Chat now with support
Chat with Support

DR Series Software 4.0 - Command Line Reference Guide

Introduction to the DR Series System Command Line Reference Guide Introducing the DR Series system Managing the DR Series system
Alerts Commands Authenticate Commands Network
Network Command Usage network --show network --delete network --restart network --setdhcp network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>] network --create_bond network --create_eth network --add_member network --setdns [--suffix <dns suffix>] [--primary <IPv4/IPv6 address>] [--secondary <IPv4/IPv6 address>] network --setbonding --bondif <bondN> [--mode <ALB | 802.3ad>] [--mtu <supported MTU range 512 - 9000>] network --update network --factory_reset network --host network --route network --nslookup --destination <ip address | hostname> network --traceroute --destination <ip address | hostname> network --ping --destination <ip address | hostname> [--tries <number>] [--size <number>] [--interface <bondN | ethN>] network --blink network --enable network --disable network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [--clients] [--port_mapper] [--network_config] [--show_active <NFS|CIFS|OST|RDS|NDMP|ISCSI|FC>] [--interface <bondN | ethN>] network --troubleshoot --gateway --interface <bondN | ethN> network --troubleshoot [--show_active <NFS| CIFS|OST|NDMP|ISCSI|RDS>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>] [--file_size <0 - 100>] [--stop] [--host <ip address list>] [--interface <bondN | ethN>] network --tcpdump [--pkt_size <128 - 32768>] network --tcpdump [--file_size <0 - 100>] network --tcpdump [--host <ip address list>] network --tcpdump [--port <nfs | windows | replication | ost | rds>] network --iperf_client --server <ip address | hostname> [--port <number>] [--window_size <num bytes [KB/MB]>] [--interval <num seconds>] [--time <num seconds>] network --iperf_server [--port <number>] [--window_size <num bytes [KB/MB>] network --help
OST RDA Stats Storage Group commands System
System Command Usage system --show [--config] system --show [--hardware] system --show [--storage] [--type <boot | internal | external>] [--service_tag <service tag>] system --show [--storage] system --show [--license] [--verbose] system --show [--ntp] system --show [--version] system --show [--timezones [Region]] system --show [--upgradefile] system --show [--upgradehistory] system --show [--marker] system --show [--replication_traffic] system --show [--opdup_traffic] system --show [--backup_traffic] system --show [--mgmt_traffic] system --init system --init --secure_erase <1–pass/3-passes/7-passes> system --reboot system --shutdown system --upgrade system --license [--validate] [--add] system --setname --name <node_name> system --setdate [--date <date>] [--timezone <Region/Zone>] system --setntp [--add <server name>] system --setntp [--delete <server name>] system --setntp [--enable] system --setntp [--disable] system --setntp [--adjust_time] system --setlogin system --telnet [--enable | --disable] system --datacheck --enable system --datacheck --disable system --datacheck --throttle system --marker [--enable] [--disable] system --verify_on_read [--enable] [--disable] system --add_storage --enclosure <service tag> system --storage [--set_usage_alert <70% - 90%>] system --storage [--blink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num>] system --storage [--unblink] [--type <internal | external>] [--service_tag <service tag>] [--disk <slot num> system --mgmt_traffic system --backup_traffic system --replication_traffic system --opdup_traffic system --support_agent --register system --support_agent --unregister system --support_agent --stats system --support_agent --status system --help
User Virtual Machine
Maintaining the DR Series System
Diagnostics Maintenance
Maintenance Command Usage maintenance --filesystem [--start_scan [verify_data | verify_rda_metadata | verify_metadata] [--storage_group <name>] maintenance --filesystem [--stop_scan] maintenance --filesystem [--scan_status] maintenance --filesystem [--scan_report [verbose]] maintenance --filesystem [--repair_status [verbose]] maintenance --filesystem [--repair_history [verbose]] maintenance --filesystem [--scan_restart [verify_data | verify_rda_metadata | verify_metadata]] maintenance --filesystem [--repair_now] maintenance --filesystem [--reclaim_space] maintenance --filesystem [--stop_reclaim_space] maintenance --filesystem [--clear_quarantine] maintenance --filesystem --show_throughput maintenance --configuration [--backup] maintenance --configuration [--restore] maintenance --configuration [--reinit_dictionary] maintenance --configuration [--reset_web_certificate] maintenance --hardware [--reinit_nvram] maintenance --hardware [--restore_hw_db] maintenance --hardware [--motherboard_replaced] maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> | service tag>] --clear_foreign] maintenance --remote_access [--show] maintenance --remote_access [--enable] maintenance --remote_access [--racreset] maintenance --remote_access [--static_ip] [--ip <IPv4/IPv6 address>] [--netmask <netmask>] [--gateway <IPv4/IPv6 address>] [--device <lom1|lom2|lom3|lom4>] maintenance --remote access [--disable] maintenance --vdisk --check_consistency --type <boot|internal|external> [--service_tag <service tag>] maintenance --help
Managing DR Series System Storage Operations
System Storage Operation Commands Connection Container VTL NDMP iSCSI FC Replication Seed Schedule
Data Integrity Checking Additional Linux Commands

Introducing the DR Series system

A purpose-built backup-to-disk appliance, the DR Series system provides advanced deduplication and compression technology to store data most efficiently. The DR Series hardware appliances are 2U, rack-based, system backup storage repositories, that include deduplication and compression technology in their operating systems. A virtual machine (VM) version is also available (that is connected via a license with a DR Series hardware appliance) to provide robust, disk-based data backup capability on Virtual Machine host servers, while taking advantage of replicating to a deduplication-enabled appliance.

Data Protection | DR Series of backup and deduplication appliances support all the major backup software applications in use today and can lower your backup storage costs to as little as $.16/GB while reducing your total cost of ownership. The purpose built appliances achieve these results using patented Rapid technology as well as built-in, variable block-based deduplication and compression. The DR Series helps you to:

  • Reduce your backup storage footprint

  • Speed up recovery

  • Reduce or eliminate the need for physical tapes for backup

  • Optimize network bandwidth by lowering the amount of data sent to disaster recovery sites

The DR Series system includes the following features:

  • Advanced data protection and disaster recover

  • Two management interfaces: a command line interface (CLI) or a system graphical user interface (GUI) for the system software to manage storage containers.

  • Support for a wide variety of data backup installations and environments.

  • A simple installation process that provides full, intuitive remote setup and management capabilities.

The system is available in many drive capacities to fit SMB, enterprise, and remote office environments. The internal system drive capacity and available physical capacities of the DR Series system vary, depending on your system type and drives installed. For details about specific drive capacities and models available, see the DR Series System Interoperability Guide or the latest DR Series System Release Notes.

Understanding the DR Series system CLI

The DR Series system command line interface (CLI) provides the means for managing the status, data capacity, storage savings, and throughput of data containers.

Note: An online data verification or data-checking feature called Data Check is enabled by default on the DR Series system. For more information about Data Check, see Data Integrity Checking.

Accessing the DR Series system CLI commands

  1. Launch a terminal emulation application and start the process for logging in to the DR Series system.
  2. In Host Name (or IP address), type the host name or IP address for the DR Series system, and click Open.
  3. At the system prompt, enter the username for the Administrator:
    • Type administrator
    • Press <Enter>
  4. At the administrator password prompt, enter the password for the Administrator (the default is St0r@ge!):
    • Type St0r@ge!
    • Press <Enter>
    The DR Series system administrator prompt is displayed.
  5. At the administrator prompt, type help.
    The DR Series system CLI commands are displayed.

DR Series system CLI commands overview

For more information on each command group, run the following command:

<command name> --help show
Table 1. DR Series System CLI Commands Overview
Command Group Description

alerts

View system events and configure email notifications, contact information, and daily reports.

authenticate

Configure Active Directory (AD) authentication.

connection

Configure NFS | CIFS | OST | RDS | NDMP| ISCSI | FC access to a container.

container

Configure a file system to share over NFS | CIFS | OST | RDS | NDMP | ISCSI | FC.

diagnostics

Gather log information for support issues.

help

Display this help message.

iscsi

Manage and view iscsi connection types for VTL containers.

ndmp

Manage and view ndmp connection types for VTL containers.

fc Manage and view fibre channel connection types for VTL containers.

maintenance

Repair the data and state of the system.

network

Configure networking properties.

ost

Configure OST for Veritas (formerly Symantec) backup applications.

rda

Configure Rapid Data Access (RDA) for the NetVault application.

replication

Manage replication between systems.

seed

Configure and manage seeding import or export.

schedule

Manage replication and cleaner schedules in the system.

stats

View statistics for system components.

storage_group Manage and view the storage groups on a DR Series system

system

Manage and view the system configuration.

user

Enable or disable service and root accounts on the node.

virtual machine

Manage and view DR2000v virtual machines.

vtl

Manage and view VTL container types.

grep

more

System tools

Managing the DR Series system

Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating