Tchater maintenant avec le support
Tchattez avec un ingénieur du support

SharePlex 11.0 - SharePlex Installation and Setup Guide

About this Guide Conventions used in this guide Revision History SharePlex pre-installation checklist Download the SharePlex installer Installation and setup for Oracle cluster Installation and setup for remote capture Install SharePlex on Linux and UNIX Assign SharePlex users to security groups Set up an Oracle environment for replication Set up replication from Oracle to a different target type Generic SharePlex demonstration-all platforms Advanced SharePlex demonstrations for Oracle Advanced SharePlex Demonstrations for PostgreSQL Solve Installation Problems Database Setup Utilities General SharePlex Utilities Uninstall SharePlex Advanced installer options Install SharePlex as root Run the installer in unattended mode SharePlex installed items

Set up replication from Oracle to other Open Targets

Set up Replication from Oracle to Other Open Targets

Overview

SharePlex can connect to a database that supports Open Database Connectivity (ODBC).

These instructions contain setup instructions that are specific to this target. Install SharePlex on the source and target according to the appropriate directions in this manual before performing these setup steps.

For the versions, data types and operations that are supported when using SharePlex to replicate to this target, see the SharePlex Release Notes.

Review column names

To support replication between a source of one database type and a target of another type, the letter case of the names of the source and target columns must be the same, for example the column names on both sides in lower case or both sides in upper case. If the case differs between the source and target column names, use the column mapping feature to map the column names in the configuration file.

See SharePlex Administration Guide for more information about column mapping with SharePlex.

Configure SharePlex on the source

Set up SharePlex and the database on the Oracle source system as follows.

Make keys available to SharePlex

To replicate from an Oracle source to an Open Target target, you must make key information available to SharePlex.

Enable Oracle supplemental logging

Enable PK/UK supplemental logging in the Oracle source database. SharePlex must have the Oracle key information to build an appropriate key on the target.

Set SP_OCT_USE_SUPP_KEYS parameter

Set the SP_OCT_USE_SUPP_KEYS parameter to a value of 1. This parameter directs SharePlex to use the columns set by Oracle's supplemental logging as the key columns when a row is updated or deleted. When both supplemental logging and this parameter are set, it ensures that SharePlex can always build a key and that the SharePlex key will match the Oracle key.

See the SharePlex Reference Guide for more information about this parameter.

Configure replication

On the source, create a SharePlex configuration file that specifies capture and routing information.

Datasource:o.SID

src_owner.table

tgt_owner.table

host@r.database_name

where:

  • SID is the Oracle SID of the source Oracle database..
  • src_owner.table is the owner and name of the source table.
  • tgt_owner.table is the owner and name of the target table.*
  • host is the name of the target system.
  • database_name is the name of the target database.

* Important! If target owner or table name is defined in the database as anything other than UPPERCASE, be certain to:

  • Type the name in the correct case.

  • Enclose the name in quotation marks, for example "MySchema"."MyTable".

  • To support replication between a source of one database type and a target of another type, the letter case of the names of the source and target columns must be the same, for example the column names on both sides in lower case or both sides in upper case. If the case differs between the source and target column names, use the column mapping feature to map the column names in the configuration file.

Note: This is a basic one-source, one-target configuration using no additional SharePlex configuration features. See "Configure SharePlex to replicate data" in the SharePlex Administration Guide for important information about creating a configuration file and for additional setup instructions for more complex replication scenarios.

Source configuration example

The following configuration file replicates table HR.Emp from Oracle instance ora112 to target table region1.emp in database mydb on target system sysprod. The source table is case-sensitive.

Datasource:o.ora112

HR."Emp" region1.emp sysprod@r.mydb

Configure SharePlex on the target

Configure SharePlex and the database on the target system as follows.

Note: Make certain that the database setup meets all of the requirements in Open Target Checklist .

Install the ODBC driver

Make certain to download the correct ODBC driver for your database.

Set up ODBC

  1. Install and test the ODBC driver that is appropriate for your target database. SharePlex provides the OTS utility for testing the ability of SharePlex to connect to and post through ODBC. For more information, see the OTS documentation in theSharePlex Reference Guide.
  2. On the target system, configure ODBC connection information for use by Post to connect to the target database. You have the following options for configuring this connection information:

    • On Unix and Linux, you can do either of the following:

      • Configure a user or system DSN on the target system according to the instructions provided with the database. Test the DSN by using it to connect to the target database. If the connection is successful, copy the ODBC configuration files to the odbc subdirectory of the SharePlex variable-data directory. Set the LD_LIBRARY_PATH environment variable to the location of the database ODBC driver.

        or...

      • Set the ODBC connection information in the Post configuration. See Set connection information with the connection command.

Set connection information with the connection command

Use the connection command to:

  • Set the Post user name and password if you created a DSN.
  • Set all of theODBC connection information if a DSN does not exist.

To set connection information:

  1. Create a user account for SharePlex in the target database. This account must be granted the privileges to connect, query the metadata structures of the database, create and update tables in the SharePlex database or schema, and perform full DML and supported DDL operations. Make certain that this user can connect successfully to the database through ODBC outside SharePlex.
  2. Run sp_ctrl.
  3. Execute the connection command with the set option, once for each keyword.

    connection r.database_name set keyword=value

Option 1: Input when a DSN exists
Keyword Value to enter

user

The database user assigned to SharePlex

password

The password for the SharePlex user

dsn

The DSN of the database.

IMPORTANT! user, password, and dsn are the only required keywords if a DSN exists.

Option 2: Input when a DSN does not exist (Unix and Linux)
Keyword Value to enter

user

The database user assigned to SharePlex

password

The password for the SharePlex user

port

The database port number.

server

The name or IP address of the database server.

driver

The full path to the ODBC driver on the database server.

Option 3: Connect string when a DSN does not exist (Unix and Linux)
Keyword Value to enter

user

The database user assigned to SharePlex

password

The password for the SharePlex user

connect_string A user-defined connection string. When using your own connection string, make certain it includes all of the required elements to make a successful ODBC connection, but omit the user name and password. Use the connection command with the user and password options to supply user information.
Connection command examples
DSN exists

connection r.mydb set user=myuser

connection r.mydb set password=mypassword

connection r.mydb set dsn=mydsn

DSN does not exist

connection r.mydb set user=myuser

connection r.mydb set password=mypassword

connection r.mydb set port=1234

connection r.mydb set server=server1

connection r.mydb set driver=/database/ODBC/lib/databasedriver.so

DSN does not exist, use connection string

connection r.mydb set user=myuser

connection r.mydb set password=mypassword

connection r.mydb set connect_string=”driver=/database/ODBC/lib/databasedriver.so;server=server1;port=1234;uid=myuser;pwd=mypassword”

Remove a connection value

Use connection with the reset option to remove SharePlex connection settings.

To remove a specific connection value:

connection r.database_name reset keyword

To remove all connection values:

connection r.database_name reset

Examples:

connection r.mydb reset port

connection r.mydb reset

View connection values

Use connection with the show option to view SharePlex connection settings.

To view connection values for a database:

connection r.database_name show

To view connection settings for all local databases:

connection show all

Map data types

To support the accurate posting of replicated Oracle ALTER TABLE commands to the correct data types in an Open Target target, SharePlex maps Oracle data types to default data types for the target database. To view and change this mapping, use the typemap command.

Note: For DML operations, SharePlex queries the target database to determine the appropriate data type mapping for replicated data.

For more information about the typemap command, see SharePlex Reference Guide.

Set up replication from Oracle to JMS

Overview

The SharePlex Post process can connect and write to a JMS (Java Messaging Service) queue or topic. The data is written as XML records that include the data definitions, the operation type, and the changed column values. This data is written as a sequential series of operations as they occurred on the source, which can then be posted in sequential order to a target database or consumed by an external process or program.

These instructions contain setup instructions that are specific to this target. Install SharePlex on the source and target according to the appropriate directions in this manual before performing these setup steps.

For the versions, data types and operations that are supported when using SharePlex to replicate to this target, see the SharePlex Release Notes.

Configure SharePlex on the source

When replicating data to JMS, configure the source database and SharePlex on the source system as follows.

Enable supplemental logging

On the source system, enable PK/UK supplemental logging in the Oracle source database. SharePlex must have the Oracle key information to build an appropriate key on the target.

SQL> ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (PRIMARY KEY, UNIQUE) COLUMNS;

Set SP_OCT_USE_SUPP_KEYS parameter

On the source system, set the SP_OCT_USE_SUPP_KEYS parameter to a value of 1. This parameter directs SharePlex to use the columns set by Oracle's supplemental logging as the key columns when a row is updated or deleted. When both supplemental logging and this parameter are set, it ensures that SharePlex can always build a key and that the SharePlex key will match the Oracle key.

See the SharePlex Reference Guide for more information about this parameter.

Configure replication

On the source, create a SharePlex configuration file that specifies capture and routing information. The structure that is required in a configuration file varies, depending on your replication strategy, but this shows you the required syntax for routing data through a JMS queue or topic.

Datasource:o.SID
src_owner.table !jms[:tgt_owner.table] host

where:

  • SID is the Oracle SID of the source Oracle database.
  • src_owner.table is the owner and name of the source table.
  • !jms is a required keyword indicating SharePlex is posting to JMS.
  • :tgt_owner.table is optional and specifies the owner and name of the target table. Use if either component is different from that of the source table. Allow no spaces between !jms and :tgt_owner.table. Type case-sensitive names in the correct case and enclose them within double quotes, as in "MySchema"."MyTable"
  • host is the name of the target system.

Note: For more information, see Configure Data Replication.

Source configuration example

Datasource:o.ora112

MY_SCHEMA.MY_TABLE !jms:"MySchema2"."MyTable2" sysprod

Configure SharePlex on the target

These instructions establish the Java provider on the target and configure the SharePlex Post process to connect to a JMS provider.

Prerequisites

Java Runtime Environment 1.8 or later. JRE 1.8 (or later) is required and installed along with SharePlex except on the following operating systems:

  • CentOS Linux 7.x and 8.x
  • Oracle Linux 7.x and 8.x
  • RHEL Linux 7.x and 8.x

Prior to installing SharePlex on one of these systems, ensure JRE 1.8 (or later) is installed. Then after installing SharePlex, modify the bridge configuration file to point to the JRE binary. See the "Custom JRE" steps in each of the following procedures.

Using a JRE version later than 1.8. If you are using JMS Provider libraries compiled with a version of JRE later than 1.8, use that later version of JRE and modify the bridge (Linux/Unix) configuration file to point to that JRE binary. See the "Custom JRE" steps in each of the following procedures.

Configure SharePlex on the JMS target

These instructions configure the SharePlex Post process to post to a JMS queue or topic.

NoteS:
  • The JMS Provider does not necessarily need to be installed on the same machine where SharePlex is running, but you will need to copy the Provider's JMS libraries to a location in the SharePlex installation directory according to these instructions.
  • Ensure that you are using a compatible version of client libraries for your JMS Provider.
  • SharePlex is distributed with JRE 1.8. If the JMS libraries for the JMS Provider you are using are compiled with a JRE version later than 1.8, modify the bridge (or bridge.ini) configuration file as described here. Otherwise, SharePlex returns an error similar to one of the following.

INFO 2016-05-10 01:43:42.000860 [x.jms+jsd-olinux-01] com.quest.shareplex.openbridge.stomp.internal.Connector - Connector x.jms+jsd-olinux-01 at tcp://localhost:61613 stopped.

ERROR 2016-05-10 01:43:42.000861 [x.jms+jsd-olinux-01] com.quest.shareplex.openbridge.stomp.internal.Connector - org/apache/activemq/jndi/ActiveMQInitialContextFactory : Unsupported major.minor version 51.0

java.lang.UnsupportedClassVersionError: org/apache/activemq/jndi/ActiveMQInitialContextFactory : Unsupported major.minor version 51.0

The following directory naming conventions are used in the examples in this procedure:

Name Directory
SharePlex The SharePlex installation directory

To configure post to the JMS target:

  1. Create a directory for your Provider under SharePlex/lib/providers. For example:

    shareplex/lib/providers/provider_name

    If your Provider is Active MQ, the path may look similar to the following:

    shareplex/lib/providers/amq

  2. Copy the client library files you require to the provider_name directory.

    For example, if your Provider is Active MQ, you might copy the following JAR files to the amq directory.

    shareplex/lib/providers/amq/activemq-all.jar

    shareplex/lib/providers/amq/slf4j.jar

  3. (Custom JRE) If you are using a JRE version later than 1.8, set the JAVA_HOME and JRE_HOME variable values to the path to your JRE home directory. In addition, add the JAVA_HOME path to the PATH variable.
  4. (Custom JRE) If you are using a JRE other than the one installed with SharePlex which is 1.8.0_312 (e.g., SharePlex did not install JRE on your operating system or you must use a JRE version later than 1.8), modify the bridge.ini or bridge file to point to the JRE binary you intend to use.

    Use the following methods:

    • On Linux or Unix:

      1. The bridge file is located in the following directory:

        SharePlex/.app-modules/openbridge

      2. If a JRE was installed during the SharePlex installation, it is located in the following directory:

        SharePlex/.app-modules/openbridge/jre

      3. In the bridge file, locate the _jvm option (for example< _jvm = "jre/bin/java") and replace the current path with the full path to the JRE you intend to use. You must specify the absolute path to your JRE, not the relative path.

  5. Start sp_cop. (Do not activate the configuration yet.)
  6. Run sp_ctrl.
  7. Issue the target command to configure Post to post to the JMS queue or topic. The values you set using the target command tell SharePlex how to instantiate on the target. In the following examples, user-defined values are shown in italics. Replace these with values specific to your JMS Provider and your provider-specific JMS libraries.

    Issue the following commands, as necessary. For detailed descriptions of the properties and values, see View and change JMS settings. For more information about the target command, see the SharePlex Reference Guide.

    If posting to a JMS queue:

    sp_ctrl> target x.jmsset jms factory_class=factory_class

    sp_ctrl> target x.jms set jms provider_url=url

    sp_ctrl> target x.jms set jms lib_location=path

    For example, if using Active MQ you might set the following:

    sp_ctrl> target x.jms set jms lib_location=shareplex/lib/providers/amq

    sp_ctrl> target x.jms set jms queuename=JMS_topic_queuename

    If posting to a JMS topic:

    sp_ctrl> target x.jmsset jms factory_class=factory_class

    sp_ctrl> target x.jms set jms provider_url=url

    sp_ctrl> target x.jms set jms lib_location=path

    For example, if using Active MQ you might set the following:

    sp_ctrl> target x.jms set jms lib_location=shareplex/lib/providers/amq

    sp_ctrl> target x.jmsset jms destination=topic

    sp_ctrl> target x.jms set jms queuename=JMS_topic_queuename

Enable logs for JMS replication

We need to implement the logging mechanism with a different approach than the one we used earlier for legacy framework. In the current version, we have removed the -OB_debugToLog, -OB_debugToConsole parameters. Now, users get more control to generate and retain the log details by resetting properties inside the log4j2.properties file.

To enable the logs for JMS, follow the below steps:

  1. Navigate to <Prod/Opt_Directory>/.app-modules/openbridge/configuration/ location and update the required parameters in the log4j2.properties file.
  2. Restart SharePlex.
  3. To enable full debug, set rootLogger.level to All. There are other possible values for rootLogger.level which are mentioned in the form of comments in the log4j2.properties file.
  4. To enable console logging, set appender.console.filter.threshold.level to All. There are other possible values for appender.console.filter.threshold.levelwhich are mentioned in the form of comments in the log4j2.properties file.

Note: You can change other parameters as per standard log4j2.properties syntax. Refer to the below link for information.
https://logging.apache.org/log4j/2.x/manual/configuration.html#Properties

View and change JMS settings

To view current property settings for output to JMS, use the following command:

target x.jms show

To change a property setting, use the following command.

target x.jms [queue queuename] set jms property=value

where:

  • queue queuename is the name of a Post queue. Use this option if there are multiple Post processes.
  • property and value are shown in the following table.

Table 1: JMS target properties

Property Input Value Default

factory_class=factory_class

Required Fully qualified class name of the factory class. Sets the JNDI environmental property java.naming.factory.initial to specify the class name of the initial context factory for the provider.

None

provider_url=url

Required RMI URL with no object name component. This sets the JNDI environmental property java.naming.provider.url to specify the location of the registry that is being used as the initial context.

Use the correct format depending your JMS Provider and type of URL. For example, if using LDAP your URL might be similar to the following:

ldap://hostname.company.com/contextName

Ask your JMS Provider Administrator for the JMS Provider URL.

None

lib_location=path

Required Path to the directory where you installed the client library files.

None

destination={queue | topic}

Messaging domain. Valid values are queue (port-to-port) or topic (publisher-subscriber model).

queue

factory_name=factory_name

Name of a JNDI connection factory lookup. You can specify multiple names with a comma-separated list, for example: (jndi.name1, jndi.name2).

None

user=user

Name of the user that is attaching to JMS. If authentication is not required, omit this and the password option.

None

password=password

Password of the JMS user.

None

queuename=JMS_topic_queuename

Name of the JMS queue or topic.

OpenTarget

persistent={yes | no}

yes logs messages to disk storage as part of send operations.

no prevents logging.

yes
session_transacted ={yes | no}

no directs Post to issue a JMS commit for every replicated message, making each one immediately visible and consumable. This is the default.

yes directs Post to operate in a transactional manner. In this mode, Post issues a JMS commit (to make messages visible and consumable) at intervals based on the following:

  • Issue a commit before the data is read-released from the Post queue, as controlled by the value set for the SP_OPX_READRELEASE_INTERVAL parameter.
  • Issue a commit every JMS write, as controlled by the value set for the SP_OPX_CHECKPOINT_FREQ parameter, until the SP_OPX_READRELEASE_INTERVAL is reached.

no
properties

Use this option if the JMS provider that you are using cannot consume messages that contain the default set of properties supplied by SharePlex. It enables you to remove or add properties. Supply the properties as a comma-delimited list.

  • To add a property, specify it as name=value.
  • To remove a SharePlex property, prefix the name with a dash. For example this string removes two SharePlex properties: -JMSXDeliveryCount,-JMSXGroupSeq.
None
client_id Use this option if the JMS provider that you are using cannot consume messages that contain the default SharePlex client ID. Set this value to the client ID that your provider accepts. None
commit_frequency

Use this option when Post is configured to post to a JMS server in transactional style (issue a JMS commit at intervals, rather than after every message as directed by the session_transacted property). This parameter specifies the interval between JMS commits. It works in conjunction with the SP_OPX_READRELEASE_INTERVAL parameter. Valid values are 1 to any positive integer.

1500

Set recovery options

If the JMS process aborts suddenly, or if the machine that it is running on aborts, row changes may be written twice to the JMS target. The consumer must manage this by detecting and discarding duplicates.

Every record of every row-change operation in a transaction has the same transaction ID and is also marked with a sequence ID. These attributes are id and msgIdx, respectively, under the txn element in the XML output (see View the XML format).

The transaction ID is the SCN at the time the transaction was committed and the sequence ID is the index of the row change in the transaction. These two values are guaranteed to be the same if they are re-written to the JMS queue in a recovery situation.

If desired, you can configure the target to include additional metadata with every row-change record by using the following command:

target target [queue queuename] set metadata property[, property]

Table 2: Optional JMS metadata properties

Property Description
time The time the operation was applied on the source.
userid The ID of the database user that performed the operation.
trans The ID of the transaction that included the operation.
size The number of operations in the transaction.

Example

target x.jms set metadata time, userid, trans, size

To reset the metadata:

target x.jms [queue queuename] reset metadata

To view the metadata:

target x.jms [queue queuename] show metadata

Control memory settings

If you configured Post to process large amounts of transactions to JMS through multiple named Post queues, you may need to allocate more memory to the Post JMS bridge. The default settings are 256MB and 512MB.

To increase the JMS bridge memory:

Open the openbridge.ini file and set the following parameters in the format shown:

-Xms=512m

-Xmx=1024m

-XX:PermSize=512m

-XX:MaxPermSize=1024m

Configure debugging

You can configure Post to log whether each write to a queue or topic succeeded or failed. This is controlled with the debugging setting.

To enable debugging:

Open the openbridge.ini file and set the -OB_debugToLog parameter to true.

-OB_debugToLog=true

View the XML format

To view the XML formatting of the records that SharePlex sends to JMS, see the format category of the target command documentation in the SharePlex Reference Guide.

Set up replication from Oracle to Kafka

Pre-requisite: When replicating data to the Kafka (Apache and Confluent) target, target SharePlex should be installed only on the Linux platform.

Overview

The SharePlex Post process can connect and write to a Kafka broker. The data can be written in JSON or XML output as a sequential series of operations as they occurred on the source, which can then be consumed by a Kafka consumer.

These instructions contain setup instructions that are specific to this target. Install SharePlex on the source and target according to the appropriate directions in this manual before performing these setup steps.

For the versions, data types and operations that are supported when using SharePlex to replicate to this target, see the SharePlex Release Notes.

Guidelines for posting to Kafka

  • A SharePlex Post process acts as a Kafka producer. A SharePlex Post process can write to one or more topics that have one or more partitions.
  • The SharePlex Post process does not create a topic itself, but you can configure the Kafka broker to auto-create topics.

Configure SharePlex on the source

When replicating data to Kafka, configure the source database and SharePlex on the source system as follows.

Enable supplemental logging

On the source system, enable PK/UK supplemental logging in the Oracle source database. SharePlex must have the Oracle key information to build an appropriate key on the target.

SQL> ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (PRIMARY KEY, UNIQUE) COLUMNS;

Set SP_OCT_USE_SUPP_KEYS parameter

On the source system, set the SP_OCT_USE_SUPP_KEYS parameter to a value of 1. This parameter directs SharePlex to use the columns set by Oracle's supplemental logging as the key columns when a row is updated or deleted. When both supplemental logging and this parameter are set, it ensures that SharePlex can always build a key and that the SharePlex key will match the Oracle key.

See the SharePlex Reference Guide for more information about this parameter.

Configure replication

On the source, create a SharePlex configuration file that specifies capture and routing information. The structure that is required in a configuration file varies, depending on your replication strategy, but this shows you the required syntax for routing data to Kafka.

Datasource:o.SID
src_owner.table !kafka[:tgt_owner.table] host

where:

  • SID is the Oracle SID of the source Oracle database.
  • src_owner.table is the owner and name of the source table.
  • !kafka is a required keyword indicating SharePlex is posting to Kafka.
  • :tgt_owner.table is optional and specifies the owner and name of a target table. Use this feature if you want the data to appear as if it came from a table other than the source table. Allow no spaces between !kafka and :tgt_owner.table. Type case-sensitive names in the correct case and enclose them within double quotes, as in "MySchema"."MyTable"
  • host is the name of the target system.

Note: See Configure SharePlex to replicate data in the Configure Data Replication.

Source configuration example

Datasource:o.ora112

MY_SCHEMA.MY_TABLE !kafka sysprod

Configure SharePlex on the target

These instructions configure the SharePlex Post process to connect to Kafka. You must have a running Kafka broker.

To configure post to Kafka:

  1. Create a Kafka topic.
  2. Start sp_cop. (Do not activate the configuration yet.)
  3. Run sp_ctrl.
  4. Issue the target command to configure posting to a Kafka broker and topic. The following are example commands.

    sp_ctrl> target x.kafkaset kafka broker=host1:9092,host2:9092,host3:9092

    sp_ctrl> target x.kafka set kafka topic=shareplex

    See View and change Kafka settings for command explanations and options.

Note: Specify more than one broker so that SharePlex will attempt to connect to the other brokers in the list if any one of them is down.

Set the Kafka record format

SharePlex can output to either XML or JSON format as input to Kafka. XML is the default. To set the input format and specify format options, use one of the following target commands:

target x.kafka set format record=json

or:

target x.kafka set format record=xml

 

To view samples of these formats, see the format category of the target command documentation in the SharePlex Reference Guide.

Note: When replicating data from Oracle to Kafka in JSON format, SharePlex does not support the varray data type or the varray type inside the SDO_GEOMETRY data type.

View and change Kafka settings

To view current property settings for output to Kafka, use the following target command:

target x.kafka show

To change a property setting, use the following command.

target x.kafka [queue queuename] set kafka property=value

where:

  • queue queuename is the name of a Post queue. Use this option if there are multiple Post processes.
  • property and value are shown in the following table.

Table 3: Kafka target properties

Property Input Value Default
broker=broker

Required. The host and port number of the Kafka broker, or a comma delimited list of multiple brokers. This list is the bootstrap into the Kafka cluster. So long as Post can connect to one of these brokers, it will discover any other brokers in the cluster.

localhost:9092
client_id=ID

Optional. A user-defined string that Post will send in each request to help trace calls.

None
compression.code={none, gzip, snappy} Optional. Controls whether data is compressed in Kafka. Options are none, gzip or snappy. None
partition={number | rotate | rotate trans}

Required. One of the following:

  • A fixed partition number: Directs Post to post messages only to the specified partition number. For example, setting it to 0 directs Post to post only to partition 0. This option is suitable for use in testing or if the target has multiple channels of data posting to the same Kafka topic.
  • The keyword rotate: Directs Post to apply messages to all of the partitions of a topic in a round-robin fashion. The partition changes with each new message. For example if a topic has three partitions, the messages are posted to partitions 0,1,2,0,1,2, and so on in that order.
  • The keyword rotate trans: This is similar to the rotate option, except that the partition is incremented with each transaction rather than with each message. For example, if a topic has three partitions, the messages are posted to partition 0 until the commit, then to partition 1 until the commit, and so on in that order. This option is suitable if you are replicating multiple tables to a single topic. It allows you to distribute data across several partitions, while still preserving all of the operations of a transaction together in a single partition. This enables a consumer that reads from a single partition to receive a stream of complete transactions.
0
request.required.acks=value

Optional. This is a Kafka client parameter. By default it is set to a value of -1, which means all. Consult the Kafka documentation about this subject, because all really means all in-sync replicas. This parameter can be used in conjunction with the min.insync.replicas broker parameter to tune behavior between availability and data consistency.

Important: It is possible for data to be lost between a Kafka producer (SharePlex in this case) and a Kafka cluster, depending on these settings.

-1
topic=topic_name

Required. The name of the target Kafka topic.

This string may contain the special sequences %o or %t. The %o sequence is replaced by the owner name of the table that is being replicated. The %t sequence is replaced by the table name of the table that is being replicated. This feature may be used in conjunction with a Kafka server setting of auto.create.topics.enabled set to 'true'. Also view your server settings for default.replication.factor and num.partitions because these are used as defaults when topics are auto created.

Important! If using multiple topics, you must also set the following properties with the target command:
  • The output must be in JSON. Set the record property of the format category to json:

    target x.kafka set format record=json

  • Commits must be disabled. Set the commit property of the json category to no:

    target x.kafka set json commit=no

shareplex

* To avoid latency, if Post detects no more incoming messages, it sends the packet to Kafka immediately without waiting for the threshold to be satisfied.

Set recovery options

If the Kafka process aborts suddenly, or if the machine that it is running on aborts, row changes may be written twice to the Kafka topic. The consumer must manage this by detecting and discarding duplicates.

Every record of every row-change operation in a transaction has the same transaction ID and is also marked with a sequence ID. These attributes are id and msgIdx, respectively, under the txn element in the XML output (see Set up Replication from Oracle to Kafka).

The transaction ID is the SCN at the time the transaction was committed, and the sequence ID is the index of the row change in the transaction. These two values are guaranteed to be the same if they are re-written to the Kafka topic in a recovery situation.

If desired, you can configure Post to include additional metadata with every row-change record by using the following command:

target x.kafka [queue queuename] set metadata property[, property]

Table 4: Optional metadata properties

Property Description
time The time the operation was applied on the source.
userid The ID of the database user that performed the operation.
trans The ID of the transaction that included the operation.
size The number of operations in the transaction.

Example:

target x.kafka set metadata time, userid, trans, size

To reset the metadata:

target x.kafka [queue queuename] reset metadata

To view the metadata:

target x.kafka [queue queuename] show metadata

Set up replication from Oracle to a SQL or XML file

Overview

SharePlex can post replicated Oracle data to a file formatted as SQL or XML. This data is written as a sequential series of operations as they occurred on the source, which can then be posted in sequential order to a target database or consumed by an external process or program.

These instructions contain setup instructions that are specific to this target. Install SharePlex on the source and target according to the appropriate directions in this manual before performing these setup steps.

For the versions, data types and operations that are supported when using SharePlex to replicate to this target, see the SharePlex Release Notes.

Configure SharePlex on the source

On the source, create a SharePlex configuration file that specifies capture and routing information. The structure that is required in a configuration file varies, depending on your replication strategy, but this shows you the required syntax for routing data to a SQL or XML file.

Datasource:o.SID
src_owner.table !file[:tgt_owner.table] host

where:

  • SID is the Oracle SID of the source Oracle database.
  • src_owner.table is the owner and name of the source table.

  • !file is a required keyword that directs Post to write to a file.
  • tgt_owner.table is optional and specifies the owner and name of the target table. Use if either component is different from that of the source table.
  • host is the name of the target system.

Note: For more information, see Configure SharePlex to Replicate Data in the SharePlex Administration Guide.

Source configuration example:

The following example replicates the parts table in schema PROD from Oracle instance ora112 to a file on target system sysprod.

Datasource:o.ora112

PROD.parts !file sysprod

Configure SharePlex on the target

By default, SharePlex formats data to a file in XML format, and there is no target setup required unless you want to change properties of the output file (see Set up Replication from Oracle to a SQL or XML File.) To output in SQL format, use the target command to specify the SQL output as follows.

To output data in SQL format:

  1. Start sp_cop.
  2. Start sp_ctrl.
  3. Issue the following required target commands to output the records in SQL.

    Note: Use all lower-case characters.

    target x.file [queue queuename] set format record=sql

    target x.file [queuequeuename] set sql legacy=yes

    where: queue queuename constrains the action of the command to the SharePlex Post process that is associated with the specified queue.

    See Set up Replication from Oracle to a SQL or XML File for descriptions of these settings and other optional properties that you can set.

To view samples of the SQL and XML formats, see the target command documentation in the SharePlex Reference Guide.

View and change target settings

To view current property settings for output to a file, use the following command:

target x.file show

To change a setting, use the following target command.

target x.file [queue queuename] set [category] property=value

For more information, see the target command in the Target.

File storage and aging

Post writes to a series of files. The active working file is prepended with the label of current_ and is stored in the opx/current subdirectory of the variable-data directory.

Output Format Name of Current File
SQL

current_legacy.sql

XML

current_prodsys.XML

Important: Do not open or edit the current_ file.

Post uses the max_records, max_size and max_time parameters to determine the point at which to start a new active file. When this switch occurs, Post moves the processed data to a sequenced file in the opx subdirectory of the variable-data directory. The file names include the name of the post queue, the time and date, and an incrementing ID.

SQL files:

/installed/vardir> ls -1 opx

0000000000_20140305130858_legacy.sql

0000000001_20140305131130_legacy.sql

0000000002_20140305131212_legacy.sql

0000000003_20140305133835_legacy.sql

0000000004_20140305134028_legacy.sql

XML files:

/installed/vardir> ls -1 opx

0000000000_20140305130858_prodsys.XML

0000000001_20140305131130_prodsys.XML

0000000002_20140305131212_prodsys.XML

0000000003_20140305133835_prodsys.XML

0000000004_20140305134028_prodsys.XML

To force a file switch:

The current file cannot be viewed or consumed without stopping Post. To access the data in the current file, you can use the target command with the switch option to move the data to a sequenced file, from which it can then be consumed or viewed. After issuing this command, the switch occurs after Post processes a new record.

target x.file [queue queuename] switch

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation