repair status
Use the repair status command to view the status of the last compare or repair job run. The repair status command can be used to view detailed status on a compare or repair job or a portion of a compare or repair job, or to view status on all compare and repair jobs for which SharePlex has history.
For details and examples about using the repair status command, see the job status command
Usage
| Supported sources: |
Oracle |
| Supported targets: |
Oracle |
| Authorization level: |
Operator (2) |
| Issued for: |
source system |
| Related commands: |
copy status, append status, compare status, job status |
Syntax
| repair status |
[job_id]
[job_id.table_id]
[all]
[full]
[detail]
[status] |
[ on host |
on host:portnumber |
on login/password@host |
on login/password@host:portnumber ] |
Syntax description
| job_id |
Displays status history for the job with the specified SharePlex-assigned job ID.
Example:
sp_ctrl(sysA)> repair status 2828.2 |
| job_id.table_id |
Displays status history for the job with the specified SharePlex-assigned job ID and table.
Example:
sp_ctrl(sysA)> repair status 2828.HR.SRC_TEST3 |
| all |
Displays a summary line for every job with history in the database.
Example:
sp_ctrl(sysA)> repair status all |
| full |
Displays the status of every object in the job. By default, the job status command displays the status of those objects not completed, or completed with an exceptional status.
Example:
sp_ctrl(sysA)> repair status2828 full |
| detail |
Displays detail information for every object reported upon. By default, the job status command displays a summary line for every object reported upon. Note that the detail information is the same as is displayed for the job_id.table_id option.
Example:
sp_ctrl(sysA)> repair status detail |
| status |
Displays status history for previous jobs with the specified status.
Example:
sp_ctrl(SysA)> repair status “Error” |
Remote options
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
report
Use this command to display the copy/append history for a table.
Usage
| Supported sources: |
Oracle |
| Supported targets: |
Oracle |
| Authorization level: |
Viewer (3) |
| Issued for: |
source system |
| Related commands: |
copy/append |
Syntax
| report |
source_owner.source_table
[copy | append]
[toeditor]
[for o.source_sid] |
[ on host |
on host:portnumber |
on login/password@host |
on login/password@host:portnumber ] |
Syntax Description
| source_owner.source_table |
This option specifies a source table for the synchronization report. Allow no spaces between components of the source owner and table name.
Examples:
sp_ctrl(SysA)> report s_user1.sync_single_tbl |
| copy | append |
This option returns results specific to either copy or append.
Examples:
sp_ctrl(SysA)> report copy s_user1.sync_single_tbl
sp_ctrl(SysA)> report append s_user1.sync_single_tbl |
| toeditor |
This option sets the target.
Examples:
sp_ctrl(SysA)> report s_user1.sync_single_tbl toeditor
sp_ctrl(SysA)> report copy s_user1.sync_single_tbl toeditor |
| for o.source_sid |
This option is used for specifying results specific to the provided source SID.
Examples:
sp_ctrl(SysA)> report s_user1.sync_single_tbl for o.source_sid1
sp_ctrl(SysA)> report copy s_user1.sync_single_tbl for o.source_sid1 |
Remote options
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
reset encryption key
Use the reset encryption key command to remove the AES encryption key that is being used by SharePlex to encrypt data.
For detailed instructions for configuring SharePlex encryption, see the SharePlex Administration Guide.
Usage
| Supported sources: |
Oracle |
| Supported targets: |
All |
| Authorization level: |
Operator (2) |
| Issues on: |
source system |
| Related commands: |
create encryption key, set encryption key, show encryption key |
Syntax
| reset encryption key |
[ on host |
on host:portnumber |
on login/password@host |
on login/password@host:portnumber ] |
Remote options
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
reset param
Use the reset param command to restore a parameter to its default value. The change takes effect based on the parameter’s set-at point:
- For a set-at point of Live, the change takes effect immediately.
- For a set-at point of Restart Process, the change takes effect the next time the affected SharePlex process is started.
- For a set-at point of Restart Cop, the change takes effect the next time sp_cop is started (do not reboot the system).
Using command options
The following are guidelines for resetting SharePlex parameters.
- To reset a parameter that was set with the set param command on a global basis (without process-specific options), use the reset param command without options.
- To reset a parameter that has a process-specific value (set with one of the set param process-specific options), use one of the reset param process-specific options. Process- specific options can be used for parameters in the following modules:
| export |
SP_XPT |
Export process |
| import |
SP_IMP |
Import process |
| capture |
SP_OCT |
Capture process |
| post |
SP_OPO |
Post process |
| read |
SP_ORD |
Read process |
| |
|
|
Viewing current parameter settings
To view the names of SharePlex parameters, their values and set-at points, and whether or not process-specific values are in effect, use the list param command, as shown in the following example which shows both a global value for the Export process and a process-specific value for Export to sysB.
| Parameter name |
Actual value |
Unit |
Set at |
| ---------------------- |
--------------------- |
------------ |
------------ |
| SP_XPT_SO_SNDBUF |
0 |
bytes |
Restart Process |
|
SP_XPT_SO_SNDBUF |
1024 |
bytes |
Restart Process |
|
|
|
|
|
Usage
| Supported sources: |
Oracle |
| Supported targets: |
All |
| Authorization level: |
Administrator (1) |
| Issued for: |
source or target system |
| Related commands: |
list param, set param |
Syntax
| reset param {paramname |
[to host]
[from host]
[for datasource]
[for datasource-datadest]
[queue queuename] |
[ on host |
on host:portnumber |
on login/password@host |
on login/password@host:portnumber ] |
Important: Before you begin using this command, please review all of this documentation. Improper use could result in lost target data and out-of-sync conditions.
Syntax description
| paramname |
The name of the parameter that you want to restore to its default value. This argument is not case-sensitive.
Example:
sp_ctrl(sysA)> reset param SP_XPT_SO_SNDBUF
This resets the parameter for all Export processes on the system. |
Process-specific command options
| to host |
This option resets an Export parameter (SP_XPT_) for the Export processes to a designated target system. To restrict the command’s effect to the Export process associated with a named export queue, follow this option with the [queue queuename] option.
Example:
sp_ctrl(sysA)> reset param sp_xpt_so_sndbuf to sysB
In this example, the parameter is reset for Export to sysB, but other Export processes are not affected. |
| from host |
This option resets an Import parameter (SP_IMP_) for the Import processes from a designated source system. To restrict the command’s effect to the Import process associated with a named export queue, follow this option with the [queue queuename] option.
Example:
sp_ctrl(sysD)> reset param sp_imp_wcmt_msgcnt from sysC
In this example, the parameter is reset for Import from sys C, but other Import processes are not affected. |
| fordatasource |
This option resets a Capture or Read parameter (SP_OCT_ or SP_ORD_) for a designated source Oracle instance.
- datasource is expressed as o.SID, where SID is the ORACLE_SID of the source instance.
Example:
sp_ctrl(sysA)> reset param sp_oct_replicate_dload for o.oraA
In this example, the parameter is reset for the Capture process for instance oraA, but other Capture processes are not affected. |
| for datasource-datadest |
This option resets a Post parameter (SP_OPO_) for all Post processes posting data from one database to another. To restrict the command’s effect to the Post process associated with a named post queue, follow this option with the [queue queuename] option.
- datasource is expressed as o.SID, where SID is the ORACLE_SID of the source instance.
- datadest is expressed as o.SID, where SID is the ORACLE_SID of the target instance.
Example:
sp_ctrl(sysC)> reset param sp_opo_cont_on_err for o.oraA-o.oraC
In this example, the parameter is reset for the Post process for instance oraA replicating to oraC, but other Post processes are not affected. |
| queue queuename |
This option resets a parameter for an Export, Import or Post process associated with a designated named queue.
Example:
sp_ctrl(sysA)> reset param sp_opo_poster_delay queue QA
In this example, the parameter is reset for the Post process associated with named post queue QA, but other Post processes are not affected. |
Remote options
These options enable you to issue the command on a remote machine and to script commands that include a login name, password, port number, or combination of those items.
| on host |
Execute the command on a remote system (one other than the one where the current sp_ctrl session is running). You are prompted for login credentials for the remote system. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA |
| on host:portnumber |
Execute the command on a remote system when a remote login and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on SysA:8304 |
| on login/password@host |
Execute the command on a remote system when a remote login, password, and host name must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA |
| on login/password@host:portnumber |
Execute the command on a remote system when a remote login, password, host name, and port number must be provided. If used, must be the last component of the command syntax.
Example: sp_ctrl(sysB)>status on john/spot5489@SysA:8304 |
