Before loading cleaning tapes, you must configure the slots that can hold the cleaning media. You can configure cleaning slots from Edit Device page. For more information, see Modifying a library.
NetVault lets you specify how many times a cleaning tape can be used for drive cleaning operations. You can configure the cleaning lives property from the Manage Devices page.
1 |
In the Navigation pane, click Manage Devices. |
3 |
Click Life. |
4 |
In the Lives box, enter or select the number of times the tape can be used for cleaning a drive. |
5 |
Click OK to save the settings and close the dialog box. |
You can set up automatic cleaning routines for tape drives from the Manage Devices page. NetVault lets you use the following options to define a cleaning routine: number of days, amount of data transferred, hours of use, and number of read or write errors.
1 |
In the Navigation pane, click Manage Devices. |
3 |
Click Clean Properties. |
4 |
In the Cleaning Interval dialog box, configure the following options. |
To perform drive cleaning after every x days, select the Apply check box to the left, and type or select the value. | |
To perform drive cleaning after every x GiB of data transfer, select the Apply check box to the left, and type or select the value. | |
To perform drive cleaning after every x hour, select the Apply check box to the left, and type or select the value. | |
To perform drive cleaning after every x*100 soft read/write errors, select the Apply check box to the left, and type or select the value. |
5 |
Click OK to save the settings and close the dialog box. |
You can manually submit a drive cleaning request from the Tape Drive Management page.
1 |
In the Navigation pane, click Manage Devices. |
3 |
Click Clean. |
© ALL RIGHTS RESERVED. Terms of Use Privacy Cookie Preference Center