Converse agora com nosso suporte
Chat com o suporte

Rapid Recovery 6.8 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

Replication

Use the replication command to control existing replication between two Rapid Recovery Cores and manage pending replication requests.

NOTE: This command succeeds the Replicate command, which establishes the connection—called pairing—between the Cores and uses a seed drive for the initial data transfer. For more information about this command, see Replicate.

Usage

The usage for the command is as follows:

/replication [-list [incoming | outgoing | pending] -accept | -deny | -ignore | -delete | -edit] -id [replication ID] -protectedserver [name | name repository] -responsecomment [comment] -deleterecoverypoints -scheduletype [type] -dailystarttime [time] -dailyendtime [time] -weekdaystarttime [time] -weekdayendtime [time] -weekendstarttime [time] -weekendendtime [time]

Command Options

The following table describes the options available for the replication command:

Table 57: Replication command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used
-list
The list of incoming or outgoing replication jobs or pending replication requests.
-accept
Accepts the replication request.
-deny
Denies the replication request.
-ignore
Ignores the replication request.
-delete
Use this option to delete an existing replication job or a machine from the replication job. Specify only the -id parameter to delete an entire replication relationship, or specify both the -id and -protectedserver parameters to delete only specific machines from replication.
-edit
Edits the schedule of existing replication jobs.
-id
The identifier for the replication job or pending replication request. It can be a remote Core ID, host name, customer ID, email address, or pending replication request ID.
-protectedserver
When responding to a replication request, use this option to apply your response to list of protected servers with a repository name or ID. Use the parameter "all" to apply response to all requested machines.
-responsecomment
The comment you provide with the response to a pending replication request.
-deleterecoverypoints
Use this option if specific recovery points from a deleted replicated machine should also be removed.
-scheduletype
If you use the -edit option, this option specifies the type of replication schedule. Include one of the following four values:
  • atalltimes - Automatically replicate at any time.
  • daily - Replicate daily. Specify the -dailystarttime and -dailyendtime parameters.
  • custom - When using daily replication, use this value to schedule replication on weekdays or weekends. Specify the -weekdaystarttime, -weekdayendtime, -weekendstarttime, and -weekendendtime parameters.
-dailystarttime
Use only for the daily value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the earliest time of day when you want replication to start.
Confirm with Dev.
-dailyendtime
Use only for the daily value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the latest time of day when you want replication to start.
Confirm with Dev.
-weekdaystarttime
Use only for the custom value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the earliest time of a weekday when you want replication to start.
Confirm with Dev.
-weekdayendtime
Use only for the custom value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the latest time of a weekday when you want replication to start.
Confirm with Dev.
-weekendstarttime
Use only for the custom value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the earliest time of the weekend when you want replication to start.
Confirm with Dev.
-weekendendtime
Use only for the custom value of the -scheduletype option. It is used to establish a window of time for when replication should occur. Use this option to specify the latest time of the weekend when you want replication to start.
Confirm with Dev.

Examples:

List all incoming replication:

>cmdutil /replication -list incoming

Accept pending replication requests for two protected machines:

>cmdutil /replication -accept -id customer@email.address -protectedserver 10.10.1.1 Repository1 10.10.1.2 Repository2 -responsecomment A response comment

Deny a pending replication request:

>cmdutil /replication -deny -id customer@email.address

Delete existing replication with replicated recovery points:

>cmdutil /replication -delete -id RemoteServerHostname -deleterecoverypoints

Remove two machines from existing replication:

>cmdutil /replication -delete -id "156d7a46-8e44-43f4-9ed8-60d998e582bf" -protectedserver 10.10.1.1 10.10.1.2

Edit schedule of replication with specified weekday and weekend times:

>cmdutil /replication -edit -id RemoteServerHostName -scheduletype custom -weekdaystarttime "9:00 AM" -weekdayendtime "6:00 PM" -weekendstarttime "9:00 AM" -weekendendtime "6:00 PM"

ResizeDedupeCache

Use the resizededupecache command to change the size of the deduplication cache location for the Azure repository.

Usage

The usage for the command when resizing the deduplication cache location for an Azure repository is as follows:

/resizededupecache -core [host name] -user [login] -password [password] –repository [repository id] -dedupecachesize [cache size]

Command Options

The following table describes the options available for the resizededupecache command:

Table 58: ResizeDedupeCache command options
Option Description
-?
Display help on the command.
-core
Optional. Remote core host machine IP address (with an optional port number). By default, the connection is made to the core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-repository
ID of the Azure repository.
-dedupecachesize
Optional. Amount of memory to be allocated for deduplication cache. Available units are B, KB, MB, and GB. The default value is 1.5 GB.

Examples:

Resize the deduplication cache for an Azure repository:

>cmdutil /resizededupecache -repository AzureStorageID -dedupecachesize 200 Gb -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd

RestartCoreService

If the Core service on the Core machine is stopped, use the restartcoreservice command to start it again.

Usage

The usage for the command is as follows:

/restartcoreservice -core [host name] -user [user name] -password [password] -cancelactivejobs [true | false] -wait [time in seconds]

Command Options

The following table describes the options available for the restartcoreservice command:

Table 59: RestartCoreService command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-cancelactivejobs
Optional. Use this option to cancel all active jobs on the Core. The default setting is "false."
-wait
Optional. This option indicates that the command should wait until the Core service is fully restarted for the specified period of time in seconds before canceling active jobs.

Example:

Restart the Core service:

>cmdutil /restartcoreservice -core 10.10.127.42 -user admin -password 676df#df -cancelactivejobs true -wait 600

RestoreAgent

The restoreagent command lets you restore a protected machine or volume from a specific Rapid Recovery recovery point.

Usage

The usage for the command is as follows:

/restoreagent -protectedserver [name | IP address] -rpn [recovery point number] -volumes [IDs | names | all] -targetmachine [name] -targetvolume [volume name] -forcedismount -autorestart

Command Options

The following table describes the options available for the restoreagent command:

Table 60: RestoreAgent command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default, the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you must also provide a password. If none is provided, then the credentials for the logged-on user are used.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none is provided, then the credentials for the logged-on user are used.
-protectedserver
The name or IP address of the server you want to restore.
-rpn
The identification number of the recovery point you want to use to restore the machine. To find the correct number, use the command /list rps.
-volumes
The IDs or names of the volumes you want to restore. To restore all protected volumes, use -volumes all.
-targetmacchine
The name of the machine to which you want to restore the protected machine.
-targetvolume
The name or ID of the volume to which you want to restore the machine.
-forcedismount
Optional. Use this option to force the dismount of the database on demand.
-autorestart
Optional. Use this command if restarting an Exchange Server machine is necessary.

Example:

Restore a machine to a protected machine with the IP address 192.168.20.130, including the force database dismount option:

>cmdutil /restoreagent -protectedserver 192.168.20.130 -rpn 259 -volumes "F:" "E:" "C:" -targetmachine 192.168.20.174 -targetvolume "E:" "G:" "F:" -forcedismount
Documentos relacionados

The document was helpful.

Selecione a classificação

I easily found the information I needed.

Selecione a classificação