Submitting forms on the support site are temporary unavailable for schedule maintenance. If you need immediate assistance please contact technical support. We apologize for the inconvenience.
Initializes the NVRAM that resides on the DR Series system hardware appliance on which the DR Series system software is installed.
CAUTION:
Carefully consider before attempting to use the DR Series system CLI --reinit_nvram command. This command should only be used under the direction of Technical Support because it permanently erases all data stored on the NVRAM in the DR Series system hardware appliance. This command is only to be used when replacing the NVRAM in your hardware appliance. Contact Technical Support and seek assistance before you use this command.
Syntax
maintenance --hardware --reinit_nvram
Result
Please enter administrator password:
WARNING: ALL NVRAM DATA WILL BE ERASED!
Do you want to continue (yes/no)?
Type yes to continue or no to return to the system prompt.
WARNING: All previous Event & Alert information will be deleted.
Do you want to continue? (yes/no) [n]? y
Please enter the administrator password:
The Hardware Health Monitor has been successfully restored.
You can find online support help for Quest *product* on an affiliate support site. Click continue to be directed to the correct support content and assistance for *product*.
The Quest Software Portal no longer supports IE8, 9, & 10 and it is recommended to upgrade your browser to the latest version of Internet Explorer or Chrome.