Converse agora com nosso suporte
Chat com o suporte

SharePlex 10.0 - Reference Guide

About this guide Conventions used in this guide SharePlex commands SharePlex parameters General SharePlex utilities Database Setup utilities SharePlex environment variables

hana_cleansp

Description

Use the hana_cleansp utility to remove the current replication state on a system where SharePlex is replicating to a HANA target.

Caution: The effects of hana_cleansp are not reversible. To stop replication without restoring it to an initial state, you might be able to use the abort config or purge config command.

Usage guidelines

  • To use this utility, the Korn (ksh) shell must be installed on the system. The utility calls this shell during processing.

  • hana_cleansp must be run on all HANA target systems in the replication configuration.
  • To fully remove the replication environment, run the ora_cleansp utility on all Oracle source systems in the replication configuration. To verify if and when hana_cleansp or ora_cleansp was run on a system, view the SharePlex event log on that system.

What this utility does

hana_cleansp does the following on the target system:

  • Truncates the SHAREPLEX_OPEN_TRANS internal table in the SharePlex schema and any other SharePlex-installed tables as applicable.
  • Removes the following from the variable-data directory: the queue files, the process log files, the contents of the statusdb (but not the file), the contents of the dump and state directories, and all but one entry in the event log (the status entry for hana_cleansp)

hana_cleansp preserves the following:

  • The SharePlex database, account, and password, and only cleans the data in the SharePlex tables.
  • User-created files such as the paramdb and the target configuration settings

Supported databases

HANA on supported platforms

Run hana_cleansp

  1. Stop all SharePlex processes on the system.
  2. Shut down sp_cop.
  3. Run the hana_cleansp utility from the bin sub-directory of the SharePlex product directory with the following syntax:

    C:\users\splex\bin>hana_cleansp [port number ] database_name/user_name

    where:

    • port number is the port number of the SharePlex instance, if other than the default of 2100.
    • database_name is the name of the SharePlex database.
    • user_name is the name of the SharePlex user account.
  4. Enter the password at the prompt.

    Enter the password for the SharePlex User :

  5. Type Y to confirm that you want to run cleanup for this SharePlex instance.

    Are you sure you want to perform the clean for '/splex/vardir/var2200' and port 2200? [N] : Y

mss_cleansp

Description

Use the mss_cleansp utility to remove the current replication state on a SQL Server system.

Caution:

  • Running mss_cleansp can be acceptable in a test or demonstration environment, but it rarely is appropriate in a production environment. The effects of the cleanup are not reversible.
  • To fully remove the replication environment, run the mss_cleansp utility on the target system. If the source system is Oracle, run the ora_cleansp utility. To verify if and when mss_cleansp or ora_cleansp was run on a system, view the SharePlex event log on that system.
  • If the SharePlex instance for which you are running mss_cleansp is configured to post to multiple databases, mss_cleansp will remove the replication configuration and supporting data for all of those databases.

mss_cleansp does the following on the target system:

  • Truncates the SHAREPLEX_OPEN_TRANS internal table and any other SharePlex-installed tables as applicable.
  • Removes the following from the variable-data directory: the queue files, the process log files, the contents of the statusdb (but not the file), the contents of the dump and state directories, and all but one entry in the event log (the status entry for mss_cleansp)

mss_cleansp preserves the following:

  • The SharePlex database, account, and password, and only cleans the data in the SharePlex tables.
  • User-created files such as the paramdb and the target configuration settings

Supported databases

Microsoft SQL Server on Windows

Run mss_cleansp

  1. Stop all SharePlex processes on the system.
  2. Shut down sp_cop.
  3. Run the mss_cleansp utility from the bin sub-directory of the SharePlex product directory with the following syntax:

    C:\users\splex\bin>mss_cleansp [port number ] database_name/user_name

    where:

    • port number is the port number of the SharePlex instance, if other than the default of 2100.
    • database_name is the name of the SharePlex database.
    • user_name is the name of the SharePlex user account.
  4. Enter the password at the prompt.

    Enter the password for the SharePlex User :

  5. Type Y to confirm that you want to run cleanup for this SharePlex instance.

    Are you sure you want to perform the clean for 'C:\splex\vardir\var2200' and port 2200? [N] :Y

mysql_cleansp

Description

Use the mysql_cleansp utility to remove the current replication state on a MySQL system.

Caution: Running mysql_cleansp can be acceptable in a test or demonstration environment, but it rarely is appropriate in a production environment. The effects of the cleanup are not reversible.

Usage guidelines

  • To use this utility, the Korn (ksh) shell must be installed on the system. The utility calls this shell during processing.

  • mysql_cleansp must be run on all MySQL target systems in the replication configuration.
  • To fully remove the replication environment, run the ora_cleansp utility on all Oracle source systems in the replication configuration. To verify if and when mysql_cleansp or ora_cleansp was run on a system, view the SharePlex event log on that system.

What this utility does

mysql_cleansp does the following on the target system:

  • Truncates the SHAREPLEX_OPEN_TRANS internal table and any other SharePlex-installed tables as applicable.
  • Removes the following from the variable-data directory: the queue files, the process log files, the contents of the statusdb (but not the file), the contents of the dump and state directories, and all but one entry in the event log (the status entry for mysql_cleansp)

mysql_cleansp preserves the following:

  • The SharePlex database, account, and password, and only cleans the data in the SharePlex tables.
  • User-created files such as the paramdb and the target configuration settings

Supported databases

MySQL on supported UNIX platforms

Run mysql_cleansp

  1. Stop all SharePlex processes on the system.
  2. Shut down sp_cop.
  3. Run the mysql_cleansp utility from the bin sub-directory of the SharePlex product directory with the following syntax:

    C:\users\splex\bin>mysql_cleansp [port number ] database_name/user_name

    where:

    • port number is the port number of the SharePlex instance, if other than the default of 2100.
    • database_name is the name of the SharePlex database.
    • user_name is the name of the SharePlex user account.
  4. Enter the password at the prompt.

    Enter the password for the SharePlex User :

  5. Type Y to confirm that you want to run cleanup for this SharePlex instance.

    Are you sure you want to perform the clean for '/splex/vardir/var2200' and port 2200? [N] : Y

ora_cleansp

Description

Use the ora_cleansp utility to remove the current replication state on a system, including deactivating configurations.

Caution:

  • Running ora_cleansp can be acceptable in a test or demonstration environment, but it rarely is appropriate in a production environment. The effects of the cleanup are not reversible.
  • If the SharePlex instance for which you are running ora_cleansp is configured to capture from or post to multiple databases, ora_cleansp will remove the replication configuration and supporting data for all of those databases.

Supported databases

Oracle on Unix, Linux, and Windows

Other alternatives to ora_cleansp

Before running ora_cleansp, consider the following alternatives:

  • To stop activity for a configuration without restoring replication to an initial state, you might be able to use the abort config or purge config command in sp_ctrl.
  • To truncate the SharePlex tables without purging files in the variable-data directory, you can run the cleanup.sql script from the bin sub-directory (Unix and Linux systems) or the util sub-directory (Windows systems) of the product directory.
  • On Unix and Linux systems, you can purge the files in the variable-data directory, without truncating the SharePlex tables, by running the cleanup.sql script from the bin sub-directory of the SharePlex product directory.

Shell requirement

To use this utility, the Korn (ksh) shell must be installed on the system. The utility calls this shell during processing.

How ora_cleansp works

ora_cleansp works in two stages to restore replication to an initial state, as follows:

truncate internal tables: First ora_cleansp truncates any SharePlex internal tables that can be truncated safely. It does not remove the SharePlex Oracle user, password, or demonstration objects.

clean the variable-data directory: Next, ora_cleansp removes the following components from the SharePlex variable-data directory:

    • The queue files in the rim sub-directory.
    • The log files in the log sub-directory. The Event log retains one entry reflecting the outcome of the ora_cleansp procedure.
    • The contents of the statusdb file in the data sub-directory.
    • The contents of the dump and state sub-directories.
    • Any transactions in the oos sub-directory, if the SP_OPO_SAVE_OOS_TRANSACTION parameter is enabled.

ora_cleansp preserves user-created files such as configuration files, conflict-resolution files, transformation files, hint files, the paramdb, and the oramsglist file.

ora_cleansp deactivates configurations. To start replication after running ora_cleansp, you must activate a configuration.

Run ora_cleansp

Important! ora_cleansp must be run on all source and target systems to restore replication to an initial state. To verify if and when ora_cleansp was run on a system, view the Event Log on that system.

  1. Log on as a SharePlex Administrator.
  2. [Unix and Linux ONLY] Set the SP_SYS_VARDIR environment variable to point to the SharePlex variable-data directory. If you are running multiple instances of sp_cop using multiple variable-data directories, set SP_SYS_VARDIR for the variable-data directory that you want to clean up.

    ksh shell:

    $export SP_SYS_VARDIR=/SharePlex_vardir_absolute_path

    csh shell:

    $setenv SP_SYS_VARDIR /SharePlex_vardir_absolute_path
  3. Run sp_ctrl from the bin sub-directory of the SharePlex product directory.
  4. Shut down sp_cop.

    sp_ctrl> shutdown
  5. Verify that all SharePlex processes are stopped by using either the ps -ef | grep sp_ command on Unix and Linux systems or Taskmgr from the SpUtil program on Windows systems.
  6. Kill all orphan SharePlex processes by using either the kill -9 command on Unix and Linux systems or the KillSharePlex.bat program on Windows systems.
  7. [Unix and Linux ONLY] If you have not done so already, view the oratab file to determine the values for ORACLE_HOME and ORACLE_SID for the instance.

    $cd /etc
    $ more oratab
  8. [Unix and Linux ONLY] Set the ORACLE_HOME and ORACLE_SID environment variables.

    ksh shell:

    $export ORACLE_HOME=[value from oratab file]
    $export ORACLE_SID=[value from oratab file]

    csh shell:

    $ setenv ORACLE_HOME [value from oratab file]
    $ setenv ORACLE_SID [value from oratab file]
  9. On the command line of the operating system, change directories to the bin sub-directory of the SharePlex product directory (note: this must be the current working directory).

  10. Run ora_cleansp as the SharePlex user account in the Oracle instance. Note: If run as a different user, ora_cleansp does not truncate the SharePlex tables.

    Additionally, on Unix and Linux, include the database/datasource name (Oracle_SID) as defined in the connections.yaml file.

    Unix and Linux:

    $ ./ora_cleansp database_name/SharePlex_username[/SharePlex_password]

    (For an Oracle PDB): $./ora_cleansp tns_alias for pdb/SharePlex_username[/SharePlex_password]

    Windows:

    C:\users\splex\bin>ora_cleansp SharePlex_username[/SharePlex_password]

    (For an Oracle PDB): C:\users\splex\bin>ora_cleansp SharePlex_username[/SharePlex_password@tns_alias for pdb]

    Important! On Windows, if you installed SharePlex on any port other than the default of 2100, use the -r option to specify the port number. For example, in the following command the port number is 9400:

    C:\users\splex\bin>ora_cleansp SharePlex_username[/SharePlex_password] -r9400

  11. View the Event Log after you run the utility to confirm its results.

    Note: If the utility generates an error message stating that it cannot remove the .../ save_SharePlex_version directory, you can ignore the message and remove this directory.

Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação