1. |
On the left navigation pane, click Settings > Control Panel to display the Control Panel, then click Network Settings to display the Network Settings page. |
2. |
3. |
4. |
5. |
The steps might vary depending on which DHCP server you are using. Use the following settings for options 066 and 067 on any DHCP server.
If you are not using the Microsoft DHCP, see the following Knowledge Base article for additional information: https://support.quest.com/kace-systems-deployment-appliance/kb/112037
◦ |
Set Option 066 to the IP address of the appliance. |
This option might appear as Next-Server, Boot Server Host Name or TFTP server name.
NOTE: You might not be able to set Option 66 on some Cisco networking equipment. As an alternate configuration, you can set the sname and 244 options to the appliance IP address. |
◦ |
This option might also appear as Boot File Name. Copy and paste the ipxe.efi or undionly.kpxe string as the Boot File Name option.
The appliance periodically checks for updated versions of the Media Manager. When a new version becomes available, a warning alert appears on the Home Dashboard. It is recommended to use the latest version of the KACE Media Manager on managed devices. For more information about the Dashboard, see Using the Dashboard.
1. |
On the left navigation pane, click Library, then click Library Overview to display the Library Overview page. |
2. |
Under Source Media, select Choose Action > Download Media Manager to display the Media Manager page. |
3. |
4. |
Click Run or Save to download the installation file to the device, then double-click the file to start the installation. |
5. |
This page allows you to specify and upload source media files to the appliance.
The name of the source media that you want to upload to the appliance. | |
This page allows you to specify and upload USMT (User State Migration tool) files to the appliance.
The path displayed reflects your setting of the WAIK or WADK Path on the General Settings page. | |
Click to upload the USMT (User State Migration Tool) to the appliance. |
The IP address of the system where the appliance is running. | ||
The IP address segments of the system where the appliance is running. | ||
The password of the Samba share on the appliance. The Samba share is used for storing and backing up files. This password must match the password that you entered in the SDA Samba Share Password field on the General Settings page. | ||
Windows only. The path to the Windows Assessment and Deployment Kit (WADK) or Windows Automated Installation Kit (WAIK) files that you want to upload. | ||
The theme of the Media Manager: Dark or Light. | ||
© ALL RIGHTS RESERVED. Feedback Conditions d’utilisation Confidentialité Cookie Preference Center