Chat now with support
Chat with Support

KACE Systems Deployment Appliance 9.1 Common Documents - Administrator Guide

About the KACE Systems Deployment Appliance Getting started Using the Dashboard Configuring the appliance Setting up user accounts and user authentication Configuring security settings Preparing for deployment Managing device inventory Using labels Creating a Windows or Linux Boot Environment Managing drivers Capturing images Capturing user states Creating scripted installations Creating a task sequence Automating deployments Performing manual deployments Managing custom deployments Managing offline deployments About the Remote Site Appliance Importing and exporting appliance components Managing disk space Troubleshooting appliance issues Updating appliance software Glossary About us Legal notices

Edit a system image

Edit a system image

You can rename, replace, remove, or edit K-Images and WIM images.

The System Image Detail page allows you to view the image settings, add a boot action, download the log files for the image, and set the options for how the appliance responds to errors. For Windows K-Images and WIM images, it also indicates if an image is sysprepped.

You can only edit system images on the appliance that captured them. For example, if you view the details of a system image captured by the appliance, you can edit that image on the System Image Detail page in the appliance Administrator Console, but not in the KACE Remote Appliance Console. If that system image is captured on the appliance and synced to the RSA, the System Image Detail page in the KACE Remote Appliance Console only allows you to review the system image details, but not to edit them. A link appears on this page that allows you to quickly navigate to the System Image Detail in the appliance Administrator Console, and edit the system image, as required.

The Installation Plan enables you to create a task sequence by adding the available pre-installation, mid-level, and post-installation tasks to run in the order that you place the tasks for the deployment.

The Browse Files option is only available for system images.

1.
Select the name of the image to display the System Image Detail page to edit the image.
2.
Click Browse Files to open the Browsing Files dialog box to edit the images with the following options:
Click Add Drive to add a partition. The drive name must contain an uppercase letter with a colon at the end.
To add the contents of a ZIP file, navigate to the directory where you want to add the files, click Add Zipped Files, navigate to the desired ZIP file, and click Submit, then click Commit. The contents of the zipped file are extracted to the selected location. To verify the contents of the system image after committing the change, when the dialog box closes, on the System Image Detail page, click Browse Files and review the list of files.
To add a directory, click Create Directory, then type the name of the new directory that you want to add.
To add a file, click Add File, navigate to the desired file, and click Submit.
To add the contents of a ZIP file, navigate to the directory where you want to add the files, click Add Zipped Files, navigate to the desired ZIP file, and click Submit, then click Commit. The contents of the zipped file are extracted to the selected location. To verify the contents of the system image after committing the change, when the dialog box closes, on the System Image Detail page, click Browse Files and review the list of files.
3.
Optional: WIM images only. Obtain additional system image information from the Windows registry.
a.
Next to Registry Info, click Show.
4.
Optional. Review the latest log file recorded during the system image capture, if applicable.
Click Server Log to see what the server recorded during the image capture.
Click Client Log to see what the server recorded during the image capture.
a.
Next to Config XML, click Show, and review the file contents that appear. The contents of the file are read only.
a.
Next to Task XML, click Show, and review the file contents that appear. The contents of the file are read only.
7.
Optional: Under Deploy Options, select Remove local files not in image when restoring the original image to a device, and when files have been added or modified on the device that is not in the original image.
9.
When you finish your edits, click Cancel to roll back the changes, or Save to apply the changes to the image.

Import WIM images

Import WIM images

You can import an existing WIM image to your collection of system images on the appliance. This allows you to manage system images created by a third-party vendor.

To import a WIM image, place a copy of the image file to the appliance's Samba clientdrop share.

During a WIM image import, you must specify its OS architecture. The appliance detects if the imported image is sysprepped or not.

NOTE: When the appliance starts importing a system image, if it detects an unattend file, it flags the image as sysprepped. If the image does not include that file, the appliance flags it as not being sysprepped.

This feature is available on the KACE Systems Deployment Appliance and the Remote Site Appliance (RSA).

1.
On the left navigation pane, click Deployments, then click System Images to display the Systems Images page.
2.
Select Choose Action > Import to display the System Image Import page.

Option

Description

Image Name

Type the name that you want to assign to this system image.

Operating System

Select the OS architecture used by the WIM image.

Wim File

Select the name of the WIM image file on the Samba clientdrop share.

4.
Click Import.
The System Image Import page closes and the System Images list page refreshes, showing the newly imported WIM image in the list. In the row containing the imported image, the Status column indicates the state of the import operation.
5.
Optional. When the import is complete, observe the imported image details, and make any changes, as required.
a.
On theSystem Images page, in the row containing the imported image, click the Name column to display the System Image Details page.
c.
To download the WIM image, in the Wim Management section, in the row containing the partition that you want to download, Actions column, click the Download icon. In the dialog box that appears, specify the name to give to the WIM file. Then click Save.
NOTE: Like the original WIM image, the replacement image must also be stored in the Samba clientdrop share of the associated KACE Systems Deployment Appliance or RSA, in order to be accessible.
To do that, also in the row containing the partition that you want to replace, in the Actions column, click the Replace icon. In the dialog box that appears, select the desired image file, and click Replace.
The System Image Details page closes and the System Images list page refreshes, indicating that the WIM image is being replaced in the row containing the imported image, in the Status column.
The contents of the log appear on the page. Use this information to find out whether the image was captured on the appliance or imported from the clientdrop share, who and when imported the image, or whether the image was replaced and by which user. If the image consists of multiple partitions, the log shows any operations performed on the specific partitions.

Managing answer files for Sysprepped images

Managing answer files for Sysprepped images

The appliance allows you to create and manage answer files for Sysprepped Windows images.

Sysprep (System Preparation) is a Microsoft tool for capturing OS images. It removes device-specific information from a Windows installation, allowing it to be deployed to other target devices.

NOTE: You can access this tool by clicking the Sysprep Creator Wizard link on the Library Overview page.

System administrators typically use answer files (unattend.xml) to fully automate the configuration and deployment of Windows systems. Each answer file contains a set of pre-defined values required by Windows system installation, eliminating the need for user interaction during the installation.

Create answer files for Sysprepped images

Create answer files for Sysprepped images

The Sysprep Creator Wizard guides you through the steps to create an answer file for Sysprepping an image.

1.
On the left navigation pane, click Library to expand the section, then click Sysprep Unattend Files to display the Sysprep Unattend Files page.
2.
Select Choose Action > Sysprep Creator Wizard.
3.
In the Sysprep Creator Wizard that appears, on the System Information page, complete the following steps:

Option

Description

Name

The name of the unattend.xml file configuration. The name you provide here identifies this configuration on the Sysprep Unattend Files page.

Operating System

The target operating system.

Architecture

The operating system architecture.

b.
Click Next.
4.
On the Configuration page, complete the following steps:

Option

Description

Registration Data

Owner

The name of the user for which the operating system is installed.

Organization

The name of the organization to which the operating system is licensed.

General Settings

Time Zone

The time zone where the system is used.

Location

The country where the system is used.

Primary Language

The language the operating system uses.

Fallback Language

The fallback language of the operating system, in case the selected language is not available.

Local Administrator Account

Username

The name of the local administrator's account for this system.

Password

The administrator user's password.

Enable the built-in Administrator Account

Select this option if you want to enable the built-in Administrator account on the target system. This is useful if you want to run or install programs and apps on the target system before a user account is created.

Number of times to auto-login

Specify the number of times the system automatically logs in to the account defined in the Networking area.

Networking

Join a workgroup

Select this option if you want the target system to join a specific work group, and in the Workgroup Name field, specify the name of the group.

Join a domain

Select this option if you want the target system to join a specific domain, and provide the following information:

Fully Qualified Domain Name (FQDN): The fully qualified domain name.
Credentials to join the domain: Specify the Username and Password for accessing this domain.
b.
Click Next.
5.
On the Windows Setting page, complete the following steps:

Section

Description

Out of Box Experience

Use this section to provide the Windows Out-Of-Box Experience (OOBE) settings, as required. For example, you can select the size of icon, disable automatic daylight savings, or hide wireless setup. For complete information about these settings, see your Windows documentation.

Windows Activation

Specify the Windows system settings, such as if and when to install Windows updates, replicate the profile of the user running Sysprep, or disable User Access Control (UAC). For details, see your Windows documentation.

b.
Click Next.
6.
On the Miscellaneous Setting page, complete the following steps:

Option

Description

Internet Explorer Options

Enable IE Options

Select if you want to enable Internet Explorer options and provide the related settings that appear, such as whether to block pop-ups or disable the First Run wizard.

OEM Information

Enable OEM Information

Select if you want to specify OEM options and provide the related settings that appear, such as the manufacturer name or device model.

Taskbar Links

Enable Taskbar Links

Select if you want to specify links on the Windows taskbar, provide the related links.

Advanced Options

Enable Advanced Options

Select if you want to enable advanced Windows options such as whether to Persist all installed Plug and Play devices, or to Reset activation grace-period timer.

b.
Click Save.
Your configuration for creating answer files for Sysprepped images is complete. The Sysprep Creator Wizard closes and the Sysprep Creator Wizard Options page appears.
7.
Review the options listed on the Sysprep Creator Wizard Options page, and make a selection, as applicable.
View Sysprep Unattend File Detail: Click to see the contents of the unattend.xml file that can be generated using your newly created configuration. The Sysprep Unattend File Detail page appears, showing the unattend.xml file details. For more information about this page, see View and edit answer file configurations.
View Sysprep Unattend Files List: Click to see the Sysprep Unattend Files list page. This page shows all configurations defined on the appliance that can be used to generate Sysprepped unattend.xml files.
Download Unattend File: Click to download the unattend.xml file generated using this newly created configuration.
Download Unattend File with KACE Image Prep: Click to download the unattend.xml file generated using this newly created configuration, together with the KACE Image Prep.
Download KACE Image Prep: Click to download the KACE Image Prep.
NOTE: You can also download the KACE Image Prep using the Choose Action menu on the Sysprep Unattend Files page.
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating