Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Active Administrator 8.6.2 - User Guide

Active Administrator Overview User Provisioning Certificates Security & Delegation  Active Directory Health
Switching to Active Directory Health Using the Active Directory Health landing page Installing Active Directory Health Analyzer agents Using the Active Directory Health Analyzer agent configuration utility Excluding domain controllers Managing the Remediation Library Analyzing Active Directory health Analyzing Azure Active Directory Managing Active Directory Health Analyzer alerts Managing alert notifications Pushing alerts to System Center Operations Manager and SNMP managers Managing monitored domain controllers Managing data collectors Active Directory Health Templates Managing Active Directory Health Analyzer agents Using the Troubleshooter Recovering Active Directory Health data
Auditing & Alerting Group Policy Active Directory Recovery Active Directory Infrastructure DC Management DNS Management Configuration
Using the Configuration landing page Managing tasks Defining role-based access Setting email server options Configuring SCOM and SNMP Settings Setting notification options Setting Active Template options Setting agent installation options Setting recovery options Setting GPO history options Setting certificate configuration Setting service monitoring policy Managing archive databases Migrating data to another database Setting a preferred domain controller Setting up workstation logon auditing Managing configuration settings Setting user options Managing the Active Directory server
Diagnostic Console Alerts Appendix
Domain controller alerts
Active Directory Certificate Services service is not running Active Directory Domain Services is not running Active Directory Web Services service is not running Consecutive replication failures DC cache hits DC DIT disk space DC DIT log file disk space DC LDAP load DC LDAP response too slow DC Memory Usage DC properties dropped DC RID pool low DC SMB connections DC SYSVOL disk space DC time sync lost Detected NO_CLIENT_SITE record DFS Replication service not running DFS service is not running DFSR conflict area disk space DFSR conflict files generated DFSR RDC not enabled DFSR sharing violation DFSR staged file age DFSR staging area disk space DFSR USN records accepted DFSRS CPU load DFSRS unresponsive DFSRS virtual memory DFSRS working set DNS Client Service is not running Domain controller CPU load Domain controller page faults Domain controller unresponsive File Replication Service is not running File replication (NTFRS) staging space free in kilobytes GC response too slow Group policy object inconsistent Hard disk drive Intersite Messaging Service is not running Invalid primary DNS domain controller address Invalid secondary DNS domain controller address KDC service is not running LSASS CPU load LSASS virtual memory LSASS working set Missing SRV DNS record for either the primary or secondary DNS server NETLOGON not shared NetLogon service is not running Orphaned group policy objects exist Physical memory Power supply Primary DNS resolver is not responding Secondary DNS resolver is not responding Security Accounts Manager Service is not running SRV record is not registered in DNS SYSVOL not shared W32Time service is not running Workstation Service is not running
Domain alerts Site alerts Forest alerts Azure Active Directory Connect alerts
Event Definitions PowerShell cmdlets

Installing the Azure Active Directory Connect Health Monitoring Agent

Previous Next


 Active Directory Health > Analyzing Azure Active Directory > Installing the Azure Active Directory Connect Health Monitoring Agent

Installing the Azure Active Directory Connect Health Monitoring Agent

You must install the Active Administrator® Azure® Active Directory® Connect Health Monitoring Agent on each computer that you want to monitor. Microsoft Azure Active Directory Connect must also be installed on that computer.

Before you begin installation, you need the following information:

•
The path from where you want to run the Active Administrator Azure Active Directory Connect Health Monitoring Agent.
•
The name of the Active Administrator server. To see the server name, select Settings | AA Server.
•
The name of the database server where the Azure Active Directory Connect database is installed and the name of the Azure Active Directory Connect database (ADSync is the default database). Only required if you choose not to use the default database, which is limited to 50,000 objects.
To deploy the Azure Active Directory Connect agent
1
Locate C:\Program Files\Quest\ActiveAdministrator\Server\SLAgent\AADCAgent.
2
Copy all the files in the AADCAgent folder.
3
Locate a folder on the target server where you want to place the files. For example: C:\Data\AADCAgent.

The Windows service will be installed in this location and the Active Administrator Azure Active Directory Connect Health Monitoring Agent will run out of this location.

4
Copy the files to the folder on the target server.
5
Right-click Setup.exe, and select Run as Administrator.

-OR-

Select Start | Command Prompt (Admin), navigate to the folder where you copied the files, type Setup, and press Enter.

6
Type Y and press Enter to install the Active Administrator Azure Active Directory Connect Health Monitoring Agent.
7
Type a name for the agent, and press Enter.

If you press Enter without entering a name, the default is the computer name, which displays next to Agent name in the prompt.

8
Type the name of the Active Administrator server, and press Enter.
9
For the Azure Active Directory Connect database, you have two options.
▪
To use the default database, which is limited to 50,000 objects, type Y, and press Enter.
▪
To use another database, type N, and press Enter.
a
Type the name of the database server where the Azure Active Directory connect database is installed, and press Enter.
b
Type the name of the Azure Active Directory Connect database (default is ADSync), and press Enter.

After the installation is complete, use the Agents tab or Setup.exe from the command line to manage the Active Administrator Azure Active Directory Connect Health Monitoring Agent. See Managing the Azure Active Directory Connect Health Monitoring Agent.

Setting up the Azure Active Directory Connect application

Previous Next


 Active Directory Health > Analyzing Azure Active Directory > Setting up the Azure Active Directory Connect application

Setting up the Azure Active Directory Connect application

Setting up the Azure Active Directory Connect application is a two-step process. First create the Azure Active Directory Connect application in Azure, and then configure settings in Active Administrator.

Topics 
•
Adding the Azure Active Directory Connect application
•
Configuring Azure Active Directory Connect application settings

Adding the Azure Active Directory Connect application

Previous Next


 Active Directory Health > Analyzing Azure Active Directory > Setting up the Azure Active Directory Connect application > Adding the Azure Active Directory Connect application

Adding the Azure Active Directory Connect application

To create the Azure Active Directory application
1
Log in to the Microsoft Azure Portal (https://portal.azure.com) with your Microsoft account.
2
In the left navigation pane, select Azure Active Directory.
3
In the left navigation pane, select App Registrations.
4
Click New application registration.
5
In the Name box, type AAADConnectApp.
6
Select the Web app / API application type.
7
In the Sign-on URL box, type https://www.quest.com/products/active-administrator/.
8
Click Create.
9
Select the Azure AD application.
10
In the Settings list, click Properties.
11
Record the Application ID for later input into Active Administrator.
 
* 
IMPORTANT: Do not rely on the clipboard for saving the Application ID. Write it down or paste it into a .txt file. You need the clipboard to save the security key.
12
In the Settings list, click Required Permissions.
13
Select Windows Azure Active Directory API.
14
Enable the following permissions:
▪
Application: Read directory data
▪
Delegated: Access the directory as the signed-in user
▪
Delegated: Sign in and read user profile
▪
Delegated: Read and write directory data
15
Click Save.
16
Click Grant Permissions, and click Yes.
17
In the Settings list, click Keys.
18
Enter a key description, such as Azure Active Directory Connect app.
19
Choose a duration until the key expires.
20
Click Save.
 
* 
IMPORTANT: Copy the key value to the clipboard because you need it for the next step in Active Administrator. You might also want to past it into a .txt file for safekeeping. Once you leave the blade, you can never view the key value again as it is permanently hidden.

The next step is to configure the Azure Active Directory Connect app settings in Active Administrator. See Configuring Azure Active Directory Connect application settings.

Configuring Azure Active Directory Connect application settings

Previous Next


 Active Directory Health > Analyzing Azure Active Directory > Setting up the Azure Active Directory Connect application > Configuring Azure Active Directory Connect application settings

Configuring Azure Active Directory Connect application settings

To configure Azure Active Directory Connect application settings
1
Select Active Directory Health | Azure AD Connect.
2
Select the domain.
3
Open the Agents tab.
4
Click Azure App Settings.
5
In the Tenant box, enter the fully qualified name of the Azure Active Directory domain.
6
In the Application Name box, enter AAADConnectApp as the display name.
7
In the Application ID box, enter the Application ID that you recorded from the Azure portal.
8
In the Security Key box, enter the Security key that you copied from the Azure portal.
9
Click OK.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation