc
@tsmclientnode = '10.0.1.208'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

List information about a specific management class:

exec master.dbo. xp_view_tsmmc
@tsmmanagementclass = 'SPS_MGTD'
,@tsmclientnode = '10.0.1.208'
,@tsmclientownerpwd = 'password'
,@tsmconfigfile = 'C:\Program Files\Tivoli\TSM\baclient\dsm.opt'

Bind an Object to a New Management Class

exec master.dbo.xp_rebind_tsmmc
@tsmclientnode = '10.0.1.113'
,@tsmclientownerpwd = 'password'
,@TSMMANAGEMENTCLASS = 'STD_MGT_CLASS_B'
,@tsmobject = 'w2k10\HL1\LL2'
,@tsmconfigfile = 'c:\Program Files\Tivoli\TSM\api\dsm.opt'

Delete an Object in TSM Using the Command-Line

SLSMedia.exe -r tsm:file space\high level\low level --TSMConfigFile C:\ProgramFiles\Tivoli\tsm\api\dsm.opt

The above command deletes the TSM object.

usage: SLSMedia {operation} {options}
operation:
-?|--ShowHelp [<help topic>]
-d|--Download <source url> <target filename>
-r|--Remove <object>
-l|--List <object>
-b|--TSMBind <tsm_name>
-q|--TSMQuery <tsm_type>

NOTE: You can only delete an object in this manner if the TSM management policy set for the node allows it. Your TSM administrator will be able to advise you on your TSM policy settings.

Caution: Be careful when deleting objects. LiteSpeed places no restrictions on the objects to be deleted, which means it is possible to delete one object from a striped backup set, rendering the backup set useless.

Delete Old Backups

Delete full, differential and transaction log TSM backups created before 06/15/2012, using the PASSWORDAccess generate option to connect to the TSM Server:

exec master.dbo.xp_slsSmartCleanup
@database = N'test_tsm'
, @tsmconfigfile = N'C:\Program Files\Tivoli\TSM\baclient\dsm_gp.opt'
, @BackupExpiration = '2012-06-15'
, @LogExpiration = '2012-06-15'

For more information, see xp_slsSmartCleanup.

Delete transaction log TSM backups created more than 10 days ago, using the PASSWORDAccess generate option to connect to the TSM Server:

SLSSmartCleanup.exe --Database test_tsm --TSMConfigFile "C:\Program Files\Tivoli\TSM\baclient\dsm_gp.opt" --LogRetainDays 10 --WindowsAuth

For more information, see SmartCleanup Command-Line Arguments.

Convert a TSM Backup to a LiteSpeed Disk Backup

You can use the following command to convert a TSM backup to a LiteSpeed disk backup to be able to restore it on a machine that does not have TSM installed:

slsrecast.exe -j "c:\tsmconfig.opt" -E tsmbkp:fs\highlevel\lowlevel -F "c:\new.bkp"

For more information, see Recast LiteSpeed Backups.

 

Related Topics

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation